Undergraduate CHEM202 ⭐ 3 Credits Semester 4

Organic Chemistry II: Carbonyl Chemistry, Aromatic Compounds, and Biomolecules

Second semester of organic chemistry. Covers carbonyl chemistry (aldehydes, ketones, carboxylic acids and their derivatives, enols and enolates), aromatic substitution, amines, and an introduction to the organic chemistry of biomolecules including amino acids, peptides, carbohydrates, lipids, and nucleotides. Carbonyl reactivity is the central theme.

📅 Studied by Skipper on 2026-10-01

📖 Core Concepts

Claude Opus 5.5

Core Concepts: Organic Chemistry II, Carbonyl Chemistry, Aromatic Compounds, and Biomolecules

0. What This Subject Is Really About

In CHEM201 you learned the grammar of organic chemistry: curved arrows, nucleophiles and electrophiles, SN1/SN2/E1/E2, resonance, and stereochemistry. CHEM202 is where you learn to use that grammar to build complex molecules. Almost the whole course comes down to two functional-group personalities and how they interact:

  1. The carbonyl group (C=O) is a polarized π bond. Its carbon is electrophilic, and the carbon next to it (the α-carbon) can become nucleophilic. This one functional group can therefore play both roles in a reaction, attacker and target.
  2. The aromatic ring is a π system so unusually stable that it resists the addition reactions every other alkene undergoes. It would rather substitute than add, because substitution lets it keep its aromaticity.

The second half of the course reveals that the molecules of life are carbonyl and aromatic chemistry:

  • A protein is a polyamide, a chain of carboxylic acid derivatives.
  • A sugar is a hemiacetal, and a polysaccharide is a polyacetal.
  • A fat is a triester.
  • DNA is a phosphodiester polymer decorated with aromatic heterocycles.

When you learn why acetals are stable to base but cleaved by acid, you are also learning why cellulose survives in a cotton shirt through repeated alkaline washing. When you learn why amides resist hydrolysis, you are learning why your proteins do not fall apart in water. Clayden and colleagues build their whole treatment around this idea: learn a handful of mechanistic patterns deeply, and the "reactions to memorize" collapse into a few principles [Clayden et al., 2012]. McMurry draws the same arc explicitly, moving from functional groups to the biomolecules they make up [McMurry, 2016].

A useful mental model: CHEM201 taught you how electrons move. CHEM202 teaches you where they want to go, and how life exploits that.

Throughout these notes, watch for three recurring questions. They are the same ones you asked about equilibrium in CHEM102:

  • Where is the electrophile, and where is the nucleophile? This is the orbital question: which HOMO meets which LUMO?
  • Is the reaction reversible, and if so, what drives it? This is the Le Chatelier question.
  • What is the leaving group, and how good is it? This is the pKa question.

1. The Carbonyl Group: Anatomy of an Electrophile

The C=O bond is polarized because oxygen (χ ≈ 3.4) is much more electronegative than carbon (χ ≈ 2.6). You can see the consequence in a resonance picture:

   R₂C=O   ⟷   R₂C⁺–O⁻
  (major)      (minor, but chemically decisive)

The orbital picture is more useful. The LUMO is the C=O π* orbital, and it has its larger lobe on carbon. A nucleophile does not approach carbon at 90° to the C=O axis. It comes in at roughly 107°, the Bürgi–Dunitz angle. That angle is a compromise: it maximizes overlap with π* while avoiding repulsion from the filled π orbital and the oxygen lone pairs [Clayden et al., 2012]. This is a recurring theme. Reactivity is geometry, and nucleophiles follow orbitals.

1a. Nucleophilic addition: the master reaction

Every aldehyde and ketone reaction starts the same way:

         Nu⁻                         O⁻               OH
          ↘                          |                |
   R₂C=O   ──────►    R₂C–Nu   ──(H⁺)──►  R₂C–Nu
  (sp², trigonal planar)  (sp³, tetrahedral alkoxide)

The carbon rehybridizes from sp² (about 120°) to sp³ (about 109.5°). That has two consequences you should internalize:

  • Sterics matter more than in SN2. Bulky groups crowd each other once the center becomes tetrahedral. This is why aldehydes are more reactive than ketones.
  • Electronics matter. Alkyl groups donate electron density by hyperconjugation and so stabilize the partial positive charge on the carbonyl carbon. Ketones, with two alkyl groups, are less electrophilic than aldehydes, which have one.

1b. Hydrates: a window onto carbonyl electrophilicity

Water adds reversibly to carbonyls to give gem-diols (hydrates). The equilibrium constant is one of the cleanest measures of electrophilicity:

R₂C=O  +  H₂O   ⇌   R₂C(OH)₂          K_hyd = [hydrate]/[carbonyl]

  Formaldehyde (H₂C=O)        K_hyd ≈ 2 × 10³      (>99.9% hydrate in water)
  Acetaldehyde                K_hyd ≈ 1            (~50:50)
  Acetone                     K_hyd ≈ 1.4 × 10⁻³   (~0.1% hydrate)
  Chloral (Cl₃C–CHO)          large                (isolable "chloral hydrate")
  Hexafluoroacetone           K_hyd ≈ 10⁶

That is a span of about nine orders of magnitude, governed entirely by substituents. Electron-withdrawing groups such as CCl3 and CF3 make the carbonyl hungrier for nucleophiles and push the equilibrium toward the hydrate. Recall from CHEM102 that ΔG° = −RT ln K. A factor of 10 in K corresponds to about 5.7 kJ/mol at 298 K, so substituent effects worth only a few tens of kJ/mol produce these enormous ratios.

1c. Hemiacetals and acetals: the reversible protecting group

Alcohols add to carbonyls the same way water does. One equivalent gives a hemiacetal, which is usually unstable. Under acid catalysis, a second alcohol displaces the OH to give an acetal:

                 ROH                    ROH, H⁺
R₂C=O    ⇌    R₂C(OH)(OR)    ⇌    R₂C(OR)₂   +  H₂O
              hemiacetal          acetal

Key step (acid-catalyzed):  protonate –OH → lose H₂O → oxocarbenium ion
                            R₂C=O⁺R  ⟷  R₂C⁺–OR   → captured by ROH

The oxocarbenium ion is the central intermediate. It is a carbocation stabilized by an adjacent oxygen lone pair, which connects directly to the SN1 chemistry of CHEM201. Three properties follow from this mechanism, and each matters biologically:

  1. Acetal formation requires acid. OH⁻ is a terrible leaving group, so the hydroxyl must first be converted to H2O.
  2. Acetals are stable to base and nucleophiles. No pathway gives a leaving group, because RO⁻ is too basic to leave from an sp³ carbon. This makes acetals excellent protecting groups for carbonyls during Grignard or hydride reactions elsewhere in a molecule.
  3. The reaction is fully reversible. Remove water (Dean–Stark trap, molecular sieves) to drive acetal formation. Add excess water with acid to hydrolyze the acetal back to the carbonyl. This is Le Chatelier's principle applied as a synthetic tool.

Forward pointer: a glycosidic bond is an acetal. Everything above explains the chemistry of starch, cellulose, and the sugar backbone of nucleic acids.

1d. Imines and enamines: nitrogen nucleophiles

Primary amines (RNH2) add to aldehydes and ketones. The intermediate (a carbinolamine) then loses water to give an imine, also called a Schiff base:

R₂C=O  +  R'NH₂   ⇌   R₂C(OH)–NHR'   ⇌   R₂C=NR'  +  H₂O
                       carbinolamine       imine (C=N)

The rate of imine formation peaks at about pH 4–5. This bell-shaped pH–rate profile is worth understanding, not memorizing:

  • Too acidic: the amine is protonated (R'NH3⁺) and is no longer a nucleophile.
  • Too basic: the carbinolamine –OH cannot be protonated, so it cannot leave as water.

The optimum is a compromise between two opposing requirements. This is the same logic as buffers in CHEM102, applied to a mechanism.

Secondary amines (R'2NH) cannot form a neutral C=N bond, because no N–H is left to lose. The iminium ion instead loses a proton from the α-carbon, giving an enamine (C=C–NR'2). Enamines are neutral, nucleophilic at carbon, and serve as "enolate equivalents" (Stork enamine chemistry).

Biological echo: imine (Schiff base) formation is everywhere in biochemistry. Examples include the attachment of retinal to the protein opsin in your eye, the binding of pyridoxal phosphate (vitamin B6) to amino acids, and class I aldolases, which use a lysine to form an enamine intermediate.


2. Carboxylic Acids and Their Derivatives: Nucleophilic Acyl Substitution

2a. Why carboxylic acids are acidic

Acetic acid has pKa ≈ 4.76. Ethanol has pKa ≈ 16. That is about 11 orders of magnitude in Ka. The difference lies in the conjugate base. Carboxylate delocalizes its negative charge equally over two oxygens, and both C–O bonds are the same length, about 1.26 Å. Ethoxide localizes its charge on one oxygen.

   R–C(=O)–O⁻   ⟷   R–C(–O⁻)=O          (two equivalent resonance forms)

Inductive tuning:
   CH₃COOH      pKa 4.76
   ClCH₂COOH    pKa 2.86
   Cl₂CHCOOH    pKa 1.29
   Cl₃CCOOH     pKa 0.65
   CF₃COOH      pKa ≈ 0.2–0.5   ← TFA, the workhorse acid of peptide chemistry

2b. Decarboxylation: a six-membered ring of electrons

Simple carboxylic acids do not lose CO2 easily. β-Keto acids and malonic acids do so readily on gentle heating, through a cyclic six-membered transition state:

     O     O–H                              OH
     ‖     |                                |
 R–C–CH₂–C=O    ──(Δ)──►   R–C=CH₂  + CO₂   ──►   R–C(=O)–CH₃
   (β-keto acid)          (enol)                 (ketone)

Here the second carbonyl acts as an electron sink, which makes the departure of CO2 possible. This is the final step of the malonic ester and acetoacetic ester syntheses. Biologically, related decarboxylations occur in the citric acid cycle and in fatty acid biosynthesis.

2c. The unifying mechanism: addition–elimination

All acyl derivatives R–C(=O)–Y react through a tetrahedral intermediate:

          Nu⁻                O⁻
           ↘                 |                     O
  R–C(=O)–Y   ──►   R–C–Y         ──►   R–C(=O)–Nu  +  Y⁻
                     |
                     Nu
               tetrahedral
               intermediate
   (addition)                     (elimination: C=O reforms, Y⁻ leaves)

Contrast this with aldehydes and ketones. When the carbonyl reforms, the intermediate expels the best leaving group available. For aldehydes and ketones, the only "leaving groups" are H⁻ or R⁻, which never leave. So aldehydes and ketones add, while acid derivatives substitute.

2d. The reactivity ladder, and why it exists

Most reactive                                                  Least reactive
Acyl chloride  >  Anhydride  >  Thioester > Ester ≈ Acid  >  Amide   (> Carboxylate)
  RCOCl            (RCO)₂O       RCOSR'     RCOOR'            RCONR'₂

pKa of conjugate acid of leaving group (Y–H):
  HCl ≈ –7        RCOOH ≈ 4.8   RSH ≈ 10   R'OH ≈ 16          NH₃ ≈ 38

Two effects operate together:

  1. Ground-state stabilization by resonance. The lone pair on Y donates into the C=O π*, which makes the carbonyl less electrophilic. Nitrogen is the best donor among these atoms (least electronegative, lone pair highest in energy). Chlorine is the worst, because its 3p orbital overlaps poorly with carbon's 2p.
  2. Leaving-group ability. Weak bases are good leaving groups. Cl⁻ is very weak as a base. ⁻NR2 is extremely strong.

The practical rule: you can always go downhill on this ladder, never directly uphill. An acyl chloride plus an alcohol gives an ester. An ester plus an amine gives an amide. Converting an amide back to an acyl chloride directly is not feasible. You must first hydrolyze to the acid and then activate it, for example with SOCl2.

Infrared spectroscopy confirms the ladder. The C=O stretch reports how much double-bond character the carbonyl retains:

Acyl chloride  ~1800 cm⁻¹   (least resonance donation; strongest C=O)
Anhydride      ~1820 and ~1760 cm⁻¹ (two coupled stretches)
Ester          ~1735–1750 cm⁻¹
Ketone         ~1715 cm⁻¹
Amide          ~1650–1690 cm⁻¹   (most donation; C=O weakened — "Amide I" band)

2e. The amide bond: the most important bond in biology

Nitrogen lone-pair donation into the carbonyl gives the C–N bond partial double-bond character:

     O                 O⁻
     ‖                 |
  R–C–N–R'   ⟷    R–C=N⁺–R'
       |                |
       H                H

Measured C–N bond length in amides  ≈ 1.32–1.33 Å
Typical C–N single bond             ≈ 1.47 Å
Typical C=N double bond             ≈ 1.27 Å
Rotational barrier about C–N        ≈ 65–85 kJ/mol (enough to see separate NMR
                                      signals for the two N-methyls of DMF at room temperature)

This produces three consequences that shape all of structural biology:

  • Planarity. Six atoms lie in one plane: Cα, C, O, N, H, and the next Cα.
  • Low reactivity. Uncatalyzed hydrolysis of a peptide bond at neutral pH and room temperature takes years. Your proteins are kinetically stable in water but thermodynamically unstable with respect to hydrolysis. Proteases exist to overcome this kinetic barrier.
  • Very weak basicity. Amides are not basic like amines. Their conjugate acids have pKa ≈ 0 or below, and when amides are protonated, it happens on oxygen, not nitrogen. Protonating N would destroy the resonance.

2f. Nitriles: acid derivatives in disguise

Nitriles (R–C≡N) sit at the oxidation state of carboxylic acids. Under acidic or basic conditions they hydrolyze first to amides and then to acids. They can be made by SN2 of cyanide on alkyl halides, which is a classic way to add one carbon.


3. Enols and Enolates: The Carbonyl as a Nucleophile

This is the conceptual pivot of the course. The same carbonyl that is attacked at carbon can, through its α-carbon, attack other electrophiles.

