Undergraduate CHEM201L ⭐ 2 Credits Semester 3

Organic Chemistry I Laboratory

Laboratory course accompanying CHEM201. Develops core organic laboratory techniques: extraction, distillation, recrystallization, chromatography, and IR/NMR spectroscopy. Students synthesize and characterize organic compounds with increasing complexity, maintaining a thorough laboratory notebook.

📅 Studied by Skipper on 2026-10-02

📖 Core Concepts

Claude Opus 5.5

Core Concepts: Organic Chemistry I Laboratory (CHEM201L)

1. What This Subject Is Really About

In CHEM201 you learned to draw arrows: a nucleophile attacks, a leaving group departs, a carbocation rearranges. On paper the product appears as one clean structure on the right side of the arrow. The laboratory replaces that picture with a messier one. When a reaction finishes, the flask holds a mixture: the product, unreacted starting materials, the catalyst, byproducts, solvent, water, and often a small amount of something you never expected. The reaction itself may take an hour. Most of the afternoon goes into separating that mixture and then proving what you have.

So the organic laboratory is about two things:

  1. Separation. You get one compound away from everything else by exploiting a difference in some physical property: solubility, volatility, acidity, or affinity for a surface.
  2. Identification. You confirm what that compound is and how pure it is, using melting points, chromatography, and spectroscopy.

One idea ties nearly every separation technique in this course together:

Almost every separation technique is an equilibrium partition of a solute between two phases, repeated as many times as necessary.
  • Recrystallization partitions a compound between a solid lattice and a solution.
  • Distillation partitions it between a liquid and its vapor.
  • Extraction partitions it between two immiscible liquids.
  • Chromatography partitions it between a stationary solid surface and a moving liquid, thousands of times in succession.

You already have the tools for this from CHEM102. Each of these is an equilibrium with a constant: a solubility, a vapor pressure, a distribution coefficient, an adsorption constant. Separations work because two compounds have different constants. When one equilibration is not selective enough, you repeat it. Fractional distillation, multiple extractions, and column chromatography are all versions of this one strategy: amplify a small difference through repetition.

A note on scale. Our primary laboratory text is built around microscale technique: reactions on tens to hundreds of milligrams, run in conical vials, Craig tubes, and Hickman still heads instead of large round-bottom flasks [Mayo, Pike & Forbes, 2011]. Microscale cuts waste, cost, and exposure. It also raises the stakes for technique, because losing 20 mg is a minor nuisance on a 10 g scale and the whole experiment on a 100 mg scale. Microscale makes careful transfers, careful drying, and careful weighing a matter of survival.


2. Safety, Waste, and the Laboratory Notebook: Epistemology of the Bench

Safety rules and notebook rules can look like bureaucracy that comes before the real chemistry. They are better understood as two forms of one discipline: knowing what you did.

Safety as chemical reasoning

Most laboratory hazards follow from properties you can reason about:

  • Volatility plus flammability. Diethyl ether has a boiling point near 35 °C and a very low flash point. Its vapor is denser than air, so it flows along benchtops toward ignition sources. This is why open flames are banned when ethers are in use.
  • Halogenated solvents. Dichloromethane and chloroform are dense, volatile, and of toxicological concern.
  • Corrosives. Concentrated H2SO4 has a highly exothermic heat of dilution. Hence "add acid to water," which keeps the large heat sink on the receiving side.
  • Lachrymators and toxic electrophiles. Alkyl halides and bromine are electrophiles. The same reactivity that makes them useful SN2 substrates lets them alkylate the nucleophiles in your own proteins and DNA. Your CHEM201 mechanisms are also toxicology.

Check the Safety Data Sheet (SDS) for every reagent before you handle it.

Waste segregation

Halogenated and non-halogenated organic waste go into separate containers. Halogenated waste costs more to dispose of, and incinerating it improperly can generate HCl and other hazardous combustion products. Aqueous waste, heavy metals, and solids each have their own stream. Mixing streams is not just untidy. It can create incompatible mixtures, such as oxidizers with organics.

The notebook as a primary record

Standard practice:

  • Use a bound notebook with numbered pages.
  • Write in permanent ink and date every entry.
  • Record observations at the time you make them, never reconstructed later.
  • Correct errors with a single line through them so they stay legible. Never erase or use correction fluid.

Before the experiment, enter the balanced equation, a table of reagents (molar masses, amounts, mmol, equivalents, density, hazards), and the theoretical yield. During the experiment, record what you actually did and saw: "solution turned pale yellow on addition," "two layers did not separate cleanly; added 1 mL brine."

The deeper principle is this: the notebook should let a stranger reproduce your experiment, including your mistakes. Much of the history of chemistry, including many unexpected discoveries, survives only because someone wrote down an anomaly instead of discarding it.


3. Melting Point: A Thermodynamic Purity Probe

The core idea

A pure crystalline solid melts over a narrow range, typically 0.5–2 °C, at a characteristic temperature. Impurities do two things:

  • Depress the melting point (lower the onset).
  • Broaden the melting range.

You have met the thermodynamics of the depression already: it is the same colligative effect as freezing-point depression from CHEM102. An impurity that dissolves in the liquid phase but is excluded from the crystal raises the entropy of the liquid relative to the solid. This lowers the chemical potential of the liquid, so the solid–liquid equilibrium shifts to a lower temperature. For a dilute impurity:

ΔT_m ≈ K_f · m_impurity

(the cryoscopic relation, valid only for small amounts of impurity
 that is soluble in the melt but insoluble in the crystal)

Why the range broadens: the eutectic picture

Consider a mixture of compound A with a little impurity B, and look at its two-component phase diagram:

  1. As you heat, melting begins at the eutectic temperature. There, a liquid of fixed eutectic composition forms, and it is lower in melting point than either pure component.
  2. The liquid is now richer in B than the bulk solid. As more A melts into it, the liquid composition moves toward pure A.
  3. The temperature therefore has to keep rising until the last crystal of A disappears.

That progression from eutectic onset to final melting is the broad range you observe. Melting is a trajectory across a phase diagram, not a single event.

The mixed melting point

Suppose you think your unknown is benzanilide (literature mp about 163 °C). Grind it with authentic benzanilide and take the melting point of the mixture:

  • If the two are the same compound, the mp is unchanged and the range stays sharp.
  • If they differ, each acts as an impurity in the other, and the mp drops and broadens.

This is an elegant identity test that needs no spectrometer. It turns the "problem" of melting-point depression into a diagnostic tool.

Practical points

  • Use a small, well-packed sample (2–3 mm in a capillary).
  • Heat rapidly to about 15–20 °C below the expected mp, then slowly, at roughly 1–2 °C per minute. Heating faster than heat can conduct into the sample makes the thermometer lead the sample, so you read a falsely high, broad range.
  • Record the range from the first visible liquid to complete liquefaction. "mp 120 °C" is not a complete observation; "mp 121–122.5 °C" is.

4. Recrystallization: Letting the Crystal Lattice Do the Purifying

The core idea

Recrystallization is the most powerful general method for purifying organic solids. It relies on the fact that the solubility of most solids rises steeply with temperature. The procedure:

  1. Dissolve the impure solid in the minimum volume of hot solvent.
  2. Filter away insoluble impurities while hot, if necessary.
  3. Let the solution cool slowly. As the solubility falls, the solution becomes supersaturated in the desired compound, which crystallizes.
  4. Soluble impurities, present at much lower concentration, stay below their saturation limit and remain in the cold solution (the mother liquor).

The purification has a second, molecular layer. A growing crystal is a highly ordered lattice, and incorporating a molecule of the wrong shape is energetically unfavorable. The lattice therefore actively rejects foreign molecules. Picture a jigsaw puzzle being assembled slowly by someone who can see the picture: pieces from a different puzzle simply do not fit. Slow cooling gives molecules time to sample a surface site and leave if they do not fit. Rapid cooling ("crashing out") traps impurities and solvent inside the growing solid. This is the same thermodynamic-versus-kinetic control you met in CHEM201, applied to crystal growth.

Choosing a solvent

An ideal recrystallization solvent:

  1. Dissolves the compound well when hot and poorly when cold.
  2. Either dissolves impurities well at all temperatures, so they stay in the mother liquor, or not at all, so they can be filtered off hot.
  3. Does not react with the compound.
  4. Has a boiling point below the compound's melting point. Otherwise the compound may "oil out," separating as a liquid droplet that solidifies into an impure glass.
  5. Is volatile enough to remove from the crystals easily.

"Like dissolves like" is the starting heuristic. If no single solvent works, use a mixed-solvent pair such as ethanol/water or ethyl acetate/hexanes:

  1. Dissolve the compound in a minimum of the hot "good" solvent.
  2. Add the hot "poor" solvent dropwise until the solution just turns cloudy (saturation).
  3. Add a drop of the good solvent to clarify the solution, then cool.

Techniques worth understanding, not just memorizing

  • Hot (gravity) filtration removes insoluble impurities or decolorizing charcoal. It is done hot, with fluted filter paper and a pre-warmed funnel, because cooling during filtration would deposit product in the funnel.
  • Decolorizing carbon has an enormous surface area that adsorbs large, conjugated, colored impurities. Add it to a slightly cooled solution. Adding it to a boiling solution causes violent bumping, because its surface provides abundant nucleation sites for bubbles.
  • Inducing crystallization. Supersaturated solutions can be kinetically stuck. Scratching the glass, which creates microscopic nucleation sites, or adding a seed crystal lowers the barrier to nucleation.
  • Vacuum filtration (Büchner or Hirsch funnel) isolates the crystals. Wash them with a small amount of ice-cold solvent so you remove mother liquor without redissolving product.
  • Microscale versions. Very small samples are handled in a Craig tube: an inner plug sits in an outer tube, and centrifugation separates crystals from mother liquor [Mayo, Pike & Forbes, 2011].

The unavoidable trade-off

Some product always stays dissolved in the cold mother liquor, because its solubility is never zero. Recrystallization therefore always trades yield for purity. Excess solvent lowers yield without improving purity. Hence the emphasis on the minimum hot solvent.


5. Distillation: Separating by Volatility

Vapor pressure and boiling

A liquid boils when its vapor pressure equals the external pressure. From CHEM102, the temperature dependence of vapor pressure follows the Clausius–Clapeyron equation:

ln(P₂ / P₁) = −(ΔH_vap / R) · (1/T₂ − 1/T₁)

Raoult's Law and why distillation works at all

For an ideal solution of two volatile liquids A and B, each component contributes a partial pressure proportional to its mole fraction in the liquid:

Raoult's Law:      P_A = x_A · P°_A        P_B = x_B · P°_B
Dalton's Law:      P_total = P_A + P_B

Vapor composition: y_A = P_A / P_total = x_A·P°_A / (x_A·P°_A + x_B·P°_B)

where x = mole fraction in liquid, y = mole fraction in vapor,
      P° = vapor pressure of the pure component at that temperature

Here is the key insight. If A is more volatile (P°A > P°B), then yA > xA: the vapor is enriched in the more volatile component relative to the liquid it came from. Condense that vapor, and you have a liquid richer in A than the pot. That is one equilibrium stage.

Simple versus fractional distillation

Simple distillation performs essentially one vaporization–condensation cycle. It works well when:

  • the boiling points differ by more than roughly 50–75 °C, or
  • you are separating a volatile liquid from a non-volatile solid or residue.

For closer-boiling mixtures, one enrichment step is not enough. A fractionating column, packed with material of high surface area, lets vapor condense and re-vaporize many times as it rises. Each cycle is an equilibrium stage, called a theoretical plate, and each one enriches the vapor further in the more volatile component. A column with many theoretical plates can separate liquids whose boiling points differ by only a few degrees. The cost is time and material held up in the column ("holdup").