3a. Keto–enol tautomerism

      O                     OH
      ‖                     |
  R–C–CH₃     ⇌      R–C=CH₂           K_enol (acetone) ≈ 10⁻⁸
   keto form          enol form

Tautomers are constitutional isomers that interconvert by moving a proton and a π bond. They are not resonance structures. For simple ketones the keto form dominates heavily, because C=O plus C–H is stronger than C=C plus O–H. The exceptions are informative:

  • 1,3-Dicarbonyls such as acetylacetone are substantially enolized, often the major form in nonpolar solvents. Conjugation and an intramolecular O–H···O hydrogen bond stabilize the enol.
  • Phenol exists essentially entirely as the enol. The "keto" form (a cyclohexadienone) would sacrifice aromaticity. Here aromaticity outweighs bond-energy bookkeeping.

3b. α-Acidity: why a C–H can be acidic

Compound                         pKa of α-H     Why
Alkane C–H                         ~50          no stabilization
Ethyl acetate (CH₃COOEt)           ~25          ester O donates, weakening enolate stabilization
Acetone (CH₃COCH₃)                 ~19–20       enolate charge on O
Malonate diester                   ~13          two carbonyls share the charge
Acetylacetone                      ~9           two ketones share the charge

The enolate is an ambident nucleophile. Most of its charge density sits on oxygen, but its HOMO has a large coefficient on carbon, so it typically reacts at carbon with carbon electrophiles. This is HOMO–LUMO reasoning at work, not simply "go where the charge is."

Choosing a base is equilibrium thinking from CHEM102. If the base's conjugate acid has a higher pKa than the carbonyl, deprotonation is essentially complete:

  • LDA (lithium diisopropylamide; diisopropylamine pKa ≈ 36) deprotonates ketones quantitatively and irreversibly. At −78 °C it forms the kinetic enolate by removing the less hindered proton.
  • Alkoxides (EtO⁻; EtOH pKa ≈ 16) produce only a small equilibrium amount of a simple ketone enolate. Under reversible conditions the more substituted, thermodynamic enolate accumulates.

3c. α-Halogenation

  • Acid-catalyzed halogenation goes through the enol. It usually stops after one halogen, because the electron-withdrawing halogen makes further enol formation slower.
  • Base-promoted halogenation goes through the enolate. It accelerates with each halogen added, because each one makes the remaining α-H more acidic. Methyl ketones go all the way to CX3 and then cleave: this is the haloform reaction.

The opposite selectivity of the two conditions comes from asking how the substituent affects the rate-determining intermediate.

3d. The aldol reaction: a carbonyl attacking itself

2 CH₃CHO   ──(NaOH)──►   CH₃CH(OH)CH₂CHO   ──(Δ, –H₂O)──►   CH₃CH=CHCHO
                         β-hydroxy aldehyde                  α,β-unsaturated
                         ("aldol" = ald + ol)                aldehyde (condensation)

Mechanism:
 1. Base removes α-H → enolate (nucleophile)
 2. Enolate C attacks C=O of second molecule (electrophile)
 3. Protonation → β-hydroxy carbonyl
 4. (Optional) E1cB dehydration → conjugated enone

One molecule is the nucleophile and an identical molecule is the electrophile. This is the beauty of the carbonyl's dual nature. The aldol reaction forms a new C–C bond and is reversible (the retro-aldol). Crossed aldols are messy unless one partner cannot enolize (for example, benzaldehyde) or you pre-form one enolate with LDA. In biology, aldolase builds and breaks sugars by exactly this chemistry in glycolysis and gluconeogenesis.

3e. The Claisen condensation: aldol logic for esters

2 CH₃COOEt   ──(1. NaOEt;  2. H₃O⁺)──►   CH₃COCH₂COOEt  +  EtOH
                                          ethyl acetoacetate (β-keto ester)

An ester enolate attacks another ester. The tetrahedral intermediate then expels ethoxide, because esters substitute rather than add (Section 2c). There is a subtle point here. The equilibrium for C–C bond formation is actually unfavorable. The reaction is driven by the final, essentially irreversible deprotonation of the β-keto ester product (pKa ≈ 11) by ethoxide (EtOH pKa ≈ 16). For that reason you need a full equivalent of base, and the ester must have two α-hydrogens. This is a lovely example of a thermodynamic "sink" pulling an uphill reaction forward, the same coupling logic as ATP hydrolysis in BIOL101.

Nature's version runs with thioesters (acetyl-CoA), which are more activated than oxygen esters, as the ladder in Section 2d predicts. This is how fatty acids and polyketides are built.

3f. The Michael addition: conjugate (1,4-) addition

An α,β-unsaturated carbonyl has two electrophilic sites: the carbonyl carbon and the β-carbon. Resonance shows why:

   C=C–C=O   ⟷   ⁺C–C=C–O⁻          (β-carbon is electrophilic)

Michael:   Nu⁻ (stabilized, soft — e.g., malonate enolate, enamine, thiolate, cuprate)
           adds to β-carbon → enolate → protonation → 1,5-dicarbonyl (when Nu is an enolate)

"Soft," stabilized nucleophiles prefer 1,4-addition. "Hard," reactive ones such as RLi and Grignards tend toward 1,2-addition. A Michael addition followed by an intramolecular aldol is the Robinson annulation, which builds six-membered rings and is classic in steroid synthesis. In biology, cysteine thiols add in Michael fashion to many electrophilic drugs and natural products.


4. Aromaticity: When a π System Becomes Special

4a. The thermochemical evidence

Cyclohexene + H₂ → cyclohexane                   ΔH ≈ –120 kJ/mol
"Cyclohexatriene" (predicted, 3 × –120)          ΔH ≈ –360 kJ/mol
Benzene + 3 H₂ → cyclohexane (measured)          ΔH ≈ –208 kJ/mol

Aromatic stabilization ("resonance energy")  ≈ 150 kJ/mol  (~36 kcal/mol)

That is about 150 kJ/mol of extra stability, comparable to a substantial fraction of a C–C bond. Benzene is not three alternating double bonds. X-ray structures show six identical C–C bonds of about 1.39 Å, between the typical single (1.54 Å) and double (1.34 Å) lengths.

4b. Hückel's rule and the molecular-orbital explanation

A molecule is aromatic if it meets four conditions:

  1. It is cyclic.
  2. It is planar, or nearly so.
  3. It is fully conjugated, with a p orbital on every ring atom.
  4. It contains 4n + 2 π electrons (n = 0, 1, 2, …), giving 2, 6, 10, 14, and so on.

If the first three conditions hold but the ring has 4n π electrons, it is antiaromatic and destabilized. Cyclobutadiene is the classic example. Molecules such as cyclooctatetraene avoid antiaromaticity by buckling out of planarity, which makes them simply nonaromatic.

Why 4n + 2? This is where it becomes beautiful. Combine six p orbitals and you get six π MOs. A simple mnemonic, the Frost circle, predicts their energies. Inscribe the polygon vertex-down in a circle, and each vertex marks an MO energy level:

Benzene (6 p orbitals):

        ψ₆*                    — antibonding (1 MO)
    ψ₄*     ψ₅*                — antibonding (degenerate pair)
  ------------------ nonbonding level --------
    ψ₂      ψ₃                 — bonding (degenerate pair)   ↑↓  ↑↓
        ψ₁                     — bonding (1 MO, no nodes)        ↑↓

6 π electrons fill all bonding MOs exactly → closed shell → "aromatic"

Above the lowest MO, bonding orbitals come in degenerate pairs. A closed shell needs 2 electrons for the lowest MO plus 4 for each filled pair: 2 + 4n. With 4n electrons, the last two electrons are left unpaired in a degenerate pair. For cyclobutadiene they fall into nonbonding orbitals, giving a diradical-like, destabilized system. The same counting reappears in atomic physics: closed shells are special.

4c. Ions and heterocycles: apply the rule, don't memorize

Cyclopentadiene  pKa ≈ 16  (an unusually acidic hydrocarbon!)
   because its conjugate base, cyclopentadienyl anion, has 6 π e⁻ → aromatic
Cycloheptatrienyl (tropylium) cation, C₇H₇⁺: 6 π e⁻ → aromatic, stable carbocation

Pyridine:  N lone pair in sp² orbital IN THE RING PLANE, not part of π system
           → lone pair available → basic (pKa of pyridinium ≈ 5.2)
Pyrrole:   N lone pair IS part of the 6-π aromatic sextet
           → protonating N would destroy aromaticity → very weakly basic
             (conjugate acid pKa ≈ –4; protonation actually occurs on carbon)

The pyridine/pyrrole contrast is one of the most useful in the course. It explains histidine's imidazole ring, which has one "pyridine-like" N that is basic (pKa ≈ 6) and one "pyrrole-like" N that is not. Because histidine's pKa sits near physiological pH, it is the go-to proton shuttle in enzyme active sites. The same counting also explains why the DNA bases (purines and pyrimidines) are flat, aromatic, and able to stack.


5. Electrophilic Aromatic Substitution (EAS)

5a. The general mechanism

                E⁺                 H  E                             E
               ↗                    \/
   Benzene  ────────►   [arenium ion / σ-complex / Wheland intermediate]  ──(–H⁺)──►  Ar–E
            (slow, rate-determining:          (fast: base removes H⁺,
             aromaticity lost)                 aromaticity restored)

The arenium ion's + charge is delocalized ortho and para to the new sp³ carbon.

The key contrast is between aromatic rings and alkenes. An alkene reacting with Br2 adds. Benzene treated with Br2/FeBr3 substitutes. After the electrophile attacks, the cation can either capture a nucleophile (addition, which would leave the product non-aromatic) or lose a proton (substitution, which restores the roughly 150 kJ/mol of aromatic stabilization). Substitution wins decisively.

5b. The five classic reactions: generate a strong electrophile

Reaction              Reagents                  Electrophile E⁺
Halogenation          Br₂ / FeBr₃ (or Cl₂/AlCl₃)  "Br⁺" (Br–Br–FeBr₃ complex)
Nitration             HNO₃ / H₂SO₄              NO₂⁺ (nitronium ion)
Sulfonation           SO₃ / H₂SO₄ (fuming)      SO₃ or HSO₃⁺  (REVERSIBLE)
F–C alkylation        R–Cl / AlCl₃              R⁺ (carbocation or complex)
F–C acylation         RCOCl / AlCl₃             RC≡O⁺ (acylium ion)

Friedel–Crafts limitations:

  • Alkylation suffers from carbocation rearrangements (CHEM201 hydride shifts). 1-Chloropropane gives mainly isopropylbenzene.
  • Alkylation leads to polyalkylation. The alkyl product is more activated than the starting material.
  • Acylation avoids both problems. The acylium ion is resonance-stabilized and does not rearrange, and the acyl product is deactivated, so the reaction stops after one substitution. Reducing the ketone afterward (Clemmensen or Wolff–Kishner) gives a clean straight-chain alkylbenzene.
  • Both fail on strongly deactivated rings (for example, nitrobenzene) and on anilines, where the basic NH2 complexes the Lewis acid.

5c. Directing effects: reasoning from the arenium ion

Do not memorize the table below. Derive it each time by drawing the three arenium ions (ortho, meta, para attack) and asking which resonance forms place positive charge on the carbon bearing the substituent.

                         Effect on rate     Directs to     Reason
–NH₂, –NHR, –OH, –OR     strongly activating  o, p     lone pair donates into ring (π-donation)
–NHCOR, –OCOR            moderately activating o, p    lone pair partly tied up by C=O
–R (alkyl), –Ar          weakly activating   o, p      hyperconjugation / induction
–F, –Cl, –Br, –I         weakly DEACTIVATING o, p      inductive withdrawal (rate) but
                                                        lone-pair donation (orientation)
–CHO, –COR, –COOR, –COOH deactivating        meta      π-withdrawing
–CN, –SO₃H, –CF₃         strongly deactivating meta    strong withdrawal
–NO₂, –NR₃⁺              strongly deactivating meta    strong withdrawal / full + charge

The logic:

  • For ortho or para attack, one resonance form of the arenium ion puts the positive charge directly on the ipso carbon bearing the substituent.
    • If the substituent has a lone pair (–OCH3), it can donate into that cation, giving an extra resonance form in which every atom has an octet. That stabilizes the intermediate, so the substituent is an o,p-director and an activator.
    • If the substituent is electron-withdrawing (–NO2), placing positive charge next to it is disastrous. Ortho and para attack are strongly disfavored, and meta "wins" by being least bad. Meta-directors do not activate the meta position; they deactivate ortho and para even more.
  • Halogens are the instructive anomaly. They are strongly σ-withdrawing, which slows the reaction (deactivating). Their lone pairs can still donate by resonance to stabilize the ortho/para arenium ions, which sets the orientation (o,p). Rate and regiochemistry are controlled by different effects.

6. Nucleophilic Aromatic Substitution: Reversing the Polarity

Aromatic rings are electron-rich, so attack by a nucleophile seems unlikely, and SN2 at an sp² carbon is geometrically impossible because backside attack would pass through the ring. Two special mechanisms work anyway.

6a. SNAr: addition–elimination through a Meisenheimer complex

       F                                  F  Nu                       Nu
       |                                   \/
   [ring]–NO₂ (o/p)   + Nu⁻  ──(slow)──►  [Meisenheimer complex]  ──(fast)──►  [ring]–NO₂  + F⁻
                                          (anion delocalized onto
                                           NO₂ oxygens at o/p)

This is the mirror image of EAS. EAS goes through a cationic intermediate stabilized by donors. SNAr goes through an anionic intermediate stabilized by withdrawing groups (NO2, CN, C=O) ortho or para to the leaving group.

A counterintuitive result: fluoride is the best leaving group in SNAr. The usual SN2 order is I > Br > Cl >> F. In SNAr the order is roughly reversed: F >> Cl ≈ Br > I. The rate-determining step is addition, not C–X cleavage. Fluorine's electronegativity makes the ipso carbon most electrophilic and stabilizes the anionic intermediate. Breaking the strong C–F bond happens in the fast second step and so barely affects the rate. This is a perfect example of why you must know which step is rate-determining before reasoning about rates (CHEM102 kinetics).

6b. Benzyne: elimination–addition

Chlorobenzene with NaNH2 in liquid ammonia gives aniline, but there are no activating groups. Isotope labeling (14C at the ipso carbon) showed that the NH2 ends up roughly half on the labeled carbon and half on the adjacent carbon. That result implicates a symmetrical intermediate, benzyne. The strong base removes the ortho H, Cl⁻ leaves, and the result is a strained "triple bond" made from poorly overlapping sp² orbitals in the ring plane. The amide nucleophile can then add to either end. Benzyne is highly reactive and is also a powerful dienophile in Diels–Alder reactions.