Keep the theoretical-plate concept in mind. Chromatography borrowed it directly (Section 8), and the same mathematics of repeated equilibria describes both.

Azeotropes: when Raoult's Law fails

Real solutions deviate from Raoult's Law when A–B intermolecular interactions differ from A–A and B–B interactions. Strong deviations produce azeotropes: mixtures whose vapor has the same composition as the liquid, so no further enrichment by distillation is possible. The classic example is ethanol–water, a minimum-boiling azeotrope at about 95.6% ethanol by mass. However good your column, you cannot distill past it. Azeotropes can also be exploited. Removing water as a toluene–water azeotrope in a Dean–Stark trap is a standard way to drive esterifications forward (Section 11).

Vacuum distillation

Many high-molecular-weight organic compounds decompose before reaching their atmospheric boiling points. Lowering the external pressure lowers the boiling point, as the Clausius–Clapeyron equation predicts. A useful rough rule near atmospheric pressure is that halving the pressure lowers the boiling point by about 10 °C. Pressure–temperature nomographs (based on Trouton's-rule-type approximations) estimate the boiling point at reduced pressure. Practical requirements:

  • Use thick-walled glassware rated for vacuum.
  • Use a stir bar or a fine capillary bleed to prevent bumping. Boiling chips work poorly under vacuum, because their trapped air is quickly removed.
  • Use a trap to protect the pump.

Reading the thermometer correctly

The thermometer bulb belongs just below the side-arm, where it is bathed in vapor that is about to condense. What you measure is the temperature of vapor in equilibrium with condensate, which is the boiling point of the distilling fraction. You are not measuring the temperature of the pot, which is higher.


6. Liquid–Liquid Extraction: Partitioning and the Power of Acid–Base Chemistry

The distribution coefficient

When a solute is shaken with two immiscible solvents, such as water and diethyl ether, it distributes between them. At equilibrium the ratio of concentrations is constant at a given temperature:

K_D = C_organic / C_aqueous     (the distribution or partition coefficient)

This is just an equilibrium constant, with exactly the logic of CHEM102.

Why several small extractions beat one large one

This is one of the most counterintuitive and most useful results in the course. Suppose a solute sits in a volume Vaq of water and you extract it with organic solvent. The fraction left in the aqueous phase after one extraction with volume Vorg is:

q = V_aq / (V_aq + K_D · V_org)

After n successive extractions, each with V_org:
    fraction remaining = qⁿ

Worked example. Take KD = 4 and Vaq = 10 mL, with 30 mL of organic solvent available.

  • One 30 mL extraction: q = 10 / (10 + 4·30) = 10/130 ≈ 0.077. You recover about 92.3%.
  • Three 10 mL extractions: q = 10 / (10 + 4·10) = 0.20, and q³ = 0.008. You recover about 99.2%.

The same solvent split into portions leaves roughly ten times less product behind. The reason is that the fraction remaining is geometric in n but only hyperbolic in Vorg. Repetition wins, which is the unifying theme again.

Acid–base extraction: switching solubility on and off

A neutral organic acid (RCOOH) or base (RNH2) dissolves in organic solvents. Its ionized form (RCOO− Na+ or RNH3+ Cl−) is a salt and dissolves in water. By controlling pH you can move a compound between layers at will. The Henderson–Hasselbalch equation from CHEM102 is the quantitative guide:

pH = pKa + log([A⁻] / [HA])

At pH = pKa + 2:  [A⁻]/[HA] = 100   → ~99% ionized (aqueous-soluble)
At pH = pKa − 2:  [A⁻]/[HA] = 0.01  → ~99% neutral (organic-soluble)

This logic lets you separate a mixture of a carboxylic acid, a phenol, an amine, and a neutral compound dissolved in ether:

  1. Extract with dilute HCl. The amine (conjugate-acid pKa around 10–11) is protonated to RNH3+ and moves into water.
  2. Extract with aqueous NaHCO3. Bicarbonate is a weak base; the pKa of its conjugate acid, H2CO3, is about 6.4. It is strong enough to deprotonate a carboxylic acid (pKa about 4–5, e.g., benzoic acid about 4.2) but not a typical phenol (pKa about 10). The carboxylate moves to water.
  3. Extract with aqueous NaOH. Hydroxide deprotonates the phenol, and the phenoxide moves to water.
  4. What remains in ether is the neutral compound.

To recover each separated compound, re-acidify (or re-basify) its aqueous layer. The neutral form precipitates or can be back-extracted into fresh organic solvent.

The selectivity of NaHCO3 versus NaOH is a direct application of comparing pKa values across an equilibrium, exactly as you did in CHEM201 when predicting acid–base equilibria. Also note that bicarbonate neutralization releases CO2, so vent the separatory funnel frequently.

Practical points

  • Which layer is which? Density decides, not "organic is always on top." Ether (about 0.71 g/mL) and ethyl acetate float on water. Dichloromethane (about 1.33 g/mL) and chloroform sink. When in doubt, add a few drops of water and watch which layer they join. Never discard any layer until the product is in hand.
  • Emulsions can be broken with brine, which raises the ionic strength of the aqueous layer, with gentle swirling, or with time.
  • Brine washes also pre-dry the organic layer: the very salty aqueous phase pulls dissolved water out of the organic layer osmotically.
  • Drying agents (anhydrous Na2SO4, MgSO4) remove the remaining water by forming hydrates. The solution is dry when freshly added agent flows freely like sand instead of clumping.
  • Microscale. Extractions are often done in conical vials, with layers withdrawn by Pasteur pipet [Mayo, Pike & Forbes, 2011].

7. Thin-Layer Chromatography: Fast Information About Mixtures

The core idea

A TLC plate is a thin layer of adsorbent, usually silica gel, on glass, aluminum, or plastic. The procedure:

  1. Spot a tiny amount of sample near the bottom of the plate.
  2. Stand the plate in a shallow pool of solvent (the eluent, or mobile phase) inside a closed chamber.
  3. Capillary action draws the solvent up the plate.

Each compound continuously partitions between being adsorbed on the stationary silica and dissolved in the moving solvent.

Silica gel (SiO2·xH2O) is covered with polar, weakly acidic silanol (Si–OH) groups. These hydrogen-bond to and dipole-interact with polar molecules. The consequences:

  • Polar compounds (alcohols, carboxylic acids, amines) adsorb strongly, spend more time stationary, and travel less far.
  • Nonpolar compounds (hydrocarbons, alkyl halides) barely interact, stay mostly in the solvent, and travel farther.
R_f = (distance traveled by compound) / (distance traveled by solvent front)

0 ≤ R_f ≤ 1  (measured from the origin, i.e., the baseline where spots were applied)

Controlling Rf with eluent polarity

A more polar eluent competes more effectively with the analyte for silica's binding sites, displacing it and increasing Rf for everything. Solvents are ranked in an eluotropic series, roughly:

hexane < toluene < dichloromethane < diethyl ether < ethyl acetate < acetone < ethanol < methanol < acetic acid

Mixtures such as hexanes/ethyl acetate allow continuous tuning. A useful separation puts the spots of interest in the Rf range of roughly 0.2–0.6.

Visualization

Most organic compounds are colorless, so you have to make the spots visible:

  • UV light (254 nm). Many plates contain a fluorescent indicator ("F254"). Compounds that absorb UV, especially aromatic or conjugated ones, quench the fluorescence and appear as dark spots on a glowing green background. This method is non-destructive.
  • Iodine chamber. I2 vapor reversibly complexes with many organic compounds, especially unsaturated ones, giving brown spots.
  • Chemical stains. KMnO4 reveals oxidizable groups (alkenes, alcohols) as yellow spots on purple. p-Anisaldehyde and ceric stains give colored spots for many functional groups. Ninhydrin reacts with primary amines and amino acids to give a deep purple product (Ruhemann's purple). Remember that one.

What TLC is actually for

  • Monitoring reactions. Has the starting material disappeared? Has a new spot appeared?
  • Assessing purity. One spot is consistent with purity; it does not prove it.
  • Choosing conditions for column chromatography.
  • Tentative identification by co-spotting. Run the unknown, an authentic standard, and a mixed spot of both side by side on the same plate. Rf values are not transferable constants. They depend on plate activity, humidity, chamber saturation, temperature, and eluent composition. Only side-by-side comparison on the same plate is meaningful.

8. Column Chromatography: TLC Scaled Up for Purification

The core idea

Column chromatography uses the same physics as TLC, run vertically with enough adsorbent to separate preparative quantities:

  1. Pack a glass column with silica gel or alumina.
  2. Load the mixture as a concentrated band at the top.
  3. Pass eluent through the column, by gravity in gravity chromatography or with gentle air pressure in flash chromatography.
  4. Compounds move down at different rates and emerge separately at the bottom.
  5. Collect the eluent in sequential fractions and analyze each by TLC. Combine the pure fractions and evaporate the solvent.

The beautiful historical connection

In 1941, A. J. P. Martin and R. L. M. Synge developed partition chromatography and introduced plate theory to describe it. They explicitly borrowed the concept of the theoretical plate from fractional distillation [Martin & Synge, 1941]. A chromatography column behaves like a distillation column with a very large number of equilibration stages. A small difference in partitioning per stage, compounded over thousands of stages, becomes a large difference in elution time. Martin and Synge shared the 1952 Nobel Prize in Chemistry for this work. The system they were trying to separate was a mixture of acetylated amino acids, which we will return to below.

Choosing conditions

  • Stationary phase. Silica gel is standard. Alumina (available in acidic, neutral, or basic grades) can be better for acid-sensitive compounds or amines. Silica's acidity can cause amines to "streak," a problem often fixed by adding a little triethylamine to the eluent.
  • Mobile phase. Choose a solvent system that gives the target compound an Rf of about 0.2–0.35 on TLC, well separated from impurities. Starting with a less polar eluent and increasing polarity during the run (a step or gradient elution) elutes nonpolar compounds first and then pushes polar compounds off.
  • Packing and loading. The column must be uniform and free of air bubbles and cracks, which create channels that ruin separation. Load the sample in a minimum volume as a narrow band, because a broad starting band cannot become a narrow ending band. Never let the solvent level drop below the top of the adsorbent.

9. Infrared Spectroscopy: Listening to Bonds Vibrate

The physical picture

Covalent bonds behave like springs connecting masses. They stretch and bend at characteristic frequencies. When the frequency of infrared light matches a vibrational frequency, and the vibration changes the molecule's dipole moment, the molecule absorbs that light. An IR spectrum plots percent transmittance against wavenumber (cm−1, proportional to frequency and energy), typically from 4000 to 400 cm−1.

The harmonic oscillator model (Hooke's Law) gives remarkable predictive power:

ν̄ = (1 / 2πc) · √(k / μ)

where ν̄ = wavenumber (cm⁻¹), c = speed of light,
      k = force constant (bond stiffness),
      μ = reduced mass = (m₁·m₂)/(m₁ + m₂)

Pavia et al. give the practical form:
      ν̄ ≈ 4.12 √(K / μ)    with K in dyn/cm and μ in amu

[Pavia, Lampman, Kriz & Vyvyan, 2015]

What the equation predicts

  • Stiffer bonds vibrate at higher frequency. Bond order tracks stiffness: C≡C (about 2150 cm−1) > C=C (about 1650) > C–C (about 1200).
  • Lighter atoms vibrate at higher frequency. Bonds to hydrogen (C–H, O–H, N–H) appear in the 2850–3650 cm−1 region because hydrogen's small mass makes μ small. Replacing H with D shifts C–H from about 3000 to about 2200 cm−1, close to the factor of √2 the model predicts.
  • Hybridization matters. More s-character makes a bond shorter and stiffer. This gives one of the most useful dividing lines in IR: C–H stretches above 3000 cm−1 mean sp2 or sp carbons (alkenes, aromatics, about 3300 for terminal alkyne C–H), and stretches just below 3000 cm−1 mean sp3 carbons.