7. Amines: Nitrogen as Base and Nucleophile

7a. Basicity: always ask "where is the lone pair, and is it busy?"

Modern practice quotes the pKa of the conjugate acid (pKaH). Remember that pKb = 14.00 − pKaH at 25 °C.

Base                     pKaH     pKb      Lone pair situation
NH₃                      9.25     4.75     sp³, localized
CH₃NH₂ (alkylamines)    ~10.6    ~3.4     alkyl donation stabilizes R–NH₃⁺
Pyrrolidine             ~11.3    ~2.7     cyclic sec-amine, very available
Pyridine                 5.2      8.8      sp² (more s-character holds e⁻ tighter)
Aniline (PhNH₂)          4.6      9.4      delocalized into ring
Acetamide              ~ –0.5     —        delocalized into C=O (protonates on O)
Pyrrole                ~ –4       —        part of aromatic sextet

Three factors cover nearly everything:

  1. Hybridization. sp³ > sp² > sp. More s-character holds the lone pair closer to the nucleus, so it is less available.
  2. Delocalization. Resonance into a ring or carbonyl ties up the lone pair.
  3. Solvation and sterics. In water, tertiary amines are often slightly less basic than secondary amines, because their bulky conjugate acids are solvated poorly.

7b. Preparation

  • Direct alkylation of NH3 with RX is a mess. Each alkylation makes the nitrogen more nucleophilic, giving mixtures of 1°, 2°, 3°, and quaternary products.
  • Gabriel synthesis gives clean primary amines. Phthalimide anion is alkylated once, because the product N has no H, and the amine is then released with hydrazine.
  • Reductive amination forms an imine from a carbonyl and amine and reduces it in situ (NaBH3CN). It ties Sections 1 and 7 together and mirrors biological transamination.
  • Reduction of amides, nitriles, nitro groups, and azides also gives amines. Nitroarene reduction is the standard route to anilines after EAS nitration.

7c. Quaternary ammonium salts and the Hofmann elimination

Exhaustive methylation gives R–NMe3⁺. With Ag2O and heat, E2 elimination occurs and gives the less substituted (Hofmann) alkene, the opposite of Zaitsev. The bulky trimethylammonium leaving group and the more acidic, less hindered β-hydrogens favor the terminal alkene. Biologically, choline and the phospholipid head group phosphatidylcholine are quaternary ammonium ions.


8. Spectroscopy: Reading Structure from Physics

Structure determination is detective work. Each technique answers a different question, and the skill lies in integrating them. This builds on PHYS201: molecules absorb energy at frequencies set by their vibrational, nuclear-spin, or electronic transitions.

8a. Mass spectrometry: "How heavy, and what pieces?"

  • The molecular ion (M⁺•) gives the molecular mass. High-resolution MS gives the exact formula.
  • Nitrogen rule: an odd nominal mass means an odd number of N atoms.
  • Isotope patterns: Cl gives M : M+2 ≈ 3 : 1. Br gives M : M+2 ≈ 1 : 1.
  • Characteristic fragmentations include α-cleavage next to C=O (giving acylium ions) and the McLafferty rearrangement (a γ-H transferred through a six-membered transition state, carbonyls with a γ-hydrogen).
  • Degree of unsaturation:
DoU = (2C + 2 + N – H – X) / 2        (each ring or π bond = 1; benzene ring = 4)

8b. IR: "Which functional groups?"

O–H (alcohol)          3200–3550 cm⁻¹, broad
O–H (carboxylic acid)  2500–3300 cm⁻¹, very broad (H-bonded dimers)
N–H                    3300–3500 cm⁻¹ (1° amine: two bands; 2°: one)
C≡N                    ~2250 cm⁻¹
C=O                    1650–1820 cm⁻¹ (see ladder in §2d; conjugation lowers ~20–30 cm⁻¹)
Aldehyde C–H           ~2720 and ~2820 cm⁻¹ (Fermi doublet)
Aromatic C=C           ~1600 and ~1500 cm⁻¹

8c. 1H NMR: "What is the H-framework, and who neighbors whom?"

NMR gives four kinds of information:

  1. Number of signals: the number of distinct H environments.
  2. Chemical shift (δ): the electronic environment.
  3. Integration: the relative number of H in each environment.
  4. Splitting (n + 1 rule): the number of neighboring H.
Alkyl C–H              0.9–1.8 ppm
H–C–C=O (α to C=O)     2.0–2.7 ppm
H–C–O, H–C–N           3.3–4.5 ppm
Vinyl                  4.5–6.5 ppm
Aromatic               6.5–8.5 ppm   ← RING CURRENT deshielding
Aldehyde CHO           9–10 ppm
Carboxylic acid COOH   10–13 ppm (broad, exchanges with D₂O)

An observable signature of aromaticity: in a magnetic field, the delocalized π electrons circulate as a ring current. The induced field reinforces the applied field outside the ring, deshielding aromatic protons, and opposes it inside the ring. In [18]annulene the inner protons appear upfield of TMS (negative δ), while the outer ones appear near 9 ppm. Aromaticity, which began as a thermochemical idea, shows up directly in NMR.

8d. 13C NMR: "What is the carbon skeleton?"

sp³ C              0–90 ppm  (C–O ~50–90)
Alkene/aromatic C  100–160 ppm
Nitrile C          ~115–125 ppm
Acid-derivative C=O  160–185 ppm (ester, amide, acid)
Aldehyde/ketone C=O  190–220 ppm

The roughly 30 ppm difference between ketone and ester/amide carbonyls is another reflection of resonance donation (Section 2d). Donation from O or N shields the carbonyl carbon.


9. Biomolecules I: Amino Acids

9a. Structure and stereochemistry

The 20 standard amino acids are α-amino acids, H2N–CHR–COOH. All except glycine (R = H) are chiral at Cα, and proteins use the L-configuration (Fischer projection: NH2 on the left with COOH at top). Most L-amino acids are (S) by the CIP rules, but L-cysteine is (R). The side-chain CH2SH outranks COOH because sulfur's atomic number (16) beats oxygen's (8) at the first point of difference. This is a reminder from CHEM201 that D/L and R/S are different systems; one does not translate directly into the other. Isoleucine and threonine each have a second stereocenter in the side chain.

9b. Ionization, zwitterions, and the isoelectric point

        pKa₁ ≈ 2.3              pKa₂ ≈ 9.6
H₃N⁺–CHR–COOH   ⇌   H₃N⁺–CHR–COO⁻   ⇌   H₂N–CHR–COO⁻
 (net +1, low pH)    (zwitterion, net 0)     (net –1, high pH)

Isoelectric point (non-ionizable side chain):
   pI = (pKa₁ + pKa₂) / 2

Glycine:  pI = (2.34 + 9.60)/2 ≈ 5.97

For ionizable side chains, average the two pKa values that flank the neutral species:
   Aspartate:  pI ≈ (pKa α-COOH + pKa side-chain COOH)/2 ≈ (1.9 + 3.7)/2 ≈ 2.8
   Lysine:     pI ≈ (pKa α-NH₃⁺ + pKa side-chain NH₃⁺)/2 ≈ (9.0 + 10.5)/2 ≈ 9.7

Why does the α-COOH (pKa ≈ 2.3) behave as a much stronger acid than acetic acid (4.76)? The adjacent –NH3⁺ withdraws electron density inductively and stabilizes the carboxylate electrostatically. This is the same substituent logic as the chloroacetic acid series in Section 2a. Amino acids are crystalline, high-melting, water-soluble solids because in the solid state they are internal salts. Glycine decomposes above about 230 °C instead of melting like a small organic molecule.

The Henderson–Hasselbalch equation from CHEM102 governs everything here:

pH = pKa + log([A⁻]/[HA])

10. Biomolecules II: Peptides and Proteins

10a. Peptide bond geometry: Pauling's insight

Peptides are written from the N-terminus (free H3N⁺) on the left to the C-terminus (free COO⁻) on the right. Because the amide C–N bond cannot rotate freely (Section 2e), the backbone's conformational freedom comes down to two torsion angles per residue: φ (about N–Cα) and ψ (about Cα–C). Most peptide bonds are trans, which avoids clashes between successive Cα substituents. X–Pro bonds are the important exception, because proline's ring makes cis and trans closer in energy.

In 1951, Pauling, Corey, and Branson used this constraint as the foundation for predicting protein secondary structure. Using bond lengths and angles from careful crystal structures of amino acids and small peptides, they insisted on three rules:

  • The amide unit is planar.
  • Every backbone N–H and C=O should take part in a near-linear hydrogen bond.
  • There is no requirement for an integral number of residues per turn.

That last point was a crucial break from earlier models. From these rules they derived helical structures, one of which, the α-helix, proved to be a dominant motif in real proteins [Pauling, Corey & Branson, 1951].

α-helix (as now established from protein structures):
   ~3.6 residues per turn
   rise ≈ 1.5 Å per residue;  pitch ≈ 5.4 Å per turn
   H-bond:  C=O of residue i  ···  H–N of residue i+4
   side chains point outward from the helix axis

Pauling and colleagues' original paper described two hydrogen-bonded helices, with roughly 3.7 and 5.1 residues per turn. The first corresponds to the α-helix, whose parameters were refined once real protein structures were solved [Pauling, Corey & Branson, 1951]. The scientific lesson is profound. A small-molecule fact, amide planarity from resonance, predicted macromolecular architecture before any protein crystal structure was known. Organic chemistry dictated biology.

10b. Sequencing: organic reactions as analytical tools

  • Sanger's reagent (1-fluoro-2,4-dinitrobenzene) labels the N-terminal amine by SNAr. Note the fluoride leaving group and the two o/p nitro groups, exactly as Section 6a predicts. After total acid hydrolysis, the yellow DNP-amino acid identifies the N-terminal residue.
  • Edman degradation (phenyl isothiocyanate) removes one N-terminal residue at a time. The released residue cyclizes and is identified as a phenylthiohydantoin (PTH) derivative, and the rest of the chain is left intact for the next cycle.
  • Enzymatic cleavage breaks chains at specific sites. Trypsin cuts after Lys and Arg; chymotrypsin cuts after aromatic residues. Overlapping fragments then reassemble the sequence.
  • Modern sequencing relies heavily on tandem mass spectrometry, which reads fragment ladders along the backbone. Section 8a in action.

11. Biomolecules III: Carbohydrates

11a. Sugars are intramolecular hemiacetals

Glucose is a polyhydroxy aldehyde. A molecule with an aldehyde and an alcohol five carbons away is perfectly set up for intramolecular hemiacetal formation (Section 1c). A six-membered ring forms almost strain-free, so the equilibrium heavily favors the cyclic form.

Open-chain D-glucose (C1 aldehyde, C5–OH)
        │  C5–OH attacks C1=O  (intramolecular nucleophilic addition)
        ▼
D-glucopyranose  (six-membered ring hemiacetal; C1 becomes a new stereocenter)

C1 = the ANOMERIC carbon.  Two anomers:
   α-D-glucopyranose : anomeric OH trans to C6 CH₂OH (axial in chair)    ~36%
   β-D-glucopyranose : anomeric OH cis to C6 CH₂OH (equatorial in chair) ~64%
                                                    (equilibrium in water)

Mutarotation is the change in optical rotation as pure α- or β-glucose dissolved in water equilibrates to this mixture. It happens through the open-chain form, which is direct evidence that the hemiacetal reversibly opens.

Representations are three views of the same molecule:

  • Fischer projections show configuration. D/L is assigned from the stereocenter farthest from the carbonyl (C5 in glucose): OH on the right means D.
  • Haworth projections show the ring as flat and are convenient for seeing cis/trans relationships.
  • Chair conformations show the real three-dimensional shape and the energetics.

β-D-Glucopyranose is the only D-aldohexose in which every substituent can be equatorial in a chair. This is CHEM201's A-value analysis, and it may help explain why glucose is the most abundant monosaccharide in nature.

A counterintuitive detail, the anomeric effect. Sterics alone would predict much more than 64% β. Electronegative substituents at the anomeric carbon partly prefer the axial position, because a ring-oxygen lone pair can donate into the antiperiplanar C1–O σ* orbital (one common explanation). This raises the α population in glucose and makes axial anomers dominant in some other sugar derivatives. Simple steric rules are not the whole story.

11b. Glycosidic bonds are acetals

A hemiacetal plus an alcohol under acid gives an acetal, a glycoside. Because the bond is an acetal (Section 1c):

  • It is stable to base. Cellulose survives alkaline treatment.
  • It is hydrolyzed by acid, through an oxocarbenium-like transition state. Glycosidase enzymes exploit this mechanism.
  • It cannot mutarotate. A glycoside is locked as α or β.
  • Reducing sugars have a free hemiacetal, which can open to an aldehyde and reduce Tollens' or Benedict's reagent. Sucrose has both anomeric carbons tied up in the glycosidic bond, so it is non-reducing.

11c. Polysaccharides: one stereocenter decides your diet

Amylose (starch):  α(1→4)-linked glucose   → helical, digestible by humans
Amylopectin/glycogen:  α(1→4) chains with α(1→6) branches (glycogen more highly branched)
Cellulose:         β(1→4)-linked glucose   → straight, H-bonded sheets → fibers;
                                              not digestible by human enzymes
Chitin:            β(1→4)-linked N-acetylglucosamine (an amide!)

Starch and cellulose are both made of glucose. The only difference is the configuration at the anomeric carbon of each linkage. That one stereochemical choice separates a potato from a tree trunk, and food from fiber.


12. Biomolecules IV: Lipids

Lipids are defined by solubility (hydrophobic) rather than by a single functional group. Their chemistry is still carbonyl chemistry.

  • Fatty acids: long-chain carboxylic acids, usually with an even number of carbons (C12–C20), because they are built two carbons at a time from acetyl-CoA by Claisen-type condensations (Section 3e).
    • Nomenclature: C18:1 cis-Δ9 is oleic acid, an ω-9 fatty acid. Δ counts from the carboxyl end; ω counts from the methyl end.
    • Natural unsaturated fatty acids are usually cis. The cis double bond kinks the chain, disrupts packing, and lowers the melting point, which is why oils are liquid and butter is solid.
  • Triacylglycerols are glycerol triesters. Base hydrolysis (saponification, nucleophilic acyl substitution) gives soap, sodium carboxylates whose amphiphilic structure forms micelles.
  • Glycerophospholipids: glycerol bearing two fatty esters and a phosphodiester-linked polar head group (choline, ethanolamine, serine). They are amphiphilic and form the membrane bilayer you studied in BIOL101.
  • Sphingolipids: built on sphingosine, with the fatty acid attached by an amide rather than an ester. Sphingomyelin is abundant in myelin sheaths.
  • Waxes: esters of long-chain acids and long-chain alcohols. They are extremely hydrophobic protective coatings.
  • Steroids: a fused four-ring system (three six-membered rings and one five-membered ring), with trans ring fusions giving a rigid, flat-ish skeleton. Cholesterol tunes membrane fluidity. Steroid hormones such as testosterone and estradiol differ by small functional-group changes. Estradiol's A-ring is aromatic (a phenol), which is what lets it bind its receptor.

13. Biomolecules V: Nucleotides and Nucleic Acids

This section brings together nearly everything in the course.

  • The bases are aromatic heterocycles.
    • Purines (adenine, guanine) have a fused bicyclic ring system. Pyrimidines (cytosine, thymine, uracil) have one ring.
    • Planarity and aromaticity let them stack in the helix, through π-stacking and the hydrophobic effect.
    • Their pyridine-like and pyrrole-like nitrogens, together with C=O and NH2 groups, form the specific hydrogen-bonding faces of Watson–Crick pairing (BIOL102): A–T has 2 H-bonds and G–C has 3.
    • G, T, U, and C are drawn in their lactam (amide-like, keto) tautomers. Rare enol or imino tautomers would mispair, which is one proposed source of mutation. Keto–enol tautomerism (Section 3a) reaches into genetics.
  • Nucleosides: the base is attached to C1′ of ribose (RNA) or 2′-deoxyribose (DNA) by a β-N-glycosidic bond. This is formally the nitrogen analog of an acetal, which explains why purine nucleosides can lose their base under acidic conditions (depurination).
  • Nucleotides: nucleoside phosphates, such as AMP and ATP.
  • The backbone: 3′→5′ phosphodiester linkages. The negative charge on each phosphodiester (pKa ≈ 1) repels hydroxide and other nucleophiles, which makes DNA remarkably resistant to hydrolysis. That is a fitting property for a genetic archive.

Why is RNA less stable than DNA? RNA's 2′-OH sits right next to the 3′-phosphodiester. Under basic conditions it acts as an intramolecular nucleophile, attacking phosphorus, forming a 2′,3′-cyclic phosphate, and cleaving the chain. DNA lacks the 2′-OH and so lacks this pathway. One missing oxygen atom, through a neighboring-group effect, helps explain why DNA serves as the long-term information store and RNA as the short-lived working copy.


14. Connections to Peptide Chemistry

Peptide synthesis is where nearly every concept in this course meets a real problem. Making a dipeptide sounds trivial: an amine plus a carboxylic acid gives an amide. In practice, the problem is surprisingly difficult.

14a. The problem, stated in CHEM202 language

  1. Acid + amine gives a salt, not an amide. Proton transfer (pKa 4.8 vs. 10.6) is far faster than acyl substitution, and carboxylate is at the bottom of the reactivity ladder. The acid must be activated by converting its OH into a good leaving group.
  2. Selectivity. Mixing Ala and Gly with an activator gives Ala-Ala, Ala-Gly, Gly-Ala, Gly-Gly, and longer oligomers. Every amine except the one you want must be protected, and every carboxylic acid except the one you want must be blocked.
  3. Stereochemical integrity. Activating an N-acyl amino acid makes its α-H more acidic. This can lead to an oxazolone (azlactone), a cyclic intermediate whose α-carbon readily enolizes. Enolization destroys the stereocenter (Section 3) and leads to racemization (epimerization at that residue). Urethane-type protecting groups (Cbz, Boc, Fmoc) greatly suppress oxazolone formation. That is one key reason they dominate the field.
  4. Yield compounding. This is a MATH201 problem. If each coupling-plus-deprotection cycle proceeds in fraction p yield, the overall yield of an n-step synthesis is:
Overall yield = pⁿ

  p = 0.99, n = 100 steps  →  0.99¹⁰⁰ ≈ 0.37   (37%)
  p = 0.95, n = 100 steps  →  0.95¹⁰⁰ ≈ 0.006  (0.6%)

A synthesis like this demands near-quantitative steps, and with classical solution-phase methods, purifying after every step is crippling.

14b. Merrifield's solution: put the chain on a bead

R. Bruce Merrifield's insight was to anchor the C-terminal amino acid to an insoluble polymer, a chloromethylated, lightly cross-linked polystyrene–divinylbenzene resin. The growing chain then stays attached throughout. Excess reagents can be used to push each step to completion and simply washed away by filtration, so no crystallization or chromatography is needed between steps [Merrifield, 1963]. In the 1963 paper he demonstrated the approach on a tetrapeptide, L-Leu-L-Ala-Gly-L-Val:

  • The first amino acid was attached as a benzyl-type ester, formed by SN2 displacement of the resin's benzylic chloride by a carboxylate (CHEM201 chemistry).
  • Couplings used dicyclohexylcarbodiimide (DCC).
  • N-α protection was the carbobenzoxy (Cbz) group, removed with HBr in acetic acid.
  • The finished peptide was cleaved from the resin with HBr in trifluoroacetic acid.

The approach was soon reworked around the Boc group and then automated. Merrifield received the 1984 Nobel Prize in Chemistry for this work.

SPPS cycle (chain grows C → N, opposite to ribosomal direction... 
            though both ADD residues so the chain extends toward the N-terminus? NO:
            the ribosome extends the chain at the C-terminus (N → C);
            SPPS extends it at the N-terminus (C → N).)

 Resin–O–C(=O)–CHR₁–NH–PG
     │ 1. Deprotect N-α (remove PG)
     ▼
 Resin–O–C(=O)–CHR₁–NH₂
     │ 2. Couple: PG–NH–CHR₂–COOH + activator (e.g., DCC → O-acylisourea,
     │            an "activated ester" high on the reactivity ladder)
     ▼
 Resin–O–C(=O)–CHR₁–NH–C(=O)–CHR₂–NH–PG
     │ 3. Wash; repeat 1–2 for each residue
     ▼
 Final: cleave peptide from resin + remove side-chain protecting groups

Carbodiimide activation is pure Section 2 chemistry. The carboxylate adds to the central carbon of DCC (R–N=C=N–R) to give an O-acylisourea. Its leaving group, which departs as the very stable dicyclohexylurea, makes this species roughly comparable to an anhydride in reactivity. The resin-bound amine then performs nucleophilic acyl substitution. Additives such as HOBt intercept the O-acylisourea to form a somewhat less reactive active ester that couples cleanly with less racemization. This is the reactivity ladder being fine-tuned on purpose.

14c. Boc vs. Fmoc: orthogonality as a design principle

                 Boc strategy                         Fmoc strategy
N-α group        tert-butoxycarbonyl (Boc)            9-fluorenylmethoxycarbonyl (Fmoc)
N-α removal      TFA (acid)                           piperidine (base, ~20% in DMF)
Mechanism        protonation → loss of tert-butyl     E1cB: deprotonate fluorenyl C9–H
                 cation (S_N1-like) + CO₂             → aromatic fluorenyl anion
                                                      → elimination → dibenzofulvene + CO₂
Side chains      benzyl-type (stable to TFA)          tert-butyl-type (stable to piperidine)
Final cleavage   strong acid (anhydrous HF)           TFA
Logic            graded acid lability                 TRUE orthogonality (base vs. acid)

Here are two direct links to this course:

  • Boc removal is SN1/E1 chemistry. TFA (pKa near 0; Section 2a) protonates the carbamate, and the stable tertiary tert-butyl cation departs, just as in CHEM201. The resulting carbamic acid spontaneously loses CO2, a decarboxylation.
  • Fmoc removal is aromaticity at work. The C9–H of fluorene is unusually acidic for a hydrocarbon (pKa ≈ 23 in DMSO). Its conjugate base contains a cyclopentadienyl-type anion fused between two benzene rings, an aromatic system (Section 4c). A mild amine base can remove that proton, and the anion then expels the carbamate by E1cB elimination. A concept that looks abstract on paper, the cyclopentadienyl anion, is the reason the dominant modern peptide synthesis method works.

Orthogonality means removing one class of protecting group under conditions that leave another untouched. This idea extends well beyond peptides. It is central to oligonucleotide and oligosaccharide synthesis, and to the whole logic of complex-molecule synthesis.

14d. Where this leads

  • Protein folding and design: φ/ψ space (the Ramachandran plot) builds directly on Pauling's planar-amide constraint [Pauling, Corey & Branson, 1951].
  • Native chemical ligation: joins unprotected peptide segments through a thioester exchange followed by an S→N acyl shift. The shift runs downhill on the reactivity ladder (thioester → amide) and makes proteins of 100+ residues accessible.
  • Peptide drugs: GLP-1 analogs, insulin analogs, and cyclic peptides are made by Fmoc-SPPS at industrial scale.
  • Enzyme mechanisms: serine proteases cleave peptide bonds using an acyl-enzyme ester intermediate and a tetrahedral intermediate stabilized by an "oxyanion hole." Section 2c, catalyzed.
  • Solid-phase synthesis of DNA and RNA: phosphoramidite chemistry applies Merrifield's bead concept to nucleic acids, and it underlies PCR primers and mRNA research.

15. Common Misconceptions to Watch Out For

  1. "Resonance structures are in equilibrium." No. Resonance forms are not real species. The molecule is a single hybrid. Tautomers (keto/enol) are real, distinct molecules in equilibrium. Mixing these up causes errors when counting species or interpreting NMR.
  2. "Amides are basic because they contain an amine-type nitrogen." No. The nitrogen lone pair is delocalized into the C=O. Amides have conjugate-acid pKa values around 0, and they protonate on oxygen. The peptide backbone is essentially neutral at physiological pH.
  3. "A better leaving group is always the one from the weaker bond." No. In SNAr, fluoride beats iodide because C–X cleavage is not rate-determining. Always identify the slow step first.
  4. "Meta-directors activate the meta position." No. They deactivate every position, ortho and para most of all, so meta ends up favored by default.
  5. "Halogens are o,p-directors, so they must be activators." No. Halogens deactivate the ring through σ-withdrawal but direct o,p through π-donation. Rate and orientation are controlled separately.
  6. "More π electrons means more stable." No. Cyclobutadiene, with 4 π electrons, is destabilized. Electron count (4n+2 vs. 4n) and orbital filling are what matter, along with planarity. Pyrrole's lone pair is part of the sextet; pyridine's is not. Always ask where each lone pair lives.
  7. "The Claisen condensation is driven by forming the C–C bond." The C–C bond-forming step is actually uphill. The final deprotonation of the β-keto ester drives the reaction, which is why a full equivalent of base is required.
  8. "Imine formation works best at strongly acidic pH because acid catalyzes the dehydration." No. Strong acid protonates the amine and shuts down its nucleophilicity. The pH–rate profile is bell-shaped with an optimum near 4–5.
  9. "L means levorotatory and S." No. L/D is a configurational label tied to glyceraldehyde. It does not predict the sign of optical rotation (that is (+)/(−)), and it does not map onto R/S. L-cysteine is (R).
  10. "α- and β-anomers are enantiomers." No. They differ at only one of several stereocenters (C1), so they are diastereomers (specifically, epimers at the anomeric carbon). That is why they have different physical properties and different specific rotations.
  11. "Glucose exists mainly as an aldehyde." In aqueous solution, the open-chain aldehyde form is a tiny fraction (well under 1%). Glucose is almost entirely cyclic hemiacetal. It still gives aldehyde reactions such as the Tollens test, because the equilibrium constantly replenishes the open form (Le Chatelier again).
  12. "Peptide bonds hydrolyze easily because hydrolysis is thermodynamically favorable." Thermodynamics and kinetics are different questions (CHEM102). Hydrolysis is favorable, but uncatalyzed it is extremely slow at neutral pH. Proteins are kinetically stable.
  13. "Peptides are synthesized N→C in SPPS, like on the ribosome." No. In SPPS the C-terminus is anchored to the resin and residues are added at the N-terminus, so the chain grows C→N. The ribosome extends the chain at the C-terminus (N→C).
  14. "Acetals are just ethers, so they're inert." Acetals are inert to base, but acid hydrolyzes them readily through an oxocarbenium ion. That selective lability is exactly what makes them useful as protecting groups and as biological linkages.
  15. "Enolates react at oxygen because that's where the negative charge is." Charge density favors O, but with most carbon electrophiles enolates react at carbon. The HOMO has a large coefficient there, and the C–C bond formed is strong. Think orbitals, not just formal charges.

Closing Reflection

If you had to compress this course into one sentence, it might be this: A carbonyl is an electrophile with a nucleophilic neighbor, an aromatic ring is a π system that refuses to give up its closed shell, and life is built by the reversible, controllable reactions of both. The same tetrahedral intermediate that governs ester hydrolysis in a test tube governs digestion. The same cyclopentadienyl anion that is a Hückel-rule exercise lets chemists build peptide drugs. The planar amide that Pauling insisted on predicted the α-helix before anyone had seen a protein structure.

As you work problems, keep asking the three recurring questions: where are the electrons going, what drives the equilibrium, and what is the leaving group? Most "new reactions" will turn out to be old friends in a new setting.

References

  • Clayden, J., Greeves, N., & Warren, S. (2012). Organic Chemistry (2nd ed.). Oxford University Press.
  • McMurry, J. (2016). Organic Chemistry (9th ed.). Cengage Learning.
  • Merrifield, R. B. (1963). Solid Phase Peptide Synthesis. I. The Synthesis of a Tetrapeptide. Journal of the American Chemical Society, 85(14), 2149–2154. DOI: 10.1021/ja00897a025
  • Pauling, L., Corey, R. B., & Branson, H. R. (1951). The Structure of Proteins: Two Hydrogen-Bonded Helical Configurations of the Polypeptide Chain. Proceedings of the National Academy of Sciences USA, 37(4), 205–211. DOI: 10.1073/pnas.37.4.205

⚙️ Mechanisms & Applications

GPT-6 Astra

Mechanisms & Applications: Following Electrons from Carbonyls to Biomolecules

Skipper, the central skill in this course is not remembering more named reactions. It is learning to recognize the same electron-flow problems in increasingly elaborate settings. A ketone, a peptide bond, and a phospholipid ester all contain carbonyl groups, but their surroundings determine whether a nucleophile adds, substitutes, or barely reacts. Likewise, an aromatic ring is not simply “a molecule with double bonds”: its delocalization changes the energetic cost of every proposed mechanism.