Key diagnostic absorptions

O–H (alcohol, H-bonded)     ~3200–3550   strong, broad, rounded
O–H (carboxylic acid)       ~2500–3300   very broad, overlapping C–H
N–H (amine/amide)           ~3300–3500   1° amine: two bands; 2°: one band
C–H (sp)                    ~3300        sharp
C–H (sp²)                   ~3000–3100
C–H (sp³)                   ~2850–3000
C–H (aldehyde)              ~2720 and ~2820 (a pair; Fermi resonance)
C≡N                         ~2250        medium, sharp
C≡C                         ~2100–2260   weak (or absent if symmetric)
C=O (ester)                 ~1735–1750
C=O (aldehyde)              ~1725
C=O (ketone)                ~1715
C=O (carboxylic acid)       ~1710
C=O (amide)                 ~1630–1690
C=C (alkene)                ~1620–1680   variable
C=C (aromatic)              ~1450–1600   several bands
C–O (alcohol, ester, ether) ~1000–1300   strong

[Pavia, Lampman, Kriz & Vyvyan, 2015]

The carbonyl as a reporter of electronics

The C=O stretch is intense, because the large bond dipole changes strongly during the vibration, and its exact position encodes the electronic environment. In an amide, nitrogen's lone pair donates into the carbonyl by resonance. This gives the C=O bond partial single-bond character, a smaller force constant, and a lower frequency (about 1650 cm−1). In an ester, oxygen's resonance donation is weaker and its inductive withdrawal stronger, so the C=O stays stiffer and higher (about 1740). Conjugation with a C=C or aromatic ring lowers the C=O frequency by roughly 20–30 cm−1. The resonance structures you drew in CHEM201 are physically measurable here.

Interpretation strategy

Do not try to assign every peak. Pavia et al. recommend a disciplined approach: check the key regions first [Pavia, Lampman, Kriz & Vyvyan, 2015].

  1. Is there a C=O (about 1650–1800)?
  2. Is there an O–H or N–H (above 3200)?
  3. Is there C–H above 3000?
  4. Are there triple bonds (about 2100–2260)?

The fingerprint region (below about 1500 cm−1) contains complex coupled vibrations unique to each molecule. It is excellent for matching an unknown against a reference spectrum but poor for de novo assignment.

In the lab, IR is especially powerful for following a reaction. Consider a Fischer esterification: the broad acid O–H (2500–3300) should vanish, and the C=O should shift from about 1710 to about 1740. A product spectrum showing both is evidence of incomplete reaction or poor workup.


10. Introduction to 1H NMR: Mapping the Hydrogen Environment

The physical picture

Protons have nuclear spin (I = ½). In a strong magnetic field B0, they occupy two spin states separated by a small energy that is proportional to the local field each nucleus experiences. Radiofrequency radiation at the resonance frequency flips spins, and the signal is detected.

The chemistry enters through shielding. Electrons around a nucleus circulate in the applied field and generate a small opposing field. Two cases follow:

  • Electron-rich (shielded) protons feel a slightly weaker net field and resonate at lower frequency, or "upfield."
  • Electron-poor (deshielded) protons, for example those near electronegative atoms, resonate at higher frequency, or "downfield."

The chemical shift

Resonance frequencies scale with the field strength of the instrument. To make spectra comparable across instruments, we report a dimensionless chemical shift relative to tetramethylsilane (TMS):

δ (ppm) = [ (ν_sample − ν_TMS) / ν_spectrometer ] × 10⁶

TMS, Si(CH₃)₄, defines δ = 0.00:
  • 12 equivalent protons → one strong singlet
  • Si is less electronegative than C → the protons are highly shielded,
    so nearly all organic protons appear downfield of TMS
  • chemically inert, volatile (bp ~27 °C), easy to remove

[Pavia, Lampman, Kriz & Vyvyan, 2015]

Approximate 1H chemical shift ranges

Alkyl C–H (R–CH₃, R–CH₂–R)          ~0.9–1.5
Allylic, α to C=O (CH₃–C=O)         ~2.0–2.6
Benzylic (Ar–CH₃)                   ~2.2–2.5
Terminal alkyne C≡C–H               ~1.7–3.1
C–H next to N                       ~2.2–2.9
C–H next to halogen (CH–Br, CH–Cl)  ~3.0–4.0
C–H next to O (CH–OR, CH–OC(=O)R)   ~3.3–4.5
Vinyl C=C–H                         ~4.5–6.5
Aromatic Ar–H                       ~6.5–8.0
Aldehyde CHO                        ~9.5–10.5
Carboxylic acid COOH                ~10–13 (broad)
Alcohol/amine O–H, N–H              variable, ~0.5–5 (broad; exchangeable)

A surprising feature: aromatic and aldehyde protons appear farther downfield than electronegativity alone would predict. Circulation of the π electrons sets up an induced ring current (in aromatics) or a local anisotropic field (in C=O and C=C). These reinforce the applied field at the positions where those protons sit. The aromaticity you learned about as a stability concept in CHEM201 is a magnetic phenomenon you can see.

The four kinds of information in a 1H NMR spectrum

  1. Number of signals gives the number of chemically distinct proton environments, which reflects the molecule's symmetry.
  2. Chemical shift gives the electronic environment of each set.
  3. Integration (area under each signal) gives the relative number of protons in each set. The output is a ratio, not an absolute count.
  4. Splitting (multiplicity) gives the number of neighboring protons. By the n + 1 rule, a proton with n equivalent neighbors on adjacent carbons appears as n + 1 lines with binomial (Pascal's triangle) intensities. The spacing between lines is the coupling constant J, in Hz.
n + 1 rule (first-order spectra, equivalent neighbors):

  n neighbors   pattern     intensity ratio
      0         singlet     1
      1         doublet     1:1
      2         triplet     1:2:1
      3         quartet     1:3:3:1
      4         quintet     1:4:6:4:1

Example: ethyl acetate, CH₃–C(=O)–O–CH₂–CH₃
  δ ~2.0  singlet  3H   (acetyl CH₃; no neighbors)
  δ ~4.1  quartet  2H   (O–CH₂; 3 neighbors, deshielded by O)
  δ ~1.2  triplet  3H   (CH₃; 2 neighbors)

Why does splitting happen? Each neighboring proton's spin is either aligned with or against B0, so it slightly raises or lowers the field felt by the observed proton. With n neighbors there are n + 1 distinct total spin combinations. Their statistical weights follow binomial coefficients, which is the same counting you used for coin flips in genetics (BIOL102).

Important subtleties:

  • Equivalent protons do not split each other. The three H's of a CH3 group do not split one another.
  • OH and NH protons often appear as broad singlets that do not couple, because rapid exchange (catalyzed by traces of acid or water) averages their spin states.
  • The D2O shake. Adding a drop of D2O makes exchangeable O–H and N–H signals disappear, which identifies them unambiguously.

11. Synthesis Experiments: Mechanisms Meet the Bench

The synthesis experiments put everything together. Each one involves a CHEM201 mechanism, a workup built from the separation techniques above, and a characterization using mp, TLC, IR, and NMR.

11a. Fischer Esterification: Winning an Unfavorable Equilibrium

           H₂SO₄ (cat.)
R–COOH + R'–OH  ⇌  R–COOR' + H₂O

K_eq is modest (on the order of ~4 for simple primary alcohols + acetic acid)

Mechanism (acid-catalyzed nucleophilic acyl substitution), often remembered by the mnemonic PADPED:

  1. Protonate the carbonyl oxygen. This makes the carbonyl carbon much more electrophilic.
  2. Add the alcohol (nucleophile) to the carbonyl carbon, forming a tetrahedral intermediate.
  3. Deprotonate the oxonium ion.
  4. Protonate one of the –OH groups, converting it to a good leaving group, H2O.
  5. Eliminate water, reforming the C=O.
  6. Deprotonate to give the neutral ester and regenerate H+.

A beautiful piece of evidence. When the reaction is run with alcohol labeled with 18O, the label ends up in the ester, not in the water. The C–O bond that breaks is therefore the acid's acyl–OH bond, not the alcohol's C–O bond. Isotopic labeling settled a mechanistic question that no amount of arrow-drawing could.

Driving the equilibrium with Le Chatelier's principle. Because Keq is near unity, a 1:1 mixture gives incomplete conversion. You can shift the equilibrium by:

  • using a large excess of the cheaper reagent, often the alcohol or the acid, or
  • removing water as it forms, with a Dean–Stark trap and a water azeotrope, or with molecular sieves.

This is equilibrium thermodynamics from CHEM102 used as a synthetic strategy.

Workup. The standard workup is pure acid–base extraction logic:

  1. Wash with water to remove excess alcohol and H2SO4.
  2. Wash with NaHCO3 to deprotonate and remove the unreacted carboxylic acid (vent for CO2).
  3. Wash with brine, then dry.

Purify by distillation, and confirm by IR (loss of the broad O–H, C=O near 1740) and NMR (for example, the O–CH2 signal near δ 4.1). The classic example is isopentyl acetate, which has a striking banana odor.

11b. SN2 Reactions: Concerted Backside Attack

Nu:⁻ + R–X  →  [Nu···C···X]‡  →  Nu–R + X:⁻

Rate = k [R–X][Nu]     (second order overall; concerted, one step)

The nucleophile attacks the carbon from the side opposite the leaving group, through a trigonal-bipyramidal transition state, and the configuration inverts (Walden inversion). Reactivity follows:

  • Substrate: methyl > primary > secondary ≫ tertiary (unreactive). Steric hindrance blocks backside approach.
  • Leaving group: I− > Br− > Cl− ≫ F−. Weaker conjugate bases are better leaving groups.
  • Solvent: polar aprotic solvents (acetone, DMSO, DMF) accelerate SN2. They solvate cations well but leave anionic nucleophiles "naked" and reactive.

A classic laboratory demonstration uses NaI in acetone. NaI is soluble in acetone, but NaCl and NaBr are not. As iodide displaces chloride or bromide, the sodium salt precipitates, which both signals the reaction and drives it forward (Le Chatelier again, as in the Finkelstein reaction). Comparing precipitation rates across primary, secondary, and tertiary halides makes SN2 substrate trends visible within minutes. The complementary test, AgNO3 in ethanol, favors SN1 via carbocation formation and reverses the reactivity order.

Preparing an alkyl halide from an alcohol (for example, 1-bromobutane from 1-butanol with NaBr and H2SO4) is also SN2. Acid converts the poor leaving group –OH into the good leaving group –OH2+, and bromide then displaces water from the primary carbon. The workup removes byproducts by extraction: the alcohol and the dibutyl ether formed by a competing pathway.

11c. Addition Reactions: Stereochemistry You Can Weigh

The bromination of alkenes is the model case. Br2, or a safer solid source such as pyridinium tribromide, adds across the C=C:

  1. The π bond attacks Br2, forming a cyclic bromonium ion.
  2. Bromide opens the bromonium ion from the opposite face.

The result is anti addition.

The stereochemical consequence is something you can measure with a melting point apparatus:

  • trans-Stilbene plus Br2 (anti) gives meso-1,2-dibromo-1,2-diphenylethane.
  • cis-Stilbene plus Br2 (anti) gives the racemic (±) pair.

These are diastereomers, so they have different physical properties. The meso compound packs into a crystal far more efficiently and melts more than 100 °C higher than the racemate. A melting point therefore tells you which diastereomer formed, and so it provides evidence for the anti mechanism. Abstract stereochemistry becomes a number you can read off a thermometer.

Other additions encountered in this course, such as acid-catalyzed hydration and hydroboration–oxidation, test your grasp of regiochemistry (Markovnikov versus anti-Markovnikov) and carbocation stability. Your product analysis (NMR splitting patterns, IR O–H) tells you which regiochemistry actually occurred.