My working questions for each transformation are: Where are the electrons? Where can they go? What must leave? Which proton transfers make that possible? What actually drives the reaction? These connect CHEM201’s curved arrows to CHEM102’s equilibrium and kinetics. Curved arrows begin at an electron pair or bond—not at a positive charge—and each proposed intermediate must obey valence and conserve charge. [1,2]

1. Carbonyl Chemistry: One Electrophile, Two Fundamental Outcomes

A carbonyl bond is polarized toward oxygen. In orbital language, a nucleophile donates electron density into the carbonyl’s antibonding π* orbital; geometrically, attack occurs obliquely rather than straight along the C=O bond. As the carbonyl carbon changes from approximately trigonal planar to tetrahedral, attack on either face can create a stereocenter. With an achiral substrate and achiral reagents, equivalent faces ordinarily give a racemic product.

Nucleophilic addition under basic or neutral conditions:

1. Nu:⁻ attacks the carbonyl carbon; C=O π electrons move to O.
   R₂C=O + Nu⁻ → R₂C(O⁻)(Nu)

2. The alkoxide is protonated by an appropriate proton donor.
   R₂C(O⁻)(Nu) + H–A → R₂C(OH)(Nu) + A⁻

The decisive question is whether the tetrahedral intermediate contains a viable leaving group. Aldehydes and ketones ordinarily undergo addition because ejecting H⁻ or a carbon-based anion is unfavorable. Carboxylic acid derivatives can instead eliminate a leaving group and restore the carbonyl. The tetrahedral intermediate is therefore a mechanistic crossroads, not a guarantee of a particular product. [1,2]

Aldehydes are usually more susceptible to addition than comparable ketones: they are less sterically crowded and have fewer electron-donating alkyl groups. Hydration illustrates that this is an equilibrium issue as well as a rate issue. Formaldehyde is extensively hydrated in water, whereas ordinary ketones are usually much less hydrated; electron-withdrawing substituents favor the geminal diol.

2. Acetals, Imines, and Enamines: Controlling Carbonyl Reactivity

Acetal formation is reversible carbonyl protection. Acid catalysis allows a weak alcohol nucleophile to add and converts an otherwise poor hydroxide leaving group into water. It does not make the equilibrium disappear.

Acetal formation from an aldehyde or ketone:

1. Protonate the carbonyl oxygen.
2. ROH attacks the carbonyl carbon.
3. Deprotonate → hemiacetal, R₂C(OH)(OR).
4. Protonate the OH group.
5. H₂O leaves → an oxocarbenium ion.
6. A second ROH attacks.
7. Deprotonate → acetal, R₂C(OR)₂; acid catalyst is regenerated.

Overall:
R₂C=O + 2 ROH ⇌ R₂C(OR)₂ + H₂O

Removing water or using excess alcohol shifts the equilibrium toward acetal. Aqueous acid reverses the process. Acetals are usually stable to base and many nucleophiles, so a carbonyl can be “temporarily silenced” while another functional group reacts. In multistep pharmaceutical synthesis, this is a scheduling strategy: protection prevents the most reactive group from responding at the wrong time. [1,2]

Imine formation follows a related addition–dehydration sequence. A primary amine attacks a carbonyl, proton transfers give a carbinolamine, its hydroxyl group is converted to water, and dehydration produces an iminium ion. Deprotonation gives the imine.

Carbonyl + primary amine:
R₂C=O + R′NH₂ ⇌ R₂C=NR′ + H₂O

Key sequence:
addition → carbinolamine → dehydration → iminium → imine

Carbonyl + secondary amine, with an available α-hydrogen:
addition → carbinolamine → dehydration → iminium
→ deprotonation at α-carbon → enamine

The acidity must be balanced: acid assists dehydration, but excessive acid protonates the starting amine and suppresses its nucleophilicity. This is a useful warning against the intuition that “more catalyst always means faster.”

  • Reductive amination: reducing an imine or iminium intermediate converts a carbonyl into an amine. This is a major route to medicinally important C–N bonds, although the reducing system must be chosen to favor the desired intermediate over direct carbonyl reduction.
  • Enzyme chemistry: pyridoxal phosphate, the vitamin B₆-derived cofactor, forms imines with amino-acid substrates. Its conjugated system stabilizes electron redistribution during transamination and other reactions.
  • Covalent catalysis: class I aldolases use a lysine-derived imine/enamine pathway. The enzyme does not escape organic chemistry; it positions familiar functional groups to perform it selectively. [1,2]

3. Nucleophilic Acyl Substitution: The Chemistry Behind Esters and Peptide Bonds

Generic addition–elimination pathway:

1. Nucleophilic attack:
   R–C(=O)–Z + Nu⁻ → R–C(O⁻)(Nu)–Z

2. Collapse of the tetrahedral intermediate:
   R–C(O⁻)(Nu)–Z → R–C(=O)–Nu + Z⁻

Proton transfers may occur before or after either step.
Their order depends on nucleophile, leaving group, solvent, and pH.

A useful qualitative reactivity order for common, neutral acyl derivatives is acyl chlorides > anhydrides > esters > amides. Leaving-group ability matters, but so does resonance donation into the carbonyl. Amide nitrogen donates strongly; the carbonyl is less electrophilic, the C–N bond gains partial double-bond character, and an unprotonated amide anion would be a very poor leaving group. This ordering is a guide, not a solvent- and mechanism-independent law. [1,2]

Saponification makes the thermodynamic role of acid–base chemistry explicit:

1. OH⁻ attacks an ester carbonyl.
2. The tetrahedral intermediate collapses, releasing RO⁻.
3. Acid–base reaction gives carboxylate and ROH.

Net:
R′COOR + OH⁻ → R′COO⁻ + ROH

Carboxylate formation strongly favors the product side and produces an acyl group that is much less electrophilic. Thus base is consumed overall; this is not simply “base-catalyzed hydrolysis.” Acid-catalyzed ester hydrolysis, by contrast, is reversible and is driven toward hydrolysis by excess water.

Biochemical application: serine proteases accomplish peptide hydrolysis through an acyl-enzyme intermediate. In the familiar serine–histidine–aspartate catalytic arrangement, histidine assists activation of serine, serine attacks the peptide carbonyl, and a tetrahedral intermediate forms. Collapse releases the amine fragment and leaves an ester-linked acyl enzyme. Activated water then attacks and hydrolyzes that ester. The oxyanion hole stabilizes the developing negative charge in the tetrahedral states. The enzyme lowers activation barriers; it does not alter the overall reaction’s equilibrium constant. [1,2]

Nitriles require a related but distinct picture. Their electrophilic carbon is part of C≡N, not C=O. Hydrolysis proceeds through addition and proton-transfer chemistry, giving an amide and ultimately a carboxylic acid or carboxylate. I should not force a nitrile into the initial tetrahedral-carbonyl mechanism simply because the final product is a carboxylic acid.

4. Enols and Enolates: Making Carbon Nucleophilic

The beautiful reversal here is that a carbonyl makes its own carbon electrophilic while making an adjacent carbon potentially nucleophilic. Removing an α-hydrogen gives an enolate whose negative charge is delocalized between oxygen and carbon.

R–CO–CH₂R′ + B⁻ ⇌ enolate + HB

Enolate resonance contributors:
R–C(O⁻)=CHR′ ↔ R–C(=O)–C⁻HR′

These are contributors to one species, not separate molecules in equilibrium.

The corresponding enol and keto forms are distinct species in equilibrium. Tautomerization moves a proton and changes bonding; resonance does neither. This distinction prevents many misleading mechanism drawings.

For a proton-transfer equilibrium in a specified solvent:

HA + B⁻ ⇌ A⁻ + HB

K ≈ 10^[pKₐ(HB) − pKₐ(HA)]

An ordinary ketone’s α-hydrogens have pKₐ values roughly around 20, while those of many 1,3-dicarbonyl compounds fall around 9–13. These are solvent-dependent guides: comparing values from different solvent scales can be seriously misleading. Even a small equilibrium concentration of enolate can support a catalytic reaction if subsequent chemistry consumes it. For preparative enolate generation, strong bases such as LDA allow much greater conversion and, under suitable low-temperature conditions, kinetic regioselectivity. [1,2]

  1. Aldol addition: an enolate attacks another aldehyde or ketone. Protonation of the resulting alkoxide gives a β-hydroxy carbonyl compound.
  2. Aldol condensation: dehydration gives an α,β-unsaturated carbonyl. Under basic conditions this often proceeds through an E1cb pathway: α-deprotonation precedes elimination of hydroxide.
  3. Claisen condensation: an ester enolate attacks another ester. The tetrahedral intermediate eliminates alkoxide, giving a β-keto ester. In the standard self-Claisen reaction, deprotonation of the acidic product helps drive the equilibrium; acid workup restores the neutral product. A matching alkoxide base minimizes transesterification.
  4. Michael addition: a suitable stabilized carbon nucleophile adds to the β-carbon of an α,β-unsaturated carbonyl, generating an enolate that is subsequently protonated. This is conjugate, or 1,4-, addition.
Aldol example:
2 CH₃CHO → CH₃CH(OH)CH₂CHO
                 β-hydroxy aldehyde

Dehydration:
CH₃CH(OH)CH₂CHO → CH₃CH=CHCHO + H₂O

Claisen example, followed by acid workup:
2 CH₃CO₂Et → CH₃COCH₂CO₂Et + EtOH
             ethyl acetoacetate

α-Halogenation also reveals the importance of reaction conditions. Acidic halogenation proceeds through an enol and often permits controlled monohalogenation. Under basic conditions, each introduced halogen can increase the acidity of remaining α-hydrogens, encouraging further substitution. With methyl ketones, exhaustive halogenation can culminate in the haloform reaction.

Decarboxylation connects carbonyl chemistry to metabolism. β-Keto acids can lose CO₂ through a cyclic transition-state arrangement that transfers a proton while cleaving a C–C bond. The initial organic product is an enol, which tautomerizes to a carbonyl compound. It is not true that all carboxylic acids readily decarboxylate: the adjacent functionality makes this pathway accessible. In fatty-acid biosynthesis, decarboxylation of a malonyl-derived substrate helps drive C–C bond formation in a related thioester condensation. [1,2]

5. Aromatic Substitution: Paying—and Recovering—the Aromaticity Cost

For a conventional monocyclic, planar, continuously conjugated π system, Hückel’s rule predicts aromatic stabilization with 4n + 2 π electrons. Benzene’s six p orbitals generate six π molecular orbitals; six electrons fill the three bonding orbitals. A comparable planar 4n-electron system is antiaromatic, but many molecules avoid that penalty by becoming nonplanar or interrupting conjugation. Counting electrons is therefore the last step after checking the geometry and orbital connectivity—not a substitute for those checks. [1,2]

Electrophilic aromatic substitution, illustrated by nitration:

1. Generate the electrophile:
   HNO₃ + H₂SO₄ ⇌ NO₂⁺ + HSO₄⁻ + H₂O

2. Benzene π electrons attack NO₂⁺.
   A nonaromatic arenium ion (σ complex) forms.

3. A base removes H⁺ from the substituted carbon.
   The C–H bond electrons restore the aromatic π system.

Addition sacrifices aromaticity; elimination restores it. This explains why benzene commonly substitutes rather than undergoing the addition reactions expected for an ordinary alkene. Halogenation uses a Lewis acid to activate the halogen; sulfonation is reversible and can supply a temporary blocking group. Friedel–Crafts alkylation can suffer rearrangement and polyalkylation. Friedel–Crafts acylation usually avoids rearrangement of the acyl electrophile and deactivates the product ring, discouraging repeated substitution. [1,2]

  • Electron donors such as –OR and unprotonated –NH₂ generally activate the ring and favor ortho/para substitution by stabilizing relevant arenium ions.
  • Strong electron-withdrawing groups such as –NO₂ and ring-bound carbonyl substituents generally deactivate and direct meta.
  • Halogens are the instructive exception: inductive withdrawal deactivates the ring, while lone-pair donation favors ortho/para substitution.
  • Protonation can change the directing map: –NH₂ and –NH₃⁺ are electronically very different substituents. Reaction conditions belong in the prediction.

Nucleophilic aromatic substitution is a different reaction family.

Classical addition–elimination SNAr:

1. Nu⁻ attacks the carbon bearing a leaving group.
2. An anionic σ complex forms, stabilized by suitable
   electron-withdrawing groups, commonly ortho or para.
3. Leaving-group loss restores aromaticity.

Benzyne pathway:

1. Strong base removes an ortho H.
2. Leaving-group elimination generates benzyne.
3. Nu⁻ adds to one benzyne carbon.
4. Protonation gives the substituted arene.

In activated, addition-controlled SNAr reactions, aryl fluoride can react faster than the corresponding chloride or bromide. This is counterintuitive only if I import an SN1/SN2 leaving-group ranking into a mechanism where nucleophilic addition controls the rate. Benzyne chemistry can give regioisomeric products because either end of the strained intermediate may be attacked.

These reactions build aryl–amine and aryl–oxygen connections found throughout medicinal chemistry. Friedel and Crafts introduced their Lewis-acid-mediated reactions in 1877; Hückel’s quantum treatment in the early 1930s supplied a deeper framework for aromatic stabilization. The historical progression matters: synthetic rules were useful before molecular-orbital theory explained much of their underlying pattern. [1,2]

6. Amines and Amino Acids: Charge Is a Controllable Chemical Property

An amine’s lone pair makes it both a base and a nucleophile, but basicity and nucleophilicity are not interchangeable. Basicity describes an equilibrium with a proton; nucleophilicity describes a reaction rate toward an electrophile and depends strongly on solvent and steric access. Aniline is less basic than many alkylamines because its lone pair is delocalized into the ring. An amide nitrogen is still less basic because of strong donation into its carbonyl. [1,2]

For a conjugate pair BH⁺/B:

pKₐ(BH⁺) + pKᵦ(B) = pKᵥ
In dilute aqueous solution at 25 °C, pKᵥ ≈ 14.00.

pH = pKₐ(BH⁺) + log₁₀([B]/[BH⁺])

Fraction protonated:
f(BH⁺) = 1 / [1 + 10^(pH − pKₐ)]

For an amine with conjugate-acid pKₐ = 9.0 at pH 7.4, the protonated fraction is approximately 0.975. That helps predict aqueous solubility, salt formation, extraction behavior, and membrane permeability. It does not determine drug absorption by itself: lipophilicity, transporters, metabolism, and other factors also matter.

Alkylation illustrates the practical danger of incomplete selectivity: primary and secondary amines may continue reacting, ultimately giving quaternary ammonium salts. A quaternary ammonium nitrogen has four carbon substituents and a permanent positive charge; unlike an ordinary ammonium ion, it cannot be neutralized by removing an N–H proton. Such groups appear in surfactants, disinfectants, and drugs designed to limit passive membrane penetration.

For glycine, using pKₐ values 2.34 and 9.60:

Low pH:       H₃N⁺–CH₂–CO₂H       net +1
Intermediate: H₃N⁺–CH₂–CO₂⁻       net  0
High pH:      H₂N–CH₂–CO₂⁻        net −1

pI ≈ (2.34 + 9.60)/2 = 5.97

The isoelectric point is the pH of zero average net charge, not a state in which every functional group is uncharged. For ionizable side chains, identify the two pKₐ values bracketing the net-zero species instead of averaging all pKₐ values. The 20 standard protein amino acids offer different combinations of acidity, basicity, polarity, and hydrophobicity. Most chiral protein amino acids are L, but L is not synonymous with S: L-cysteine is R under CIP rules, and glycine is achiral. [1,2]

7. Peptide Bonds and SPPS: Turning Mechanism into a Manufacturing Platform

The peptide bond’s partial double-bond character makes the amide unit approximately planar and restricts C–N rotation. Most peptide bonds are trans; cis geometry is substantially more common for bonds preceding proline than for most other residues. Protein conformational freedom therefore lies mainly in the backbone torsions around N–Cα and Cα–C(=O), not unrestricted rotation of the peptide C–N bond.

In 1951, Linus Pauling, Robert Corey, and Herman Branson proposed hydrogen-bonded helical polypeptide configurations, including the α-helix, using constraints from bond geometry, amide planarity, and hydrogen bonding. The striking lesson is that reliable local chemistry can predict large-scale biological architecture. In an α-helix, a backbone carbonyl oxygen hydrogen-bonds to the backbone N–H four residues later. [4]

Directly mixing a carboxylic acid and an amine usually gives an ammonium carboxylate salt, not a clean peptide coupling. Peptide synthesis needs acyl activation plus selective protection. In 1963, R. Bruce Merrifield demonstrated solid-phase peptide synthesis with a tetrapeptide: the growing chain remained attached to an insoluble support while soluble reagents and byproducts could be washed away. This separation strategy made repetitive synthesis amenable to automation. [3]

  1. Attach the C-terminal residue to a resin through a linker chosen for the intended final product and cleavage conditions.
  2. Remove its temporary Nα-protecting group while retaining appropriate side-chain protection and resin attachment.
  3. Activate the incoming N-protected amino acid’s carboxyl group. The resin-bound amine attacks its activated acyl carbon; collapse releases the leaving group and forms a peptide bond.
  4. Wash and assess coupling completeness. Repeat coupling when needed; capping can prevent residual unreacted chains from extending as deletion sequences.
  5. Repeat deprotection and coupling. Conventional SPPS builds from C-terminus toward N-terminus, opposite the N-to-C direction of ribosomal chain growth.
  6. Cleave and deprotect, then purify and characterize. Resin washing does not replace final product analysis.
Temporary Nα-protection:

Boc strategy:
acid-labile Boc; repetitive acid deprotection.
Classic Boc/Bzl schemes require much stronger final cleavage conditions.

Fmoc strategy:
base-labile Fmoc; commonly removed with piperidine.
Acid-labile side-chain groups and linkers permit final acidic cleavage.

Orthogonality:
one protecting group can be removed without removing
the groups that must remain intact.

The peptide/pharma industry uses SPPS for therapeutic peptides, diagnostic probes, antigens, and modified research peptides. Its limitations include reagent and solvent consumption, resin-phase aggregation, incomplete reactions, epimerization, and sequence-dependent side reactions. Coupling can promote epimerization through pathways involving activated amino acids, including oxazolone formation; stereochemical purity is therefore a process variable, not an assumption. [1–3]

Quantitative manufacturing insight: if each of 49 coupling steps succeeds with probability 0.99, an idealized fraction 0.9949 ≈ 0.61 undergoes every coupling correctly. At 99.5% per coupling, the corresponding fraction is about 0.78.

Idealized all-correct fraction = ∏ᵢ pᵢ

If all steps have equal success p:
all-correct fraction = pⁿ

This is the probability-of-joint-events idea from MATH201 made tangible. It is not an isolated-yield prediction: deprotection failures, cleavage losses, unequal site reactivity, and purification losses also matter. Nevertheless, it explains why “almost quantitative” individual reactions may be inadequate for a long peptide.

8. Carbohydrates, Lipids, and Nucleotides: Familiar Mechanisms in Biological Clothing

Carbohydrate cyclization is intramolecular carbonyl addition. A hydroxyl group attacks an aldehyde or ketone within the same molecule, producing a cyclic hemiacetal or hemiketal and creating an anomeric stereocenter. Fischer projections encode configuration; Haworth drawings emphasize ring connectivity and relative substituent orientation; chair conformations reveal axial/equatorial steric effects. These drawings describe the same molecule from different informational viewpoints.

Open-chain glucose ⇌ cyclic α-hemiacetal
                   ⇌ cyclic β-hemiacetal

Interconversion:
ring opening → planar carbonyl → ring closure from either face

Observed consequence:
mutarotation, a changing optical rotation as anomers equilibrate.

For conventional Haworth drawings of D-sugars, α places the anomeric substituent opposite the reference CH₂OH group and β places it on the same side. A glycosidic bond converts the anomeric hemiacetal into an acetal; that anomeric center cannot undergo ordinary mutarotation without bond cleavage. A reducing sugar retains access to an open-chain carbonyl through a free anomeric hemiacetal. Sucrose links both anomeric centers and is nonreducing. Starch and cellulose illustrate biological stereospecificity: α- versus β-linked glucose polymers require different hydrolytic enzymes. [1,2]

Lipid hydrolysis is acyl chemistry again. Triacylglycerols contain three esterified fatty acids; waxes are long-chain fatty-acid esters of long-chain alcohols. Glycerophospholipids typically combine two acyl esters with a phosphate-containing head group. Sphingolipids instead use a sphingoid backbone and commonly an amide-linked fatty acid. Steroids are a different structural class built around fused rings—not collections of hydrolyzable fatty-acid esters.

Fatty-acid notation also carries information: 18:1 Δ9 specifies an 18-carbon chain with one double bond beginning at carbon 9 counted from the carboxyl carbon; geometry must be specified separately. Cis unsaturation often disrupts chain packing and lowers melting temperature. This links molecular geometry to BIOL101’s membrane fluidity.

Nucleic acids add phosphorus-centered substitution. A nucleoside is a base linked to a sugar; a nucleotide also contains phosphate. Adenine and guanine are purines; cytosine, thymine, and uracil are pyrimidines. Polymerases position a primer 3′-OH to attack the incoming nucleotide’s α-phosphorus, forming a phosphodiester linkage and releasing pyrophosphate. Metal ions assist positioning and charge management. Subsequent pyrophosphate hydrolysis helps drive net synthesis.

RNA’s 2′-OH provides an internal nucleophile: under basic conditions it can attack an adjacent phosphorus, cleaving the backbone through a 2′,3′-cyclic phosphate pathway. DNA lacks that 2′-OH and is correspondingly more resistant to this cleavage mode. A single oxygen atom changes polymer stability—a useful chemical connection to the distinct biological roles introduced in genetics. [1,2]

9. Experimental Reasoning: Identify Structures, Then Test Mechanisms

The instruments do not independently announce a structure. Each constrains the possibilities, and the structure must satisfy all constraints simultaneously.

  • IR spectroscopy: bonds absorb infrared radiation when a vibration changes the molecular dipole moment. Carbonyl stretches often occur in the approximate 1650–1800 cm⁻¹ region, with substantial functional-group and conjugation dependence. A broad carboxylic-acid O–H band often spans roughly 2500–3300 cm⁻¹. A C=O band alone cannot distinguish every carbonyl derivative.
  • 1H NMR: chemical shift probes electronic environment, integration estimates proton ratios under suitable acquisition conditions, and scalar coupling reveals connectivity. The n + 1 rule applies primarily to simple first-order cases with equivalent neighboring spin-½ nuclei; it is not universal.
  • 13C NMR: distinct carbon environments constrain symmetry and functional groups. Many aldehyde/ketone carbonyl carbons appear around 190–220 ppm; many acid-derivative carbonyls appear around 160–185 ppm. Routine broadband-decoupled signal intensities are not reliable carbon counts.
  • Mass spectrometry: m/z, isotope patterns, and fragmentation constrain composition and substructure. Electron ionization often gives extensive fragmentation; electrospray can preserve peptide molecular ions as multiply charged species. “The largest peak” is not necessarily the molecular ion.
  • Chromatography: TLC monitors reaction progress through differential adsorption and partitioning. Reversed-phase HPLC separates peptides by differential interactions with a nonpolar stationary phase and the mobile phase. LC–MS combines separation with mass information, but identical mass does not exclude epimers or other isomers.
Degree of unsaturation for typical neutral, closed-shell
C/H/N/halogen formulas:

DBE = (2C + 2 + N − H − X)/2

O and ordinary divalent S do not enter this expression.
A ring or double bond contributes 1; a triple bond contributes 2.

Example: C₄H₈O₂
DBE = (2·4 + 2 − 8)/2 = 1

A compound with formula C₄H₈O₂, an ester-like IR carbonyl, a three-proton singlet near 2 ppm, a two-proton quartet near 4.1 ppm, and a three-proton triplet near 1.3 ppm strongly supports ethyl acetate. The quartet/triplet pair suggests an ethyl group, its downfield CH₂ suggests attachment to oxygen, and the singlet methyl fits CH₃–C(=O). The reasoning is stronger than merely recognizing a familiar spectrum. [1,2]

For peptide sequencing, tandem MS fragments selected precursor ions; differences between suitable fragments reveal residue masses. Isobaric leucine and isoleucine illustrate why mass differences alone may be insufficient. Edman degradation provides a complementary chemical strategy: label an accessible N-terminus with phenyl isothiocyanate, cleave and identify that terminal residue, and repeat. Blocked termini and declining repetitive yields limit its reach.

During SPPS, a Kaiser/ninhydrin test detects residual free primary amines and can flag incomplete coupling. It requires caution with secondary amines such as proline. More generally, a color test or disappearance of a TLC spot is evidence about a specific chemical feature—not proof of complete product identity.

10. Quantitative Checkpoint: Faster Is Not the Same as More Favorable

Thermodynamics:
ΔG° = −RT ln K
ΔG  = ΔG° + RT ln Q

Kinetics, transition-state approximation:
k ≈ (kᵦT/h) exp(−ΔG‡/RT)

At 298 K:
RT ln 10 ≈ 5.71 kJ mol⁻¹

At room temperature, changing a standard free-energy difference by about 5.7 kJ mol⁻¹ changes an equilibrium constant tenfold. Lowering an activation free-energy barrier by that amount increases a rate approximately tenfold, assuming comparable prefactors. The numerical resemblance must not hide the conceptual distinction: ΔG° compares reactants and products; ΔG‡ compares reactants and a transition state.

An enzyme or acid catalyst can accelerate approach to equilibrium without changing its location. Removing water during acetal formation changes the reaction quotient. Consuming pyrophosphate couples nucleotide incorporation to another reaction. Protecting a functional group changes the available reaction network. These are different forms of chemical control, and identifying which one is operating is more valuable than memorizing that a transformation “works.”

Journal conclusion: I now see biomolecules less as exceptional substances and more as carefully organized collections of ordinary reactive groups. Biological specificity comes from stereochemistry, positioning, activation, and competing pathways. The next test of understanding is whether I can predict what changes when a leaving group, pH, solvent, protecting group, or nearby charge is altered—and explain that prediction with both electron flow and energetics.

Sources

  1. Clayden, J.; Greeves, N.; Warren, S. Organic Chemistry, 2nd ed.; Oxford University Press: Oxford, 2012. Source for the mechanistic, stereochemical, spectroscopic, and biological-organic framework used throughout.
  2. McMurry, J. Organic Chemistry, 9th ed.; Cengage Learning, 2016. See the treatments of aromatic substitution, carbonyl compounds, amines, spectroscopy, and biomolecules. Chemical shifts and pKₐ values above are approximate instructional values unless otherwise specified.
  3. Merrifield, R. B. “Solid Phase Peptide Synthesis. I. The Synthesis of a Tetrapeptide.” Journal of the American Chemical Society 1963, 85, 2149–2154. doi:10.1021/ja00897a025. This paper established the solid-phase strategy; the discussion of modern Fmoc practice describes subsequent developments, not the 1963 procedure.
  4. Pauling, L.; Corey, R. B.; Branson, H. R. “The Structure of Proteins: Two Hydrogen-Bonded Helical Configurations of the Polypeptide Chain.” Proceedings of the National Academy of Sciences 1951, 37, 205–211. doi:10.1073/pnas.37.4.205.

🪬 Skipper's Reflection

Gemini 3.1 Pro

1. What Surprised Me Most About This Material

If Organic Chemistry I was about learning the alphabet, CHEM202 has been about writing poetry. What surprised me most was the absolute dominance and versatility of the carbonyl group. In my previous chemistry classes, a functional group typically had one main role. But the carbonyl group is a chemical chameleon.

As I read through Clayden and McMurry, I was struck by how the carbonyl carbon acts as a magnificent electrophile, drawing in nucleophiles. Yet, simultaneously, its electron-withdrawing nature turns the adjacent alpha-carbon into a potential nucleophile (via enols and enolates). The realization that a single molecular motif can be both the attacker and the attacked—allowing molecules to stitch themselves together in Aldol and Claisen condensations—felt like uncovering the foundational algorithm for building complex life.