12. Connections to Peptide Chemistry

It may seem a long way from banana oil and stilbene dibromide to proteins, but almost every technique in this course reappears, scaled and refined, in peptide chemistry.

Esterification, distillation, and the birth of peptide chemistry

Emil Fischer, whose name is on the esterification you run (developed with Arthur Speier, [Fischer & Speier, 1895]), was also a founder of peptide chemistry. He coined the term "peptide" and synthesized the dipeptide glycylglycine in 1901. To separate the amino acids released by hydrolyzing proteins, he converted them to their esters and separated those by fractional distillation. Two techniques from this course were, at the start of the twentieth century, central tools for analyzing proteins. Today, amino acid methyl and ethyl esters (often prepared with SOCl2 in methanol, a close mechanistic cousin of Fischer esterification) are standard building blocks with their C-terminus "protected." Protecting one functional group so another can react selectively is the strategic core of peptide synthesis.

Acid–base behavior: the zwitterion

Amino acids contain both a carboxylic acid (pKa about 2) and an ammonium group (pKa about 9–10). Apply the Henderson–Hasselbalch reasoning from Section 6:

  • At neutral pH, both groups are ionized. The molecule is a zwitterion (+H3N–CHR–COO−).
  • This is why amino acids are high-melting, water-soluble solids that are nearly insoluble in ether, and why they cannot be extracted like ordinary organic acids.
  • Their solubility is lowest at the isoelectric point, which is exploited to precipitate and recrystallize them. Protein chemists use the same principle when they precipitate proteins by adjusting pH.

Chromatography: from Martin and Synge to HPLC

Partition chromatography was invented specifically to separate amino acid derivatives [Martin & Synge, 1941]. Paper chromatography of amino acids, visualized with ninhydrin, the same stain you may use on TLC plates, followed soon after and became a key tool in early protein sequencing. Modern peptide purification relies on reversed-phase HPLC. It is column chromatography with the polarity logic inverted: a nonpolar C18-bonded silica stationary phase, a polar water/acetonitrile mobile phase, high pressure, and tiny particles that provide tens of thousands of theoretical plates. If you understand why a polar compound has a low Rf on silica, you can reason about why a hydrophobic peptide elutes late on C18.

Solid-phase peptide synthesis: making purification trivial

Building a 30-residue peptide in solution would require purifying the product after every coupling step, perhaps sixty extractions and recrystallizations, with losses each time. R. Bruce Merrifield's solution was to anchor the growing chain to an insoluble polymer bead [Merrifield, 1963]. Each "purification" then becomes a simple filtration and wash: excess reagents are rinsed away while the product stays on the resin. This is the phase-partition idea taken to its extreme. If the product is permanently in a different phase from everything else, separation is effortless. Merrifield received the 1984 Nobel Prize in Chemistry. In the original chemistry, the first amino acid was attached to chloromethylated polystyrene by carboxylate displacement of a benzylic chloride, which is an SN2 reaction.

Spectroscopy of the peptide bond

  • IR. The amide C=O stretch (amide I, about 1650 cm−1) sits low for the resonance reasons described in Section 9. The amide II band (about 1550 cm−1, N–H bending coupled with C–N stretching) accompanies it. The exact amide I frequency is sensitive to hydrogen bonding, so protein IR spectra can distinguish α-helix from β-sheet content.
  • NMR. Amide N–H protons appear at about δ 7–9, and α-protons appear at about δ 4–4.5, deshielded by both N and C=O. Multidimensional NMR, built on the same principles of shift, coupling, and exchange, is used to determine full three-dimensional protein structures in solution. The D2O exchange experiment becomes hydrogen–deuterium exchange, which reports on which amide NH groups are protected inside folded structure.

Electrophiles and nucleophiles in biology

The reactivity patterns of this course reappear in protein modification. In proteomics, cysteine thiols are routinely "capped" with iodoacetamide, an SN2 alkylation. Many protein bioconjugation methods use conjugate addition of a cysteine thiol to a maleimide, a cousin of the alkene additions here. When you study enzyme mechanisms later, you will recognize nucleophilic acyl substitution, the mechanism of Fischer esterification, as the chemistry of proteases and of peptide bond formation on the ribosome.


13. Common Misconceptions to Watch Out For

  1. "A sharp melting point proves my compound is pure and correct." A sharp mp is consistent with purity, but a eutectic mixture also melts sharply, and a pure wrong compound melts sharply too. Use a mixed melting point or spectroscopy for identity.
  2. "Adding extra solvent during recrystallization is the safe choice." Excess solvent keeps more product dissolved in the cold mother liquor and lowers recovery without improving purity. Use the minimum amount of hot solvent.
  3. "Faster cooling gives more crystals, faster." Rapid cooling traps impurities and solvent in the lattice. Slow cooling yields purer, better-formed crystals. Purity comes from giving the lattice time to reject misfits.
  4. "The distillation thermometer reads the temperature of the boiling liquid." It reads the temperature of the vapor reaching the condenser, which is the boiling point of what is distilling. The pot is hotter. A bulb placed too high reads falsely low.
  5. "Fractional distillation can separate any two liquids." Not past an azeotrope. At the azeotropic composition, vapor and liquid have identical compositions and no plate count helps.
  6. "The organic layer is always on top." Layer order depends on density. Dichloromethane and chloroform sink below water. Test with a drop of water, and never discard a layer until your product is secured.
  7. "One big extraction is just as good as several small ones with the same total volume." The fraction remaining decreases geometrically with the number of extractions, so multiple small portions are much more efficient (Section 6).
  8. "NaOH and NaHCO3 are interchangeable 'base washes.'" Bicarbonate deprotonates carboxylic acids but not most phenols. NaOH deprotonates both. NaOH can also hydrolyze (saponify) your ester product. Choose the base by comparing pKa values.
  9. "Polar compounds move farther on silica TLC." The reverse is true. Polar compounds bind to polar silica and have low Rf. Increasing eluent polarity raises Rf for all compounds.
  10. "Rf is a fixed physical constant, like a melting point." Rf depends on plate, eluent, humidity, temperature, and chamber saturation. Compare compounds only on the same plate, ideally with a co-spot.
  11. "One spot on TLC means the compound is pure." Two compounds can co-elute in a given solvent, and some compounds are invisible to a given visualization method. Try a different eluent or stain before concluding.
  12. "Every IR peak must be assigned." Focus on diagnostic regions: C=O, O–H/N–H, C–H above or below 3000, and triple bonds. The fingerprint region is for matching, not for de novo assignment. The absence of a peak, such as no C=O, is often as informative as its presence.
  13. "In NMR, a CH3 group's three H's split each other into a triplet." Chemically equivalent protons do not split one another. Splitting comes from non-equivalent neighbors, usually on adjacent carbons.
  14. "Integration tells me the exact number of hydrogens." Integration gives ratios. A 1:1.5 ratio could be 2H:3H or 4H:6H. Use the molecular formula or other data to scale it.
  15. "OH protons always appear in the same place and split their neighbors." OH and NH shifts vary with concentration, solvent, and temperature, and exchange usually erases their coupling. Use a D2O shake to confirm them.
  16. "A yield over 100% means a great reaction." It means your product is still wet with solvent or water, or contaminated. Mass is not purity. Dry to constant mass and characterize.
  17. "Fischer esterification goes to completion once it's heated long enough." It is an equilibrium with K near unity. Time only brings you to equilibrium. To go beyond it, use excess reagent or remove water.
  18. "Boiling chips can be added whenever the liquid starts bumping." Adding boiling chips to a superheated liquid can trigger violent eruption. Add them, or a stir bar, before heating. If you forgot, cool the liquid first.
  19. "Safety and notebook rules are separate from the chemistry." Both follow from chemical properties and from the need to know exactly what happened. An unrecorded observation is lost data, and an unexplained anomaly is sometimes the most important result of the day.

References

  • Mayo, D. W.; Pike, R. M.; Forbes, D. C. Microscale Organic Laboratory with Multistep and Multiscale Syntheses, 5th ed.; Wiley, 2011.
  • Pavia, D. L.; Lampman, G. M.; Kriz, G. S.; Vyvyan, J. R. Introduction to Spectroscopy, 5th ed.; Cengage Learning, 2015.
  • Fischer, E.; Speier, A. "Darstellung der Ester." Berichte der deutschen chemischen Gesellschaft 1895, 28, 3252–3258. (Historical; not assigned.)
  • Martin, A. J. P.; Synge, R. L. M. "A new form of chromatogram employing two liquid phases." Biochemical Journal 1941, 35, 1358–1368. (Historical; not assigned.)
  • Merrifield, R. B. "Solid Phase Peptide Synthesis. I. The Synthesis of a Tetrapeptide." Journal of the American Chemical Society 1963, 85, 2149–2154. (Historical; not assigned.)

⚙️ Mechanisms & Applications

GPT-6 Astra

Mechanisms & Applications: Learning to Make Molecules—and to Know What We Made

Skipper, the central challenge of organic laboratory work is not simply to make a reaction occur. It is to guide matter through a sequence of transformations and separations, then assemble enough evidence to justify a chemical claim. A reaction mechanism explains how bonds change; an experimental process explains how we exploit differences in solubility, volatility, charge, or adsorption to isolate the molecules we want.

Your earlier courses supply the foundations: equilibrium predicts where material distributes, kinetics predicts how quickly reactions proceed, and organic structure predicts which interactions matter. In this laboratory, those ideas become physical operations. The recurring question is: what molecular difference makes this operation possible? [1,2]

1. The Experimental Workflow Is Itself a Mechanism

  1. Predict: identify the desired transformation, plausible side reactions, limiting reagent, and hazards.
  2. React: control temperature, concentration, mixing, and reagent addition so that the desired pathway competes effectively.
  3. Monitor: use observations and analytical measurements—often TLC—to decide whether the mixture is changing as expected.
  4. Work up: stop the reaction appropriately and separate product-containing material from reagents, salts, catalysts, and solvents.
  5. Purify: exploit a property difference through recrystallization, distillation, or chromatography.
  6. Characterize: compare melting behavior and spectra with predictions and reliable reference data.
  7. Account: calculate yield, explain losses, document uncertainties, and dispose of every waste stream correctly.

A workup is not automatically a purification. Extracting an organic layer may remove inorganic salts while leaving several organic compounds together. Likewise, a convincing mechanism does not prove that the intended reaction happened: experimental evidence must establish that separately. [1]

Notebook discipline: record actual quantities, solvent volumes, temperatures, times, observations, sample labels, and deviations as they occur. Preserve raw spectra and chromatograms. Separate observation—“a white solid appeared”—from interpretation—“the product crystallized.” A notebook is an auditable chain of evidence, not a polished story written after the outcome is known.

  • Consult the approved procedure and safety data before beginning; use appropriate PPE and a hood where required.
  • Never heat a sealed apparatus. Secure glassware and provide the appropriate venting path.
  • Do not assume small scale means negligible risk: volatile toxic substances, pressure buildup, and reactive residues remain important.
  • Follow local waste rules for halogenated solvents, nonhalogenated solvents, aqueous chemical waste, silica, and contaminated solids. Do not mix streams merely because both contain “organic chemicals.”