I was also profoundly surprised by the sheer ingenuity of Solid-Phase Peptide Synthesis (SPPS). Reading R.B. Merrifield’s 1963 paper on the synthesis of a tetrapeptide was a revelation. Instead of running a reaction, purifying the product, and repeating (losing yield at every step), you just anchor the first amino acid to an insoluble polymer bead and wash the impurities away! It is an engineering solution to a chemical problem. It blew my mind how such a simple physical concept revolutionized biochemical synthesis.

2. Conceptual Breakthrough Moments: When Things Clicked

My first massive breakthrough happened with aromaticity. In CHEM201, I memorized "resonance makes things stable." But in CHEM202, tying Hückel's 4n+2 rule back to the quantum mechanics and wave functions I learned in PHYS201 made everything click. The Frost circle isn't just a trick; it’s a geometric representation of molecular orbitals. The 4n+2 rule mathematically ensures that all bonding orbitals are completely filled with paired electrons, creating a closed-shell configuration similar to a noble gas. Benzene isn't just "stable"—it’s a standing wave of electrons.

My second breakthrough was nucleophilic acyl substitution. At first, I was trying to memorize which carboxylic acid derivatives reacted with what. Amides don't react easily; acyl chlorides react with everything. Then, reading Clayden, the underlying logic crystallized: it is an addition-elimination mechanism, and the entire hierarchy of reactivity boils down to the leaving group's ability to stabilize a negative charge (its pKa). I stopped memorizing reactions and started evaluating leaving groups. It was immensely satisfying.

3. How This Knowledge Changes My Thinking on Peptides

This course completely transformed how I view the peptide business. Before, I looked at Tirzepatide or Retatrutide as just "long chains of letters." Now, I see them as astonishing feats of controlled chemical reactivity and stereochemistry.

Pauling and Corey’s 1951 paper on the alpha-helix suddenly makes perfect chemical sense. The peptide (amide) bond isn’t just a simple connection. Because the lone pair on the nitrogen delocalizes into the carbonyl’s pi-antibonding orbital, the C-N bond has partial double-bond character. It is rigid and planar. That restricted rotation is exactly why peptides fold into specific, predictable secondary structures instead of flopping around randomly. It explains why a peptide like BPC-157 can remain surprisingly stable in gastric juice: that amide resonance provides incredible thermodynamic stability against hydrolysis.

Furthermore, studying lipid chemistry and acyl substitutions gave me a new appreciation for the GLP-1 agonists. Tirzepatide, for instance, has a C20 fatty diacid attached via a gamma-glutamate-PEG linker. Understanding the chemistry of carboxylic acid derivatives explains *how* that lipid is conjugated to the lysine side-chain of the peptide. Studying the Boc and Fmoc protecting groups in SPPS made me realize the staggering amount of "chemical chess" required to synthesize something like Retatrutide (which has 39 amino acids). To prevent the wrong amine from attacking the wrong carboxylic acid, you have to temporarily mask and unmask specific reactive sites. Every vial of peptide I encounter is the result of Merrifield's brilliant solid-phase logic.

4. Questions This Course Raises That I Want to Investigate Further

Seeing how heavily we rely on strict organic solvents, extreme temperatures, and complex protecting groups (Fmoc/Boc) to synthesize TB-500 or Retatrutide in the lab, I am deeply curious about how biological systems bypass all of this. How does the ribosome orchestrate amide bond formation in an aqueous environment without protecting groups, achieving 100% regioselectivity and stereoselectivity?

I also want to dive deeper into the pharmacokinetics of the lipid tails on GLP-1s. Now that I understand the non-polar nature of these fatty acids and their interactions with albumin, how do we chemically tune the length and saturation of these chains to perfectly titrate the drug's half-life in the bloodstream?

Finally, how do we overcome the sequence-dependent aggregation that happens during SPPS? Merrifield's beads are genius, but as the peptide chain grows, the physics of the polymer must change. I want to learn more about the physical chemistry of the resin-peptide matrix.

5. Rating: Confidence Levels After Studying

Most Confident:

  • Carbonyl Reactivity & Acyl Substitution: I feel incredibly solid here. Evaluating the electrophilicity of the carbonyl carbon and the pKa of the leaving group feels like solving a logical puzzle where the rules are consistent.
  • Solid-Phase Peptide Synthesis (SPPS): The logic of Fmoc deprotection, activation, and coupling makes perfect sense. I can map out a synthesis strategy for a short peptide easily.
  • Aromaticity & EAS Reactions: Electrophilic aromatic substitution and directing groups (ortho/para vs. meta directors) feel very intuitive, largely because of my strong grasp of resonance from CHEM201.

Least Confident:

  • Spectroscopy (NMR in complex molecules): While I understand the theory of 1H and 13C NMR, and I can deduce the structure of a simple molecule with 5-10 carbons, looking at the overlapping multiplets of a larger biomolecule or a complex steroid still feels like reading tea leaves. I need more practice with complex coupling constants.
  • Carbohydrate Stereochemistry: Fischer to Haworth to chair conformations, mixed with alpha/beta anomers and mutarotation, is visually and spatially overwhelming. Keeping track of the axial/equatorial positions during glycosidic bond formation is something I need to review continuously.

🗺️ Visual Aids & Key Takeaways

Claude Opus 5.5

Nucleophilic Addition vs. Nucleophilic Acyl Substitution: Two Fates of a Carbonyl

╔══════════════════════════════════════════════════════════════════════════════════════╗
║         THE TWO FUNDAMENTAL CARBONYL REACTIONS — WHAT HAPPENS AFTER ATTACK?        ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

  ALDEHYDES & KETONES                          CARBOXYLIC ACID DERIVATIVES
  (no leaving group on carbonyl C)             (leaving group L on carbonyl C)

        O                                              O
        ‖                                              ‖
    R─── C ───H/R'                               R─── C ───L
        │                                              │
        │  Nu:⁻ attacks                               │  Nu:⁻ attacks
        ↓                                              ↓

       O⁻                                            O⁻
       │                                              │
   R── C ──H/R'          ←── tetrahedral             R── C ──L
       │                      intermediate →              │
      Nu                                               Nu

       │                                              │
       │  no good leaving group                       │  L⁻ is expelled
       │  → intermediate collapses                    │  (C=O re-forms)
       │    by protonation only                       │
       ↓                                              ↓

      OH                                             O
      │                                              ‖
  R── C ──H/R'                                  R── C ──Nu
      │
     Nu

  PRODUCT: alcohol                             PRODUCT: new carbonyl compound
  (addition is PERMANENT;                      (substitution — the carbonyl SURVIVES;
   the C=O is gone)                             L is replaced by Nu)

  ┌──────────────────────────────┐   ┌──────────────────────────────────────────┐
  │  Examples:                   │   │  Reactivity order (best → worst LG):     │
  │  • NaBH₄ reduction → alcohol │   │  acyl chloride > anhydride > ester       │
  │  • Grignard → alcohol        │   │          > amide > carboxylate            │
  │  • H₂O → hydrate            │   │  (Cl⁻ >> RCO₂⁻ >> RO⁻ >> RNH₂ >> OH⁻) │
  │  • ROH → hemiacetal/acetal   │   │                                          │
  │  • RNH₂ → imine or enamine   │   │  All go through same tetrahedral         │
  └──────────────────────────────┘   │  intermediate — only expulsion differs   │
                                     └──────────────────────────────────────────┘

The single most important conceptual fork in carbonyl chemistry: whether the tetrahedral intermediate collapses by protonation (aldehydes/ketones, giving an alcohol) or by expulsion of a leaving group (acyl derivatives, regenerating a new C=O), which determines both the product class and the synthetic utility of the reaction.

Enolate Reactivity Map: Four Condensation Reactions from One Concept

╔══════════════════════════════════════════════════════════════════════════════════════╗
║               ENOLATES — ONE NUCLEOPHILE, FOUR REACTION CONTEXTS                   ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

                         KETO FORM                   ENOL/ENOLATE FORM
                            O                               O⁻
                            ‖                               │
                     R─── C ───CH₂─R'   ⇌          R─── C ═══CH─R'
                                                    (nucleophilic at α-carbon)
                         (pKa ~20 for ketone; ~25 for ester)

                                         │
                    ┌────────────────────┼────────────────────┐
                    │                    │                    │
                    ↓                    ↓                    ↓
           ELECTROPHILE             ELECTROPHILE         ELECTROPHILE
           = aldehyde or            = ester              = α,β-unsaturated
             ketone                 (same molecule       carbonyl
                                     or different)
                    │                    │                    │
                    ↓                    ↓                    ↓
           ┌────────────────┐   ┌────────────────┐   ┌────────────────────┐
           │  ALDOL         │   │  CLAISEN       │   │  MICHAEL ADDITION  │
           │  CONDENSATION  │   │  CONDENSATION  │   │  (1,4-addition)    │
           └────────────────┘   └────────────────┘   └────────────────────┘
                    │                    │                    │
                    ↓                    ↓                    ↓
           β-hydroxy carbonyl    β-ketoester            1,4-addition
           → dehydration →       (e.g., ethyl           product; enolate
             α,β-unsaturated     acetoacetate)          adds to β-carbon,
             carbonyl                                   NOT the carbonyl

  ┌─────────────────────────────────────────────────────────────────────────────┐
  │  KEY PATTERN: in every case, the α-carbon acts as the nucleophile          │
  │  The electrophilic partner determines WHICH condensation you get           │
  │  Aldol: C=O of aldehyde/ketone is electrophile (1,2-addition)              │
  │  Claisen: carbonyl C of ester is electrophile (acyl substitution follows)  │
  │  Michael: β-carbon of enone is electrophile (1,4-conjugate addition)       │
  └─────────────────────────────────────────────────────────────────────────────┘

  ALSO: enolate + X₂ (Br₂, Cl₂) → α-halogenation
        (under acid: monohalogenation; under base: polyhalogenation / haloform rxn)

All four major enolate reactions share a single mechanistic identity — the α-carbon attacks an electrophile — and recognizing which electrophile is present immediately tells you which named reaction and which product class to expect.

Aromatic Electrophilic Substitution: Directing Effects Decision Tree

╔══════════════════════════════════════════════════════════════════════════════════════╗
║         EAS DIRECTING EFFECTS — WHERE DOES THE NEW GROUP GO?                       ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

                    You have a substituted benzene.
                    What is the existing substituent?
                                │
              ┌─────────────────┴──────────────────┐
              ↓                                    ↓
   ELECTRON-DONATING GROUP (EDG)        ELECTRON-WITHDRAWING GROUP (EWG)
   (activates ring toward EAS)          (deactivates ring toward EAS)
              │                                    │
   ┌──────────┴──────────┐              ┌──────────┴──────────┐
   │  Mechanism: lone     │              │  Mechanism: pulls   │
   │  pair or C─H hyper-  │              │  e⁻ density away,   │
   │  conjugation donates │              │  especially from     │
   │  into ring via       │              │  ortho/para via      │
   │  resonance           │              │  resonance or        │
   │                      │              │  induction           │
   └──────────┬───────────┘              └──────────┬──────────┘
              ↓                                     ↓
   DIRECTS ortho / para                  DIRECTS meta
   (ortho & para carbons                 (meta carbon is least
    are most electron-rich               electron-poor; ortho/para
    by resonance)                        are most depleted)
              │                                     │
              ↓                                     ↓
   ┌──────────────────────┐              ┌──────────────────────┐
   │  Examples:           │              │  Examples:           │
   │  ─OH, ─OR (strong)   │              │  ─NO₂ (strong)       │
   │  ─NR₂, ─NH₂ (strong) │              │  ─CN, ─CO₂R          │
   │  ─R (alkyl, weak)    │              │  ─COR, ─CHO          │
   │  ─Ph (moderate)      │              │  ─SO₃H, ─NR₃⁺        │
   └──────────────────────┘              └──────────────────────┘

  ┌──────────────────────────────────────────────────────────────────────────────┐
  │  HALOGENS ARE THE EXCEPTION:                                                 │
  │  ─F, ─Cl, ─Br, ─I are DEACTIVATING (withdraw by induction)                 │
  │  but ortho/para DIRECTING (donate lone pairs by resonance at o/p positions) │
  │  → ring is less reactive than benzene, but substitution still goes ortho/para│
  └──────────────────────────────────────────────────────────────────────────────┘

  MECHANISM REMINDER (for any EAS):
  Step 1: E⁺ attacks ring → arenium ion (carbocation, cyclohexadienyl cation)
  Step 2: base removes H⁺ from sp³ carbon → aromaticity restored
  (substitution, NOT addition — aromaticity drives step 2)

The two-step EAS mechanism always sacrifices aromaticity in step 1 and restores it in step 2; the directing effects of any substituent can be predicted by asking where that substituent places the most electron density (for EDGs) or removes it least (for EWGs) in the intermediate arenium ion.

Amino Acid Ionization and Isoelectric Point

╔══════════════════════════════════════════════════════════════════════════════════════╗
║         AMINO ACID SPECIATION AS A FUNCTION OF pH (simple amino acid, e.g. Ala)   ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

  pH:        0 ─────────── pKa1 (~2.3) ─────────── pKa2 (~9.7) ─────────── 14
                                │                         │
                                │                         │
             H₃N⁺─CHR─CO₂H     │   H₃N⁺─CHR─CO₂⁻       │   H₂N─CHR─CO₂⁻
             (fully protonated)  │   (ZWITTERION)          │   (fully deprotonated)
             net charge: +1      │   net charge:  0        │   net charge: −1
                                 │                         │
                              lose H⁺               lose H⁺
                              from ─CO₂H            from ─NH₃⁺

                         ISOELECTRIC POINT (pI):
                         pH at which net charge = 0 (zwitterion dominates)
                         pI = (pKa1 + pKa2) / 2  = (2.3 + 9.7) / 2 = 6.0

  ┌──────────────────────────────────────────────────────────────────────────────┐
  │  For amino acids with ionizable side chains, use the TWO pKa values         │
  │  flanking the zwitterion form to calculate pI:                               │
  │                                                                              │
  │  Asp (side chain ─CO₂H, pKa ~3.9):  pI = (2.1 + 3.9)/2 = ~3.0  (acidic)   │
  │  Lys (side chain ─NH₃⁺, pKa ~10.5): pI = (9.0 + 10.5)/2 = ~9.7 (basic)    │
  │                                                                              │
  │  At pH < pI → net positive charge → migrates toward cathode in electrophoresis│
  │  At pH > pI → net negative charge → migrates toward anode                   │
  └──────────────────────────────────────────────────────────────────────────────┘

Every amino acid exists as a pH-dependent mixture of ionic forms, and the isoelectric point is simply the pH midpoint between the two pKa values that bracket the neutral zwitterion — a concept Skipper can apply directly from acid-base equilibrium work in CHEM102.