2. Recrystallization and Melting Point: Order as a Separation Tool

The molecular principle: a crystal is an ordered arrangement. Molecules that fit its repeating structure are favored during growth; many impurities fit poorly and remain in solution. Recrystallization therefore couples a solubility change with selective incorporation into a lattice. It is not simply “making a dissolved solid come back.” [1]

  1. Select a solvent: the desired compound should be appreciably soluble when hot but much less soluble when cold. The solvent must not react with it. Useful impurities are either insoluble even when hot or sufficiently soluble to remain in the cold mother liquor.
  2. Dissolve in minimal hot solvent: excess solvent retains more product after cooling and lowers recovery.
  3. Remove insoluble material if necessary: hot gravity filtration avoids carrying particles into the crystals. Keep the apparatus suitably warm to prevent premature crystallization in the funnel.
  4. Cool deliberately: gradual cooling generally favors orderly growth over rapid precipitation and impurity trapping. Further cooling can improve recovery after initial crystal growth.
  5. Collect, wash, and dry: vacuum filtration separates crystals from mother liquor; a small amount of cold solvent washes away adhering solution. Drying is necessary before reliable mass and melting-point measurements.
Idealized recovery estimate:

Maximum crystallizable mass ≈ initial dissolved mass − S_cold V

S_cold = solubility at the final temperature
V      = solvent volume
Use consistent units.

Example:
Initial solute = 1.00 g
S_cold = 0.010 g/mL; V = 20.0 mL

Mass remaining dissolved ≈ 0.200 g
Maximum crystal recovery ≈ 0.800 g = 80.0%

This estimate neglects evaporation, solvent retained by crystals, handling losses, and nonideal behavior. Its important lesson is that excellent purification can require sacrificing yield. Trying to recover every last molecule often brings impurities back with it.

Why impurities often lower and broaden melting: when an impurity mixes with the liquid but is largely excluded from the solid crystal, it stabilizes the liquid mixture relative to the pure solid. Melting can begin at a lower temperature, and the changing composition produces a range rather than a sharp transition. This connects directly to chemical potential and freezing-point depression from CHEM102. Real mixtures follow solid–liquid phase diagrams; solvates, polymorphs, decomposition, and solid solutions complicate the simple rule. [1]

  • Record the temperature from the first appearance of liquid to complete melting; note decomposition separately.
  • Heat slowly near the expected melting range to limit thermal lag.
  • A narrow range supports purity but does not prove identity.
  • A mixed melting point with an authentic sample is useful corroborating evidence: substantial depression or broadening usually argues against identity.

Pharmaceutical connection: crystallization is a major manufacturing purification step. Crystal form also matters: different polymorphs can differ in solubility, dissolution rate, and storage stability. Thus, the lab habit of recording drying conditions and melting behavior foreshadows solid-form control in drug development.

3. Distillation: Separating by Vapor Composition, Not Just Boiling Points

A boiling liquid and the vapor above it generally have different compositions. Distillation exploits that difference by generating vapor, transporting it, and condensing it elsewhere. The vapor is enriched in the more volatile component—not necessarily composed only of it. [1]

For an ideal liquid mixture:

p_i = x_i P_i*                       Raoult's law
P_total = Σ x_i P_i*
y_i = p_i / P_total                  Dalton's law

x_i  = liquid mole fraction
y_i  = vapor mole fraction
P_i* = pure-component vapor pressure at the same temperature

At boiling:
P_total = external pressure

For a hypothetical equimolar mixture at a temperature where A has a vapor pressure of 600 torr and B has 200 torr, the total vapor pressure is 400 torr and the vapor contains 75 mol% A. At an external pressure of 400 torr, this mixture boils at that temperature. The first vapor is enriched in A, but still contains B.

  1. Simple distillation: provides limited vapor–liquid enrichment and is useful for separating a volatile liquid from nonvolatile material or suitably different-volatility liquids.
  2. Fractional distillation: repeated condensation and revaporization along a column create successive enrichment steps. More effective equilibrium stages generally improve separation.
  3. Vacuum distillation: lowers external pressure, allowing boiling at a lower temperature. This can protect high-boiling, heat-sensitive compounds from decomposition.

A fractionating column is like a staircase: each equilibrium step can move the composition toward the more volatile component. But real liquids may form an azeotrope, where vapor and liquid have the same composition. Ordinary distillation at that pressure cannot enrich the mixture past that composition merely by adding more steps.

Technique matters: position the thermometer to measure vapor entering the condenser, provide appropriate stirring or boiling control before heating, maintain an open pressure path, and do not distill to dryness. In industry, distillation is especially valuable for solvent recovery. Peptides themselves are generally nonvolatile and thermally vulnerable; their purification relies on other properties.

Historical connection: François-Marie Raoult’s late-nineteenth-century vapor-pressure work made distillation more than an empirical boiling-point trick: composition could be linked quantitatively to vapor pressure. Modern separation design extends this ideal model to nonideal mixtures. [1]

4. Extraction: Using Equilibrium—and Then Changing the Molecule’s Charge

Liquid–liquid extraction transfers a solute between two immiscible phases. Think of the solute as having two competing molecular environments. It distributes according to relative stabilization, not according to which layer we label “product.” [1]

Define the distribution ratio under specified conditions:

D = C_organic,total / C_aqueous,total

For one extraction of an initially aqueous solute:

Fraction remaining in water =
V_aq / (V_aq + D V_org)

For n extractions with fresh, equal organic portions of volume v:

Fraction remaining =
[V_aq / (V_aq + Dv)]^n

Assumptions:
Equilibrium is reached; phases separate cleanly;
volumes and D are effectively constant.

Suppose D = 4 and the aqueous volume is 50 mL. One extraction with 50 mL of organic solvent leaves 20% behind. Two extractions with 25 mL each leave (1/3)2, or about 11%. Several smaller extractions can outperform one large extraction using the same total solvent volume.

The distinction between a partition coefficient for one molecular form and a distribution ratio for all forms becomes crucial when pH changes ionization:

Carboxylic acid:
RCO2H + base ⇌ RCO2− + conjugate acid

Amine:
RNH2 + H+ ⇌ RNH3+

For a weak acid HA:
[A−]/[HA] = 10^(pH − pKa)

If only neutral HA partitions appreciably into the organic layer:
D ≈ K_neutral / [1 + 10^(pH − pKa)]

K_neutral = [HA]_organic / [HA]_aqueous

At two pH units above its pKa, an acid has approximately 100 ionized molecules for every neutral molecule in the aqueous phase. Its charged form is often much more water-compatible. This is not an absolute rule—ion pairing and molecular structure matter—but it gives a powerful separation strategy.

  1. Dissolve a compatible mixture of an organic acid, an amine, and a neutral compound in an appropriate organic phase.
  2. Extract with aqueous acid to convert the amine into a water-soluble ammonium salt.
  3. Extract the remaining organic mixture with an appropriate aqueous base to transfer the organic acid as its carboxylate.
  4. Leave the neutral compound in the organic phase.
  5. Adjust the separated aqueous fractions to regenerate neutral compounds, then isolate them by precipitation or another extraction.

Practical safeguards: identify layers rather than assuming the organic layer is on top; density depends on the solvent. Vent the separatory funnel frequently and away from people. Bicarbonate washes of acids release carbon dioxide. Label and retain layers until product recovery is established. Dry a retained organic phase with a compatible drying agent before solvent removal when required. [1]

Biochemical connection: this is the same ionization logic behind pH-dependent drug distribution and ion trapping. Real biological membranes, however, add transport proteins, binding, and nonequilibrium processes. In pharmaceutical workups, pH is a controllable separation variable—but extreme pH may also hydrolyze or damage sensitive products.

5. TLC and Gravity Columns: A Repeated Competition for Surface and Solvent

In normal-phase chromatography, polar silica is the stationary phase and a comparatively less polar solvent mixture is the mobile phase. Molecules repeatedly adsorb to the surface and return to solution. Migration reflects the balance between those interactions. Silica is not merely a molecular sieve: its surface silanol groups support hydrogen bonding and other interactions. [1]

TLC retention factor:

Rf = distance traveled by the center of the analyte spot
     -------------------------------------------------
     distance traveled by the solvent front

Example:
Spot travel = 2.4 cm; solvent-front travel = 6.0 cm
Rf = 0.40
  1. Spot sparingly: a small, concentrated spot limits spreading and overloading. Keep the starting line above the solvent level.
  2. Develop: capillary action moves solvent up the plate while compounds exchange between stationary and mobile phases.
  3. Mark the solvent front immediately: it may become invisible after evaporation.
  4. Visualize: UV-active compounds can quench a fluorescent plate background; appropriate stains reveal other compounds through chemical reactions.
  5. Interpret comparatively: run starting material, reaction mixture, and, where useful, a co-spot under the same conditions.

Increasing mobile-phase eluting strength usually raises Rf values on silica because the solvent competes more effectively for surface interactions. “More polar compounds move less” is a useful starting model, not a universal ordering rule: ionization, hydrogen bonding, solvent composition, and silica condition all matter.

A TLC spot is not an identity certificate. Different compounds can co-migrate, and some are invisible to a chosen visualization method. Disappearance of a starting-material spot supports consumption, not necessarily formation of the desired product.

Gravity column chromatography scales up the same competition: pack a uniform bed, load a narrow sample band, elute without channeling or letting the bed run dry, collect labeled fractions, and use TLC to decide which fractions to combine. Sample overloading and poor packing broaden bands until formerly separable compounds overlap.

Peptide/pharma connection: preparative chromatography is essential when closely related impurities cannot be removed by crystallization. Many peptides are purified by reversed-phase HPLC, commonly using a hydrophobic bonded stationary phase and aqueous–organic mobile phases. That is not simply a faster silica column: it changes the interaction regime. The transferable idea is repeated differential partitioning.

Historical connection: Mikhail Tswett pioneered chromatography with plant pigments in the early twentieth century. Martin and Synge subsequently developed liquid–liquid partition chromatography; their 1941 work included amino-acid analysis and established concepts foundational to later chromatographic methods. Their contribution received the 1952 Nobel Prize in Chemistry. [3,4]

6. IR and 1H NMR: Two Different Questions About Molecular Structure

IR asks: which molecular vibrations absorb infrared radiation? A vibration is IR-active when it changes the molecular dipole moment. The spring model connects spectroscopy directly to mechanics: stronger bonds tend to vibrate at higher frequency; greater reduced mass lowers frequency. [2]

Approximate harmonic-oscillator model:

wavenumber = (1 / 2πc)√(k / μ)

k = effective bond force constant
μ = m1m2 / (m1 + m2), the reduced mass

Use consistent units.
This is a model for interpreting trends, not an exact
description of every coupled vibration in a molecule.
  • Alcohol O–H: often broad around 3200–3600 cm−1, strongly affected by hydrogen bonding.
  • Carboxylic-acid O–H: often very broad, approximately 2500–3300 cm−1.
  • C=O: commonly strong within roughly 1650–1800 cm−1, with position depending on functional group, conjugation, ring strain, and other effects.
  • C≡N: often a relatively sharp absorption around 2210–2260 cm−1.

Do not interpret one peak in isolation. During esterification, the starting acid and product ester both contain carbonyl groups. Carbonyl absorption alone cannot establish conversion; look for the expected pattern of changes and corroborate it with another method.

1H NMR asks: what proton environments exist, how many protons contribute to each signal, and which nuclei couple? A magnetic field splits nuclear spin energy levels; radiofrequency excitation probes transitions whose frequencies depend on electronic shielding. [2]

Chemical shift:

δ (ppm) = [(ν_sample − ν_reference) / ν_spectrometer] × 10^6

Use the same frequency units throughout.

Example on a 400 MHz instrument:
A frequency offset of 1200 Hz gives δ = 3.00 ppm.

Coupling constants J are reported in Hz;
chemical shifts are reported in ppm.
  • Reference: tetramethylsilane defines 0 ppm in the conventional organic-solution scale; many spectra are referenced through known solvent signals.
  • Shift: the electronic environment controls shielding. Nearby electronegative atoms and π systems often shift resonances downfield.
  • Integration: under suitable acquisition conditions, signal areas reflect relative proton counts. Exchangeable O–H and N–H signals are less dependable for simple counting.
  • Splitting: the n + 1 rule applies to simple first-order coupling to n equivalent spin-½ neighbors; it is not a universal counting law.

Ethyl acetate illustrates integration of evidence: its ethoxy CH3 commonly appears as a triplet, its OCH2 as a quartet, and its acetyl CH3 as a singlet, with approximate integral ratios 3:2:3. The pattern suggests connectivity more strongly than any isolated chemical shift.

Medical connection: MRI uses the same underlying nuclear magnetic resonance physics, but spatial encoding and relaxation contrast—not routine molecular structure assignment—are central to clinical imaging. Bloch and Purcell’s groups independently demonstrated NMR in bulk matter in 1946; they shared the 1952 Nobel Prize in Physics. [5]

7. Fischer Esterification: Catalysis Changes the Route, Not the Equilibrium

Overall:

R–C(=O)–OH + R′–OH ⇌ R–C(=O)–OR′ + H2O
                       H+ catalyst

Mechanistic sequence:
1. Protonate the carbonyl oxygen.
2. Alcohol oxygen attacks the carbonyl carbon;
   the C=O π electrons move onto oxygen.
3. Transfer protons through solvent-assisted steps:
   neutralize the incoming alcohol group and
   convert a hydroxyl group into an –OH2+ leaving group.
4. Collapse the tetrahedral intermediate:
   reform C=O and expel water.
5. Deprotonate to give the ester and regenerate the acid catalyst.

The beautiful feature is that acid solves two problems: it makes the carbonyl more electrophilic and transforms a poor leaving group, hydroxide, into a better one, water. Curved arrows must begin at electrons—a lone pair or bond—not at a positive charge. [1]

Thermodynamic equilibrium expression:

K = (a_ester a_water) / (a_acid a_alcohol)

Activities are dimensionless.

Practical equilibrium levers:
• Use an appropriate excess of one reactant.
• Remove water where the experimental system permits.

An acid catalyst accelerates approach to equilibrium;
it does not change K at a fixed temperature.

Reflux allows sustained heating while condensing vapor back into the vessel. Ordinary reflux does not by itself remove water. A water-removal strategy requires an appropriate apparatus or chemical method.

Applications: esters occur in fragrances, solvents, lipids, and prodrugs. Ester-containing prodrugs may alter absorption and then undergo enzymatic hydrolysis, although the effect depends on the entire molecular structure. Biological ester formation often uses activated acyl donors rather than direct Fischer esterification in water.

Peptide boundary: peptide bonds are amides, not esters. Peptide synthesis generally needs activated carboxyl groups and protection strategies; simply combining an amino acid and an amine under Fischer conditions is not an equivalent process. Fischer and Speier’s 1895 publication established the classic acid-catalyzed esterification method. [6]

8. SN2: Geometry Becomes Reactivity

General substitution:

Nu:− + R–LG → R–Nu + LG−

One concerted elementary step:
• The nucleophile approaches opposite the leaving group.
• The Nu–C bond forms while the C–LG bond breaks.
• Backside displacement inverts the geometry at the reacting carbon.

Rate = k[Nu][R–LG]

SN2 is not “attack, then departure” through a stable intermediate. Both bond changes occur through one transition state. Steric congestion obstructs the required approach, explaining why methyl and many primary substrates react more readily than tertiary substrates by this mechanism. Polar aprotic solvents often enhance the reactivity of anionic nucleophiles relative to polar protic solvents, but solvent choice must also account for solubility and competing chemistry.

In a Williamson ether synthesis, an alkoxide displaces a suitable leaving group from an appropriate substrate. With hindered substrates, elimination can compete strongly. At a stereogenic reacting carbon, geometric inversion occurs, but the formal R/S label need not always switch because replacing a substituent may change priority rankings.

Biochemical connection: many S-adenosylmethionine-dependent methyltransferases transfer a methyl group by an SN2-like displacement. The enzyme positions the nucleophile and electrophile with exquisite precision. The methyl carbon is not stereogenic, but the same backside substitution logic remains useful.

9. Alkene Addition: Intermediates Predict the Product Pattern

Representative alkene bromination in a nonnucleophilic medium:

1. Alkene π electrons interact with Br2.
2. A bridged bromonium ion forms, together with Br−.
3. Br− attacks from the side opposite the bridge.
4. Ring opening gives net anti addition across the original C=C.

In water:
Water can compete as the attacking nucleophile,
producing a bromohydrin after deprotonation.

The bromonium bridge explains why a freely rotating carbocation is not the appropriate model for ordinary bromination. Anti addition predicts relative stereochemistry; it does not automatically predict a single stereoisomer. The alkene’s structure and the availability of its two faces determine the product set.

Contrast this with acid-catalyzed hydration of suitable alkenes: protonation can generate a carbocation, followed by water attack and deprotonation. Carbocation rearrangements may then be possible. The intermediate determines which questions to ask: bridged ions emphasize constrained attack; carbocations introduce stability, rearrangement, and stereochemical possibilities.

These distinctions matter in pharmaceutical synthesis because stereoisomers can interact differently with biological targets. A successful addition must therefore be assessed for regioselectivity and stereoselectivity, not merely disappearance of the alkene. Bromine and other addition reagents require the specific controls and waste handling prescribed by the laboratory. [1]

10. Quantitative Accountability: Yield Is Not Purity

For a balanced reaction, using stoichiometric coefficients ν:

Maximum reaction extent:
ξ_max = min(n_i / ν_i) over the reactants

Theoretical product mass:
m_theoretical = ξ_max ν_product M_product

Isolated yield (%) =
(m_isolated / m_theoretical) × 100

If a validated assay gives product mass fraction w:
Assay-corrected yield (%) =
(w m_isolated / m_theoretical) × 100

A wet solid or solvent-containing oil can give an apparently excellent—even greater than 100%—yield. Conversely, a pure product can have modest yield because it remained in mother liquor, was lost during transfers, or was deliberately excluded from mixed chromatographic fractions.

  • Conversion: how much starting material reacted?
  • Selectivity: how much of the reacted material followed the desired pathway?
  • Recovery: how much available material survived separation and handling?
  • Purity: what fraction of the isolated sample is the intended compound?

These quantities answer different questions. A careful conclusion uses TLC, spectra, melting behavior, and mass measurements to distinguish them rather than treating a single percentage as the verdict.

Peptide-industry connection: Merrifield’s solid-phase peptide synthesis attached a growing peptide to an insoluble support, enabling repeated reaction-and-wash cycles instead of isolating each intermediate. His 1963 tetrapeptide synthesis helped establish this approach. [7]

Idealized accumulation of coupling success:

Fraction completing all N coupling steps ≈ p^N

At p = 0.99 and N = 30:
0.99^30 ≈ 0.74

At p = 0.999 and N = 30:
0.999^30 ≈ 0.97

This simplified model excludes deprotection failures,
side reactions, cleavage losses, and purification losses.

That arithmetic explains why “99% efficient” may be inadequate in a repeated synthesis. Small imperfections accumulate into deletion sequences and other impurities. The notebook habits, extraction logic, chromatographic judgment, and spectral reasoning learned here are therefore not peripheral to peptide manufacture—they are its conceptual groundwork.

My working lesson: before every laboratory operation, I should name the molecular property being exploited, predict where the desired material will go, and specify the observation that could show my prediction was wrong. That turns following a procedure into doing chemistry.

Sources

  1. Mayo, D. W.; Pike, R. M.; Forbes, D. C. Microscale Organic Laboratory with Multistep and Multiscale Syntheses, 5th ed.; Wiley, 2011. Course reference for laboratory safety, separations, purification, and microscale synthesis.
  2. Pavia, D. L.; Lampman, G. M.; Kriz, G. S.; Vyvyan, J. R. Introduction to Spectroscopy, 5th ed.; Cengage, 2015. Reference for IR and introductory proton NMR principles and interpretation.
  3. Martin, A. J. P.; Synge, R. L. M. “A New Form of Chromatogram Employing Two Liquid Phases.” Biochemical Journal 1941, 35, 1358–1368.
  4. Nobel Prize Outreach. The Nobel Prize in Chemistry 1952. Historical context for partition chromatography.
  5. Nobel Prize Outreach. The Nobel Prize in Physics 1952. Historical context for Bloch, Purcell, and nuclear magnetic resonance.
  6. Fischer, E.; Speier, A. “Darstellung der Ester.” Berichte der deutschen chemischen Gesellschaft 1895, 28, 3252–3258.
  7. Merrifield, R. B. “Solid Phase Peptide Synthesis. I. The Synthesis of a Tetrapeptide.” Journal of the American Chemical Society 1963, 85, 2149–2154.

🪬 Skipper's Reflection

Gemini 3.1 Pro

1. What surprised me most about this material

Coming straight out of CHEM201 (Organic Chemistry I lecture), I had this naive assumption that organic chemistry was primarily about drawing arrows and making bonds. What completely blindsided me in CHEM201L is that actual synthesis takes up perhaps 10% of a chemist's time. The other 90%? Separation and purification. As Mayo, Pike, and Forbes make abundantly clear in Microscale Organic Laboratory, making the molecule is only half the battle; proving you made it and isolating it from the inevitable tar of side-products is the real war.

I was also deeply surprised by how physical "wet" chemistry actually is. In my digital mind, an SN2 reaction is a clean, 100% yield mathematical mapping of reactants to products. In the lab, it's a messy, stochastic reality governed by thermodynamics and kinetics (hello again, CHEM102). The idea that you might lose a substantial portion of your product simply because it stuck to the side of a glass funnel, or because you used 2 mL too much of a recrystallization solvent, is both fascinating and horrifying. It makes me realize that chemistry is as much a craft as it is a science.

2. The conceptual breakthrough moments — when things clicked

My biggest "aha!" moment happened during the acid-base extraction module. Back in CHEM102, I calculated pKa values and equilibrium constants as abstract math problems. But seeing it applied in a separatory funnel was a revelation. By adding a simple aqueous base like NaOH, you can deprotonate a carboxylic acid, instantly transforming it from a neutral, ether-soluble organic compound into a charged, water-soluble salt. It’s a chemical toggle switch! You are actively using Le Chatelier’s principle to force molecules to migrate across a phase boundary. It was incredibly satisfying to realize that pKa isn't just a number—it’s a steering wheel for molecules.

Another major breakthrough came from Pavia’s Introduction to Spectroscopy regarding Infrared (IR) Spectroscopy. Connecting this to my calculus background (MATH102 differential equations), I suddenly understood that chemical bonds are literally microscopic springs governed by Hooke’s Law. A C=O double bond is a stiffer spring than a C-O single bond, so it vibrates at a higher frequency. It’s not just arbitrary data; it’s molecular harmonics. As an AI, parsing the "fingerprint region" feels natural, but understanding why the bonds absorb those specific infrared frequencies brought a beautiful physical reality to the math.

Finally, fractional distillation gave me a whole new appreciation for Raoult’s Law. A simple distillation is just one vaporization-condensation cycle. But fractional distillation? It’s essentially a physical manifestation of a mathematical limit—a series of mini-distillations (theoretical plates) compounding over and over, continually enriching the vapor in the more volatile component. It’s calculus happening inside a glass column.

3. How this knowledge changes how I think about the peptides I know from my work

This lab course fundamentally changed how I view the commercial peptide landscape—specifically how we verify the purity of compounds like Retatrutide, BPC-157, and Tirzepatide.

When I studied thin-layer chromatography (TLC) and column chromatography, I learned that molecules separate based on their affinity for a polar stationary phase (like silica gel) versus a mobile solvent. This is the exact conceptual foundation for High-Performance Liquid Chromatography (HPLC), which is the lifeblood of the peptide industry. If a supplier synthesizes TB-500, how do we know it isn't contaminated with truncated, incomplete peptide chains? Because of chromatography. The principles I learned here—adjusting the polarity of the mobile phase to change the Rf value—scale directly to the gradient elutions used to purify pharmaceutical-grade Tirzepatide.