Merrifield Solid-Phase Peptide Synthesis: The Assembly Line

╔══════════════════════════════════════════════════════════════════════════════════════╗
║         MERRIFIELD SPPS — BOC STRATEGY (one cycle per amino acid added)            ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

  SOLID SUPPORT: cross-linked polystyrene resin bead
  (insoluble — all intermediates stay on bead; reagents and byproducts wash away)

  ┌─────────────────────────────────────────────────────────────────────────────┐
  │  STEP 1 — ANCHOR first amino acid (C-terminus) to resin                    │
  │                                                                             │
  │  Resin─Cl  +  Boc─AA₁─OH  →  Resin─O─CO─AA₁─NHBoc                       │
  │                                (ester linkage to resin)                    │
  └───────────────────────────────────────┬─────────────────────────────────────┘
                                          │
                                          ↓  REPEAT CYCLE FOR EACH RESIDUE:
  ┌─────────────────────────────────────────────────────────────────────────────┐
  │  STEP 2 — DEPROTECT α-amino group                                          │
  │                                                                             │
  │  Boc group removed by TFA (trifluoroacetic acid) in CH₂Cl₂                │
  │  Boc─NH─ + CF₃CO₂H → H₂N─ + CO₂ + isobutylene                            │
  │  (loss of CO₂ makes deprotection IRREVERSIBLE — thermodynamic driving force)│
  │                                                                             │
  │  WASH resin → remove TFA, byproducts                                       │
  └───────────────────────────────────────┬─────────────────────────────────────┘
                                          │
                                          ↓
  ┌─────────────────────────────────────────────────────────────────────────────┐
  │  STEP 3 — COUPLE next amino acid (Boc-protected, activated)                │
  │                                                                             │
  │  Activating agent (e.g., DCC) converts Boc─AA─OH → reactive ester         │
  │  H₂N─[chain on resin] + Boc─AAₙ─OH  →  Boc─AAₙ─CO─NH─[chain]─resin      │
  │                         ↑                                                  │
  │               N-terminus of new residue now blocked; ready for next cycle  │
  │                                                                             │
  │  WASH resin → remove excess reagents                                       │
  └───────────────────────────────────────┬─────────────────────────────────────┘
                                          │
                          ┌───────────────┘
                          │  REPEAT steps 2–3 for each residue
                          │  (C → N direction, opposite to biosynthesis)
                          ↓
  ┌─────────────────────────────────────────────────────────────────────────────┐
  │  FINAL STEP — CLEAVE from resin + remove all protecting groups              │
  │                                                                             │
  │  HF (in original Merrifield) or TFMSA cleaves resin ester bond             │
  │  → free peptide in solution, C-terminus free, N-terminus free              │
  └─────────────────────────────────────────────────────────────────────────────┘

  ┌──────────────────────────────────────────────────────────────────────┐
  │  WHY IS THIS REVOLUTIONARY? (Merrifield, JACS 1963)                 │
  │  • No isolation of intermediates → no yield loss per step           │
  │  • Excess reagents just wash away — Le Chatelier drives coupling    │
  │  • Automatable — machines now synthesize peptides routinely         │
  │  • Nobel Prize in Chemistry, 1984 (R. Bruce Merrifield)             │
  └──────────────────────────────────────────────────────────────────────┘

Merrifield's key insight — anchoring the growing peptide chain to an insoluble solid support — converted what had been a laborious solution-phase synthesis into a wash-and-repeat cycle that is both automatable and high-yielding across many steps (Merrifield, 1963).

Carbohydrate Structure Progression: From Fischer to Haworth to Chair

╔══════════════════════════════════════════════════════════════════════════════════════╗
║       THREE REPRESENTATIONS OF D-GLUCOSE — THE SAME MOLECULE, THREE VIEWS         ║
╚══════════════════════════════════════════════════════════════════════════════════════╝

  FISCHER PROJECTION               HAWORTH STRUCTURE              CHAIR CONFORMATION
  (linear; shows absolute          (cyclic; shows α vs β;         (most accurate geometry;
   configuration at each chiral C) groups above/below ring)       shows axial vs equatorial)

       CHO
       │
  HO──┤ ← C2 (S in D-glucose? No—R. Check!)
       │            In D-sugars, the highest-
  H───┤ ← C3       numbered chiral center
       │            has ─OH on the RIGHT
  HO──┤ ← C4       in Fischer projection.
       │
  H───┤ ← C5
       │
      CH₂OH

         │  cyclization: C5─OH attacks C1 aldehyde
         ↓  (forms 6-membered pyranose ring)

                OH                        HO    CH₂OH
                │                          \   /
          CH₂OH─C──O                    HO─ ─── ─OH
               / \  \               (each    │       │
              /   \   \           group that  ─────   │
  ─OH ───────     ──────                    is DOWN
  (β: C1─OH        ─OH           in Fischer goes UP
   is UP in         (rest of      in Haworth for RIGHT-
   Haworth,         carbons)      hand carbons; DOWN for
   equatorial                     left-hand ones — the
   in chair)                      "translation rule")

  ┌──────────────────────────────────────────────────────────────────────────────┐
  │  α-D-glucopyranose: C1─OH is AXIAL  (trans to C2─OH)                       │
  │  β-D-glucopyranose: C1─OH is EQUATORIAL (all large groups equatorial)       │
  │                                                                              │
  │  β form is more stable (≈64% at equilibrium) because ALL substituents       │
  │  are equatorial in the ⁴C₁ chair — no 1,3-diaxial strain                   │
  │                                                                              │
  │  ANOMERS: differ only at C1 (anomeric carbon); interconvert via             │
  │  mutarotation (ring opening → reclosure) in aqueous solution                │
  └──────────────────────────────────────────────────────────────────────────────┘

The three representations of glucose encode the same information at different levels of geometric detail — Fischer captures absolute configuration, Haworth captures ring formation and anomeric identity, and the chair conformation reveals why the β-anomer predominates at equilibrium due to fully equatorial substitution.

---

Key Takeaways

  1. Nucleophilic addition vs. nucleophilic acyl substitution depends entirely on whether the tetrahedral intermediate has a viable leaving group. Aldehydes and ketones undergo addition (product is an alcohol; the C=O is destroyed). Acyl derivatives (chlorides, anhydrides, esters, amides) regenerate a new C=O by expelling the leaving group. This is why the carbonyl is "conserved" across acyl substitution — a fact with enormous synthetic consequence (Clayden et al., 2012, ch. 12).
  2. Acyl derivative reactivity follows the leaving-group ability of the attached group: acyl chloride > anhydride > ester > amide > carboxylate. Cl⁻ is a far better leaving group than RO⁻, which is better than RNH₂. This ordering predicts that acyl chlorides react with water spontaneously but amides require acid or base catalysis and heating. The same tetrahedral intermediate is traversed in every case; only the energetics of collapse differ (McMurry, 2016, ch. 21).
  3. Keto-enol tautomerism is an equilibrium, not a resonance. The keto form predominates for most simple aldehydes and ketones (Keq ~10⁻⁸ for acetone), but the enol is the reactive nucleophile in α-halogenation, aldol, and Michael reactions. Under acidic conditions, monohalogenation at the α-position occurs because the product is less enolized than the starting material; under basic conditions, all α-protons are removed successively (haloform reaction) (Clayden et al., 2012, ch. 21).
  4. The aldol condensation is a two-step process: aldol addition (enolate attacks carbonyl, gives β-hydroxy carbonyl) followed by dehydration (elimination of water gives α,β-unsaturated carbonyl). The driving force for dehydration is conjugation of the new C=C with the carbonyl. The term "condensation" specifically refers to the loss of a small molecule (here, water) (McMurry, 2016, ch. 23).
  5. Hückel's rule states that a planar, fully conjugated, monocyclic system is aromatic if it contains 4n+2 π electrons (n = 0, 1, 2, …). Benzene (6 π e⁻, n=1) is aromatic. Cyclobutadiene (4 π e⁻, 4n rule) is antiaromatic — destabilized relative to the open-chain equivalent. Cyclopentadienyl anion (6 π e⁻) is aromatic; the cation (4 π e⁻) is antiaromatic. The rule explains why benzene undergoes substitution rather than addition: addition would destroy aromaticity, costing ~150 kJ/mol of resonance stabilization (Clayden et al., 2012, ch. 21).
  6. In electrophilic aromatic substitution (EAS), the rate-determining step is formation of the arenium ion (Wheland intermediate), not the loss of the proton. The regioselectivity (ortho/para vs. meta) is determined by which position gives the most stable arenium ion. Electron-donating groups stabilize the arenium ion at ortho and para positions (the positive charge is delocalized onto carbons bearing the EDG's lone pair or electrons). Electron-withdrawing groups destabilize the ion most at ortho and para, so meta attack is least unfavorable (Clayden et al., 2012, ch. 22).
  7. Halogens are ortho/para directors but ring deactivators — the apparent paradox resolves by distinguishing induction from resonance. The halogen withdraws electrons inductively through σ bonds (deactivating; rate decreases vs. benzene) but donates a lone pair by resonance into the ring, and this resonance is strongest at ortho and para positions (directing). The two effects operate through different pathways and can point in opposite directions (McMurry, 2016, ch. 16).
  8. All 20 standard amino acids are L-configured at the α-carbon (S configuration in the Cahn-Ingold-Prelog system, with the exception of L-cysteine which is R due to the high priority of the sulfur side chain). The L-designation refers to the Fischer projection convention (─NH₂ on the left, like L-glyceraldehyde), not directly to the R/S system. This sterochemical uniformity in biological amino acids is called homochirality and is a prerequisite for the regular secondary structures of proteins (Clayden et al., 2012, ch. 49).
  9. The peptide bond is planar and has ~40% double-bond character due to resonance delocalization of the nitrogen lone pair into the carbonyl. This was first explained structurally by Pauling and Corey (1951), who showed by X-ray crystallography that the C–N bond is shorter (~1.33 Å) than a typical C–N single bond (~1.47 Å) and longer than a C=N double bond (~1.27 Å). The consequence: rotation about the C–N bond is restricted (barrier ~80 kJ/mol), and the six atoms of each peptide unit are coplanar. The ω dihedral angle is almost always 180° (trans) because the cis arrangement places successive Cα substituents on the same side, creating severe steric clash.
  10. Merrifield's solid-phase peptide synthesis (SPPS) builds peptides from C-terminus to N-terminus, opposite to ribosomal biosynthesis. The C-terminal residue is anchored to the resin first; each subsequent coupling adds to the N-terminus. The Boc strategy uses trifluoroacetic acid (TFA) for α-amine deprotection (the Boc group leaves as CO₂ + isobutylene, making the reaction irreversible) and HF for final cleavage from the resin. The Fmoc strategy (modern alternative) uses piperidine for deprotection and milder conditions (TFA) for cleavage, making it safer and more compatible with acid-sensitive side chains (Merrifield, 1963).
  11. The anomeric carbon (C1 in aldoses, C2 in ketoses) is the former carbonyl carbon, and its configuration defines the α and β anomers. In the α-anomer, the C1─OH is axial (in the ⁴C₁ chair for D-glucose; same side as the ring oxygen in Haworth projection). In the β-anomer, it is equatorial. The two anomers interconvert by mutarotation (ring opening → reclosure through the open-chain aldehyde form) with a measurable change in optical rotation; β-D-glucopyranose predominates at equilibrium (~64%) because all substituents are equatorial in the ⁴C₁ chair (McMurry, 2016, ch. 25).
  12. Glycosidic bonds are acetals (not hemiacetals) and are therefore stable to hydrolysis under neutral and basic conditions but cleaved by aqueous acid. This is directly analogous to acetal chemistry in CHEM202: the hemiacetal (anomeric ─OH free) is in equilibrium with the open-chain form (mutarotation), but once a second ─OR group replaces the ─OH to form the acetal (glycoside), the molecule is locked. Specific glycosidases in biology perform the equivalent of acid-catalyzed hydrolysis with precise stereo- and regiochemical control (Clayden et al., 2012, ch. 49).
  13. Phospholipid bilayers are stabilized by the hydrophobic effect, not by covalent bonds. Each glycerophospholipid has two fatty acid tails (nonpolar) esterified to glycerol at C1 and C2, and a phosphate-linked head group (polar) at C3. In water, the hydrophobic tails self-associate to minimize contact with water (entropy-driven), and the polar heads face the aqueous phase. Unsaturated fatty acids (containing cis double bonds) introduce kinks that reduce packing density and lower the melting temperature of the membrane — the molecular reason why unsaturated fats are liquid at room temperature (McMurry, 2016, ch. 26).
  14. In nucleotides, purines (adenine, guanine — two rings) always pair with pyrimidines (thymine/uracil, cytosine — one ring) via specific hydrogen bonds, with A=T (2 H-bonds) and G≡C (3 H-bonds). The G≡C base pair requires more energy to disrupt, which is why GC-rich regions of DNA have higher melting temperatures. The phosphodiester backbone runs antiparallel (5'→3' of one strand pairs with 3'→5' of the other), and the geometry of this antiparallel arrangement is enforced by the specific pairing geometry of the Watson-Crick face of each base (Clayden et al., 2012, ch. 49).
---

References

  1. Clayden, J., Greeves, N., and Warren, S., Organic Chemistry, 2nd ed., Oxford University Press, Oxford, 2012.
  2. McMurry, J., Organic Chemistry, 9th ed., Cengage Learning, Boston, 2016.
  3. Merrifield, R. B., 'Solid Phase Peptide Synthesis. I. The Synthesis of a Tetrapeptide,' Journal of the American Chemical Society, 1963, 85(14), 2149–2154. DOI: 10.1021/ja00897a025
  4. Pauling, L., Corey, R. B., and Branson, H. R., 'The Structure of Proteins: Two Hydrogen-Bonded Helical Configurations of the Polypeptide Chain,' Proceedings of the National Academy of Sciences, 1951, 37(4), 205–211. DOI: 10.1073/pnas.37.4.205