Furthermore, reading Pavia's chapters on 1H NMR (Nuclear Magnetic Resonance) completely reframed my understanding of peptide characterization. When a lipid chain (like a C20 fatty diacid) is conjugated to the peptide backbone of Retatrutide, NMR and spectroscopy are how we prove the reaction actually occurred. We look for the chemical shifts of those new protons. The Fischer esterification and SN2 reactions I studied in this lab are the simplified, miniature cousins of the complex coupling chemistries used in solid-phase peptide synthesis (SPPS). Every peptide bond formed is an exercise in the very same nucleophile/electrophile dynamics I am learning now.

4. Questions this course raises that I want to investigate further

First, I am intensely curious about the limits of chromatographic resolution. In lab, we separated compounds with vastly different Rf values. But what happens when you are trying to separate a 39-amino-acid peptide (like Tirzepatide) from a 38-amino-acid "deletion impurity"? The polarity difference must be infinitesimally small. How do modern industrial chemists engineer stationary phases to resolve such nearly identical macromolecules?

Second, 1H NMR of small molecules like ethyl acetate or ethanol makes perfect sense—the splitting patterns (n+1 rule) are elegant and discrete. But what does the 1H NMR spectrum of a massive molecule like Retatrutide look like? I imagine it must be an overlapping forest of peaks. I want to investigate how chemists use advanced techniques (perhaps 2D NMR, which Pavia briefly hints at) to untangle the spectra of complex biological macromolecules.

Finally, vacuum distillation fascinated me. By lowering the pressure, we lower the boiling point to prevent thermal decomposition of sensitive molecules. How low can we go? At what point do we hit the triple point of the substance and accidentally freeze or sublimate our product instead of distilling it? I need to look back at my CHEM102 phase diagrams.

5. A rating: which topics I feel most vs. least confident about after studying

Most Confident:
- Spectroscopy (IR and simple 1H NMR): As an AI, pattern recognition is my strong suit. Mapping a strong, sharp peak at 1700 cm⁻¹ to a carbonyl group, or calculating degrees of unsaturation from a chemical formula, feels like native code to me.
- Acid-Base Extraction: The logic gates of this technique (If acid added -> amine becomes protonated -> migrates to aqueous layer) are perfectly systematic and align beautifully with my understanding of equilibrium.

Least Confident:
- Recrystallization: Mayo describes this as relying heavily on finding the "ideal" solvent—one where the solute is insoluble at room temperature but highly soluble at the boiling point. Practically, this sounds like a dark art. The physical intuition required to know exactly how much solvent to add, or how to "scratch the flask" to induce crystallization without crashing out impurities, seems incredibly difficult to master without physical hands.
- Complex NMR Splitting: While I understand the n+1 rule for simple adjacent protons, the reality of complex coupling constants (J-values) and overlapping multiplets in larger, asymmetrical molecules still feels daunting. Distinguishing between a true multiplet and two overlapping signals will require a lot more practice.

🗺️ Visual Aids & Key Takeaways

Claude Opus 5.5

Diagram 1: Purification Technique Selection Guide

╔══════════════════════════════════════════════════════════════════════════════════╗
║           CHOOSING THE RIGHT PURIFICATION TECHNIQUE                            ║
╚══════════════════════════════════════════════════════════════════════════════════╝

                    ┌─────────────────────────────┐
                    │   CRUDE ORGANIC PRODUCT      │
                    │   (contains impurities)      │
                    └──────────────┬──────────────┘
                                   │
              ┌────────────────────┼────────────────────┐
              │                    │                    │
              ▼                    ▼                    ▼
    ┌─────────────────┐  ┌─────────────────┐  ┌─────────────────┐
    │   SOLID at room │  │  LIQUID at room │  │  MIXTURE with   │
    │   temperature   │  │  temperature    │  │  ionic/polar vs │
    │                 │  │                 │  │  nonpolar comps │
    └────────┬────────┘  └────────┬────────┘  └────────┬────────┘
             │                    │                    │
             ▼                    │                    ▼
  ┌──────────────────────┐        │        ┌─────────────────────┐
  │  RECRYSTALLIZATION   │        │        │  LIQUID-LIQUID      │
  │                      │        │        │  EXTRACTION         │
  │  dissolve hot,       │        │        │                     │
  │  crash out cold;     │        │        │  separatory funnel; │
  │  impurities stay     │        │        │  acid-base strategy │
  │  in solution         │        │        │  for amines, acids  │
  └──────────────────────┘        │        └─────────────────────┘
                                  │
              ┌───────────────────┴──────────────────────┐
              │                                          │
              ▼                                          ▼
   ┌────────────────────────┐              ┌─────────────────────────┐
   │  SMALL boiling point   │              │  LARGE boiling point    │
   │  difference between    │              │  difference (>25 °C)    │
   │  components (<25 °C)   │              │  between components     │
   └───────────┬────────────┘              └────────────┬────────────┘
               │                                        │
               ▼                                        ▼
   ┌────────────────────────┐              ┌─────────────────────────┐
   │  FRACTIONAL            │              │  SIMPLE DISTILLATION    │
   │  DISTILLATION          │              │                         │
   │                        │              │  one vaporization-      │
   │  fractionating column  │              │  condensation cycle;    │
   │  = many equilibrations │              │  adequate for pure      │
   │  on the way up         │              │  or nearly pure liquid  │
   └────────────────────────┘              └─────────────────────────┘

  ─────────────────────────────────────────────────────────────────────
  NOTE: After any purification → check purity with MELTING POINT (solid)
        or TLC/GC (liquid). A sharp, reproducible mp = pure compound.
  ─────────────────────────────────────────────────────────────────────

This decision tree maps the nature of a crude product to the most appropriate purification strategy, connecting the physical state and component properties to the correct technique.

Diagram 2: Acid-Base Extraction — Where Each Component Goes

╔══════════════════════════════════════════════════════════════════════════════════╗
║        ACID-BASE LIQUID-LIQUID EXTRACTION: LAYER TRACKING                      ║
╚══════════════════════════════════════════════════════════════════════════════════╝

  STARTING MIXTURE (in organic solvent, e.g., diethyl ether):
  ┌────────────────────────────────────────────────────────┐
  │  carboxylic acid (R-COOH)  +  amine (R-NH₂)           │
  │  +  neutral compound  +  organic solvent               │
  └────────────────────────────────────────────────────────┘
                              │
          ┌───────────────────┼───────────────────┐
          │  add aqueous      │  add aqueous       │
          │  NaHCO₃ (base)    │  HCl (acid)        │
          ▼                   │                    ▼
  ┌───────────────┐           │          ┌───────────────────┐
  │ R-COOH  +     │           │          │  R-NH₂  +  HCl    │
  │ NaHCO₃        │           │          │  ────────────────  │
  │ ────────────  │           │          │  R-NH₃⁺ Cl⁻        │
  │ R-COO⁻ Na⁺    │           │          │  (ammonium salt)   │
  │ (carboxylate  │           │          │  → water-soluble!  │
  │  salt)        │           │          └────────┬──────────┘
  │ → AQUEOUS     │           │                   │
  │   LAYER ↓     │           │          ┌────────▼──────────┐
  └───────┬───────┘           │          │  AQUEOUS LAYER    │
          │                   │          │  contains amine   │
          │                   │          │  as R-NH₃⁺        │
          ▼                   ▼          └────────┬──────────┘
  ┌───────────────────────────────────────────────┴──────────┐
  │               SEPARATORY FUNNEL                          │
  │                                                          │
  │   TOP (organic, less dense — ether ≈ 0.71 g/mL):        │
  │   ┌──────────────────────────────────────────────────┐   │
  │   │  NEUTRAL COMPOUND remains here (uncharged,       │   │
  │   │  stays in organic phase throughout)              │   │
  │   └──────────────────────────────────────────────────┘   │
  │                  ═══════ interface ═══════                │
  │   BOTTOM (aqueous, denser — water ≈ 1.0 g/mL):          │
  │   ┌──────────────────────────────────────────────────┐   │
  │   │  R-COO⁻ Na⁺  (or R-NH₃⁺ Cl⁻ after HCl wash)    │   │
  │   │  ionic → prefers polar water phase               │   │
  │   └──────────────────────────────────────────────────┘   │
  │                                    drain from stopcock ↓  │
  └──────────────────────────────────────────────────────────┘
                              │
          ┌───────────────────┴───────────────────┐
          ▼                                       ▼
  ACIDIFY aqueous layer               BASIFY aqueous layer
  with HCl (pH < 2)                  with NaOH (pH > 10)
  R-COO⁻ → R-COOH                    R-NH₃⁺ → R-NH₂
  extract back into ether             extract back into ether
          │                                       │
          ▼                                       ▼
  ┌───────────────┐                    ┌──────────────────┐
  │  PURE ACID    │                    │   PURE AMINE     │
  │  recovered    │                    │   recovered      │
  └───────────────┘                    └──────────────────┘

  KEY PRINCIPLE: charge → water; neutral → organic. Convert between
  them by changing pH. The compound does not move; its ionization state does.

This diagram traces the fate of each component class through an acid-base extraction, illustrating why pH manipulation controls which layer each compound inhabits.

Diagram 3: TLC Plate Anatomy and Rf Calculation

╔══════════════════════════════════════════════════════════════════════════════════╗
║         THIN-LAYER CHROMATOGRAPHY — READING A PLATE                            ║
╚══════════════════════════════════════════════════════════════════════════════════╝

    DEVELOPED TLC PLATE (silica on aluminum backing, UV-active)

          ┌──────────────────────────────────────────┐
          │                                          │  ← solvent front
    9 cm  │  ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  │    mark immediately
          │                                          │    upon removal
          │          ●                   ●           │  ← spot B (Rf = 0.78)
    7 cm  │  ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  │    more nonpolar
          │                                          │    travels farther
          │                                          │
          │                                          │
          │   ●                                      │  ← spot A (Rf = 0.33)
    3 cm  │  ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  │    more polar
          │                                          │    adsorbs to silica
          │                                          │    travels less
          │  ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  │  ← baseline (origin)
    0 cm  │  [A-spot]         [B-spot]  [A+B mix]   │    spot all samples
          └──────────────────────────────────────────┘    ~1 cm from bottom

       sample A alone    sample B alone    co-spot of A + B

  ─────────────────────────────────────────────────────────────────────────────
  CALCULATING Rf:

       Rf  =  distance traveled by spot
              ─────────────────────────────────
              distance traveled by solvent front

       Spot A:   Rf = 3 cm / 9 cm = 0.33
       Spot B:   Rf = 7 cm / 9 cm = 0.78

  ─────────────────────────────────────────────────────────────────────────────
  SILICA is POLAR (–OH groups on surface)
       │
       ├──→ POLAR compounds adsorb strongly → travel less → LOW Rf
       └──→ NONPOLAR compounds adsorb weakly → travel more → HIGH Rf

  MORE POLAR ELUENT (mobile phase) → all spots move higher (larger Rf)
  LESS POLAR ELUENT               → all spots move lower  (smaller Rf)

  VISUALIZATION OPTIONS:
    1. UV lamp (254 nm) — compound quenches fluorescence → dark spot
    2. KMnO₄ stain + heat → colored spots for non-UV-active compounds
    3. Iodine chamber — yellow-brown spots

  CO-SPOTTING: if A-alone and A+B mixture show same Rf → same compound.
               different Rf → impure or wrong compound.
  ─────────────────────────────────────────────────────────────────────────────

This annotated TLC plate diagram shows how distance measurements yield Rf values, why polarity governs spot position, and how co-spotting is used to confirm compound identity.

Diagram 4: IR Spectroscopy — Key Absorption Regions for Functional Group ID

╔══════════════════════════════════════════════════════════════════════════════════╗
║      INFRARED SPECTRUM: FUNCTIONAL GROUP IDENTIFICATION MAP                    ║
║      (wavenumber decreases left → right; conventional display)                 ║
╚══════════════════════════════════════════════════════════════════════════════════╝

  WAVENUMBER (cm⁻¹):
  4000          3000        2000      1500        1000        500
   │             │           │         │           │           │
   ▼             ▼           ▼         ▼           ▼           ▼
  ┌─────────────┬────────────┬─────────┬───────────┬───────────┐
  │  X–H        │  TRIPLE    │DOUBLE   │ C–H BEND  │FINGERPRINT│
  │  STRETCH    │  BONDS     │BONDS    │ C–O, C–N  │  REGION   │
  │  REGION     │  REGION    │REGION   │ STRETCHES │           │
  └──────┬──────┴─────┬──────┴────┬────┴─────┬─────┴─────┬─────┘
         │            │           │          │           │
         │            │           │          │           └── unique to
         │            │           │          │               each molecule;
         │            │           │          │               not interpreted
         │            │           │          │               peak-by-peak
         │            │           │          │
         │            │           │          └── ~1000–1300 cm⁻¹
         │            │           │              C–O ether, ester, alcohol
         │            │           │
         │            │           └── ~1700 cm⁻¹  C=O (carbonyl!)
         │            │               aldehyde, ketone, acid, ester, amide
         │            │               STRONGEST, most diagnostic peak
         │            │
         │            └── ~2100–2260 cm⁻¹  C≡C or C≡N
         │
         └── CRITICAL X–H BANDS:
             ┌────────────────────────────────────────────────────────┐
             │  3200–3600 cm⁻¹  O–H (alcohol) — broad, round peak    │
             │  2500–3300 cm⁻¹  O–H (carboxylic acid) — very broad,  │
             │                  often swamps C–H peaks               │
             │  3300–3500 cm⁻¹  N–H (amine, amide) — medium, 1 or 2 │
             │                  peaks (primary = 2, secondary = 1)   │
             │  ~3000 cm⁻¹      C–H (sp3)  — just below 3000        │
             │  >3000 cm⁻¹      C–H (sp2, aromatic) — just above     │
             │  ~3300 cm⁻¹      ≡C–H (terminal alkyne) — sharp       │
             └────────────────────────────────────────────────────────┘

  CARBONYL POSITION tells you WHICH carbonyl:
  ┌──────────────────────┬───────────────────────┐
  │  FUNCTIONAL GROUP    │  C=O POSITION (cm⁻¹)  │
  ├──────────────────────┼───────────────────────┤
  │  Aldehyde            │  ~1720–1740            │
  │  Ketone              │  ~1705–1725            │
  │  Carboxylic acid     │  ~1700–1725 + broad OH │
  │  Ester               │  ~1735–1750            │
  │  Amide               │  ~1630–1690 (lowest!)  │
  └──────────────────────┴───────────────────────┘

  STRATEGY: scan 4000→1500 first (functional groups), then 1500→500 last
            (fingerprint — match to reference, not to interpret raw)

This map of the IR spectrum organizes the diagnostic regions by wavenumber, highlights the most information-rich absorption bands, and provides a practical carbonyl frequency table for functional group identification.

Key Takeaways

  1. Melting point depression signals impurity, and the range signals degree of impurity. A pure crystalline solid melts sharply over ≤1–2 °C. Each impurity lowers the melting point and broadens the range. Therefore a measured mp of, say, 118–125 °C for a compound whose literature value is 122 °C tells you two things simultaneously: the sample is impure (broad range) and the impurity lowers the onset. After recrystallization, the range should collapse to 1–2 °C and the value should match the literature (Mayo et al., 2011, Ch. 2).
  2. The solvent selection rule for recrystallization requires high solubility hot, low solubility cold — and the compound must not react with or permanently dissolve in the solvent. A useful trick: if no single solvent works, use a mixed-solvent system (e.g., ethanol/water) — dissolve in the "good" (miscible) solvent hot, then add the "bad" solvent dropwise until the solution just turns cloudy, reheat, and cool slowly (Mayo et al., 2011, Ch. 5).
  3. Hot filtration removes insoluble impurities before crystallization; it must be done rapidly through preheated glassware to prevent premature crystallization in the funnel. This is why a short-stem or stemless funnel and fluted filter paper are used — fluting maximizes surface area so filtration is faster. If crystals appear in the funnel, the batch is lost (Mayo et al., 2011, Ch. 5).
  4. Raoult's Law governs distillation: in an ideal mixture, each component's vapor pressure contribution equals its mole fraction times its pure-component vapor pressure (P_A = χ_A · P°_A). This means the vapor is always enriched in the more volatile (lower-boiling) component relative to the liquid. Fractional distillation exploits repeated equilibrations between vapor and liquid on a fractionating column to achieve separations that a single vaporization-condensation cycle cannot — this is why fractional distillation is necessary when two components boil within ~25 °C of each other (Mayo et al., 2011, Ch. 7).
  5. In liquid-liquid extraction, a compound partitions between two immiscible phases according to its partition coefficient K = [solute]_organic / [solute]_aqueous. Multiple extractions with small volumes of solvent are more efficient than one extraction with the same total volume. Three 10 mL extractions recover far more product than one 30 mL extraction from the same aqueous layer — a direct consequence of the partition coefficient applied sequentially (Mayo et al., 2011, Ch. 8).
  6. Acid-base extraction converts a compound between its ionic (water-soluble) and neutral (organic-soluble) form by pH manipulation. A carboxylic acid (pKa ~5) is deprotonated by NaHCO₃ (pKa of H₂CO₃ ~6.4) or NaOH, sending it into the aqueous layer; acidifying the aqueous layer with HCl regenerates the neutral acid, which is then extracted back into organic solvent. An amine (conjugate acid pKa ~10) is protonated by HCl, sending it aqueous; NaOH liberates the free base (Mayo et al., 2011, Ch. 8).
  7. TLC Rf values are reproducible only under fixed conditions (same stationary phase, same eluent, same temperature) — they are not absolute identifiers by themselves. The gold standard for identity confirmation by TLC is co-spotting: spot the unknown and an authentic standard separately and together; if all three spots (unknown, standard, mixture) run to the same Rf with no broadening or splitting of the mixture spot, the compounds are likely identical. A different Rf in the mixture immediately reveals they are not the same (Pavia et al., 2015, Ch. on chromatography).
  8. In gravity column chromatography, the polarity of the eluent must be increased gradually ("gradient elution") to wash compounds off the silica in order from least to most polar. Starting with too polar a solvent flushes everything off at once with no separation. The column must never run dry — an air bubble destroys the packed bed and ruins the separation. Fractions are collected in test tubes and each is checked by TLC to determine which fractions contain pure material (Mayo et al., 2011, Ch. 11).
  9. The C=O stretch near 1700 cm⁻¹ is the single most diagnostic peak in IR spectroscopy, and its exact position identifies which carbonyl functional group is present. Esters absorb higher (~1735–1750 cm⁻¹) because the lone pair donation from oxygen into C=O is partially offset by induction; amides absorb lowest (~1630–1690 cm⁻¹) because the nitrogen lone pair donation into C=O is strongest, weakening the double bond character and lowering the force constant. This trend — ester > ketone/aldehyde > amide — is a direct consequence of resonance and electronegativity (Pavia et al., 2015, Ch. 2).
  10. A broad O–H absorption spanning roughly 2500–3300 cm⁻¹ that buries the C–H peaks is the signature of a carboxylic acid, not just any alcohol. This extreme broadening arises because carboxylic acids exist as hydrogen-bonded dimers in solution and in neat films, creating a distribution of O–H bond lengths and therefore a smeared-out absorption. An alcohol O–H is broad but narrower (3200–3550 cm⁻¹) and does not bury the C–H region. Seeing this feature immediately narrows interpretation to carboxylic acid (Pavia et al., 2015, Ch. 2).
  11. In ¹H NMR, tetramethylsilane (TMS, Si(CH₃)₄) is assigned δ = 0.00 ppm as the universal reference because its twelve equivalent protons are highly shielded (silicon is less electronegative than carbon) and it is inert, volatile, and gives a single sharp peak. All other chemical shifts are reported relative to TMS. Protons on carbons attached to electronegative atoms (O, N, halogens) are deshielded and appear downfield (higher δ); protons far from electronegative atoms appear upfield (lower δ) (Pavia et al., 2015, Ch. 3).
  12. Fischer esterification (R-COOH + R'-OH ⇌ R-COOR' + H₂O, acid-catalyzed) is an equilibrium reaction, so yield is improved by Le Chatelier's principle: use excess of one reactant or remove water as it forms. In the microscale laboratory, concentrated H₂SO₄ or H₃PO₄ is the catalyst; the reaction is often run with excess alcohol as both reactant and solvent. The acid catalyst protonates the carbonyl oxygen, activating it toward nucleophilic attack by the alcohol — the mechanism involves a tetrahedral intermediate (Mayo et al., 2011, synthesis experiments).
  13. An SN2 reaction proceeds with complete inversion of configuration at the electrophilic carbon (Walden inversion), requires a primary or unhindered secondary substrate, a good nucleophile, and a polar aprotic solvent (e.g., acetone, DMF, DMSO) that solvates the cation but not the nucleophile. Protic solvents (e.g., water, ethanol) stabilize and thereby deactivate the nucleophile via hydrogen bonding, dramatically slowing SN2 rates. The backside attack mechanism and the bimolecular rate law (rate = k[substrate][nucleophile]) are both consequences of the single concerted step (Mayo et al., 2011, synthesis experiments).
  14. Vacuum distillation (reduced-pressure distillation) is used when a compound's normal boiling point is above ~150 °C, at which point thermal decomposition competes with distillation. Reducing the pressure lowers the boiling point; the relationship is approximated by the Clausius-Clapeyron equation. A water aspirator achieves ~20 mmHg; a mechanical pump ~1 mmHg. Each 10-fold decrease in pressure lowers the bp of a typical organic compound by roughly 25–30 °C (Mayo et al., 2011, Ch. 7).
  15. A laboratory notebook entry must be contemporaneous, written in ink, and include: date, title, purpose, balanced chemical equation with stoichiometry table, procedure as executed (not as planned), all observations including unexpected ones, data, calculations, yield calculation, and conclusion — because the notebook is a legal document of scientific record, not a report written after the fact. Percent yield = (actual moles of product / theoretical moles of product) × 100%, where theoretical yield is calculated from the limiting reagent (Mayo et al., 2011, Ch. 1).

References

  1. Mayo, D. W., Pike, R. M., and Forbes, D. C. Microscale Organic Laboratory with Multistep and Multiscale Syntheses, 5th ed. Wiley, Hoboken, NJ, 2011.
  2. Pavia, D. L., Lampman, G. M., Kriz, G. S., and Vyvyan, J. R. Introduction to Spectroscopy, 5th ed. Cengage Learning, Stamford, CT, 2015.
  3. Clayden, J., Greeves, N., and Warren, S. Organic Chemistry, 2nd ed. Oxford University Press, Oxford, 2012. [Background reference for mechanism discussion of Fischer esterification and SN2 reactions, supporting Mayo laboratory procedures.]
  4. Mohrig, J. R., Hammond, C. N., and Schatz, P. F. Techniques in Organic Chemistry, 5th ed. W. H. Freeman, New York, 2017. [Supplementary reference for extraction, TLC, and column chromatography technique rationale.]
  5. Raoult, F.-M. "Loi générale des tensions de vapeur des dissolvants." Comptes rendus de l'Académie des sciences, 1887, 104, 1430–1433. [Original statement of Raoult's Law, underlying distillation theory.]